Merged in develop (pull request #12)

Develop

ASCOM.MeadeAutostar497.Focuser.Validation.txt

@@ -1,68 +0,0 @@
-Conform Report Hash (V1): 55AB333E4394ADF3F35929567EAB46A092F3574DF38E1F00BF586967B7EE826AA2D92647409F699E62954B07AF3389CEA7DB7FAAFFE04E05BE358A744E95A624
-
- 
-ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:34
-ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
- 
-ConformanceCheck Driver ProgID: ASCOM.MeadeAutostar497.Telescope
- 
-Error handling 
-Error number for "Not Implemented" is: 80040400
-Error number for "Invalid Value 1" is: 80040404
-Error number for "Value Not Set 1" is: 80040402
-Error number for "Value Not Set 2" is: 80040403
-Error messages will not be interpreted to infer state.
- 
-00:21:34.375 Driver Access Checks              OK       
-00:21:35.008 AccessChecks                      OK       Successfully created driver using late binding
-00:21:35.253 AccessChecks                      OK       Successfully connected using late binding
-00:21:35.257 AccessChecks                      INFO     The driver is a .NET object
-00:21:35.260 AccessChecks                      INFO     The AssemblyQualifiedName is: ASCOM.MeadeAutostar497.Telescope, ASCOM.MeadeAutostar497.Telescope, Version=
-00:21:35.265 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.ITelescopeV3
-00:21:35.269 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.IFocuserV3
-00:21:35.992 AccessChecks                      INFO     Device does not expose IFocuser interface
-00:21:36.147 AccessChecks                      INFO     Device does not expose IFocuserV2 interface
-00:21:36.479 AccessChecks                      INFO     Device exposes IFocuserV3 interface
-00:21:36.692 AccessChecks                      OK       Successfully created driver using driver access toolkit
-00:21:36.895 AccessChecks                      OK       Successfully connected using driver access toolkit
-00:21:36.958 AccessChecks                      OK       Successfully disconnected using driver access toolkit
- 
-Conform is using ASCOM.DriverAccess.Focuser to get a Focuser object
-00:21:37.078 ConformanceCheck                  OK       Driver instance created successfully
-00:21:37.311 ConformanceCheck                  OK       Connected OK
- 
-Common Driver Methods 
-00:21:37.348 InterfaceVersion                  OK       3
-00:21:37.374 Connected                         OK       True
-00:21:37.401 Description                       OK       Meade Autostar 497 .net
-00:21:37.428 DriverInfo                        OK       Information about the driver itself. Version: 0.2
-00:21:37.457 DriverVersion                     OK       0.2
-00:21:37.485 Name                              OK       Meade Autostar 497 .net
-00:21:37.511 CommandXXX                        INFO     Tests skipped
-00:21:37.515 Action                            INFO     Conform cannot test the Action method
-00:21:37.521 SupportedActions                  OK       Driver returned an empty action list
- 
-Properties 
-00:21:37.626 Absolute                          OK       False
-00:21:37.631 IsMoving                          OK       False
-00:21:37.637 MaxStep                           OK       7000
-00:21:37.642 MaxIncrement                      OK       7000
-00:21:37.820 Position                          OK       Position must not be implemented for a relative focuser and a PropertyNotImplementedException exception was generated as expected
-00:21:37.988 StepSize                          OK       Optional member threw a PropertyNotImplementedException exception.
-00:21:37.993 TempCompAvailable                 OK       False
-00:21:37.999 TempComp Read                     OK       False
-00:21:38.167 TempComp Write                    OK       Temperature compensation is not available and a PropertyNotImplementedException exception was generated as expected
-00:21:38.504 Temperature                       OK       Optional member threw a PropertyNotImplementedException exception.
- 
-Methods 
-00:21:38.544 Halt                              OK       Focuser halted OK
-00:21:38.552 Move - TempComp False                      Moving by: 700
-00:21:39.264 Move - TempComp False                      Asynchronous move found
-00:21:39.270 Move - TempComp False             OK       Relative move OK
-00:21:39.278 Move - TempComp False             INFO     Returning to original position: 0
- 
-Conformance test complete 
- 
-No errors, warnings or issues found: your driver passes ASCOM validation!! 
- 
-Driver Hash Value: DBF36156F87DA91F130E0AABEFE80B250D62C2DB689AD8B44243AE0D9322245CF15AAE2E663962402E87B6B1A15440A6DDB46562EFB9527E3596096319C2AC85

ASCOM.MeadeAutostar497.Telescope.Validation.txt

@@ -1,268 +0,0 @@
-Conform Report Hash (V1): 671D83C15427DD14D9FA7F5A6C62D6B21372362C5173A2B95171D14D7442358DCF3950481797D63EB94E642D2563C3094C387C23D65466833FEA5E64CD045B46
-
- 
-ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:34
-ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
- 
-ConformanceCheck Driver ProgID: ASCOM.MeadeAutostar497.Telescope
- 
-Error handling 
-Error number for "Not Implemented" is: 80040400
-Error number for "Invalid Value 1" is: 80040401
-Error number for "Invalid Value 2" is: 80040405
-Error number for "Value Not Set 1" is: 80040402
-Error number for "Value Not Set 2" is: 80040403
-Error messages will not be interpreted to infer state.
- 
-18:07:45.625 Driver Access Checks              OK       
-18:07:46.272 AccessChecks                      OK       Successfully created driver using late binding
-18:07:46.685 AccessChecks                      OK       Successfully connected using late binding
-18:07:46.689 AccessChecks                      INFO     The driver is a .NET object
-18:07:46.693 AccessChecks                      INFO     The AssemblyQualifiedName is: ASCOM.MeadeAutostar497.Telescope, ASCOM.MeadeAutostar497.Telescope, Version=
-18:07:46.697 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.ITelescopeV3
-18:07:46.701 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.IFocuserV3
-18:07:47.416 AccessChecks                      INFO     Device does not expose interface ITelescopeV2
-18:07:48.387 AccessChecks                      INFO     Device exposes interface ITelescopeV3
-18:07:49.708 AccessChecks                      OK       Successfully created driver using driver access toolkit
-18:07:50.029 AccessChecks                      OK       Successfully connected using driver access toolkit
- 
-Conform is using ASCOM.DriverAccess.Telescope to get a Telescope object
-18:07:51.351 ConformanceCheck                  OK       Driver instance created successfully
-18:07:51.775 ConformanceCheck                  OK       Connected OK
- 
-Common Driver Methods 
-18:07:51.817 InterfaceVersion                  OK       3
-18:07:51.845 Connected                         OK       True
-18:07:51.874 Description                       OK       Meade Autostar 497 .net
-18:07:51.903 DriverInfo                        OK       Information about the driver itself. Version: 0.0
-18:07:51.932 DriverVersion                     OK       0.0
-18:07:51.961 Name                              OK       Meade Autostar 497 .net
-18:07:51.990 CommandString                     INFO     Conform cannot test the CommandString method
-18:07:51.996 CommandBlind                      INFO     Conform cannot test the CommandBlind method
-18:07:52.002 CommandBool                       INFO     Conform cannot test the CommandBool method
-18:07:52.008 Action                            INFO     Conform cannot test the Action method
-18:07:52.015 SupportedActions                  OK       Driver returned an empty action list
- 
-Can Properties 
-18:07:52.082 CanFindHome                       OK       False
-18:07:52.089 CanPark                           OK       True
-18:07:52.096 CanPulseGuide                     OK       True
-18:07:52.102 CanSetDeclinationRate             OK       False
-18:07:52.109 CanSetGuideRates                  OK       False
-18:07:52.117 CanSetPark                        OK       False
-18:07:52.125 CanSetPierSide                    OK       False
-18:07:52.177 CanSetRightAscensionRate          OK       False
-18:07:52.185 CanSetTracking                    OK       False
-18:07:52.193 CanSlew                           OK       True
-18:07:52.200 CanSlewltAz                       OK       True
-18:07:52.208 CanSlewAltAzAsync                 OK       True
-18:07:52.216 CanSlewAsync                      OK       True
-18:07:52.224 CanSync                           OK       True
-18:07:52.231 CanSyncAltAz                      OK       False
-18:07:52.239 CanUnPark                         OK       False
- 
-Pre-run Checks 
-18:07:52.286 Mount Safety                      INFO     Scope is not parked, continuing testing
-18:07:52.339 TimeCheck                         INFO     PC Time Zone:  GMT Summer Time, offset -1 hours.
-18:07:52.348 TimeCheck                         INFO     PC UTCDate:    08-May-2019 17:07:52.347
-18:07:53.254 TimeCheck                         INFO     Mount UTCDate: 02-May-2019 19:33:55.000
- 
-Properties 
-18:07:53.358 AlignmentMode                     OK       algPolar
-18:07:53.515 Altitude                          OK       1.00
-18:07:53.555 ApertureArea                      OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:53.591 ApertureDiameter                  OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:53.622 AtHome                            OK       False
-18:07:53.654 AtPark                            OK       False
-18:07:53.847 Azimuth                           OK       45.67
-18:07:54.028 Declination                       OK       -01:00:01.00
-18:07:54.060 DeclinationRate Read              OK       0.00
-18:07:54.093 DeclinationRate Write             OK       CanSetDeclinationRate is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.126 DoesRefraction Read               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.159 DoesRefraction Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.193 EquatorialSystem                  OK       equLocalTopocentric
-18:07:54.227 FocalLength                       OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.260 GuideRateDeclination Read         OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.270 GuideRateDeclination Write        OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.303 GuideRateRightAscension Read      OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.314 GuideRateRightAscension Write     OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.347 IsPulseGuiding                    OK       False
-18:07:54.541 RightAscension                    OK       03:59:09.00
-18:07:54.575 RightAscensionRate Read           OK       0.00
-18:07:54.609 RightAscensionRate Write          OK       CanSetRightAscensionRate is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.644 SiteElevation Read                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.678 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.691 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.703 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.861 SiteLatitude Read                 OK        00:00:00.00
-18:07:54.900 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude < -90 degrees
-18:07:54.912 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude > 90 degrees
-18:07:55.315 SiteLatitude Write                OK       Legal value  00:00:00.00 degrees written successfully
-18:07:55.455 SiteLongitude Read                OK       -42:12:00.00
-18:07:55.490 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude < -180 degrees
-18:07:55.502 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude > 180 degrees
-18:07:56.090 SiteLongitude Write               OK       Legal value -42:12:00.00 degrees written successfully
-18:07:56.246 Slewing                           OK       False
-18:07:56.280 SlewSettleTime Read               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.315 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.328 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.363 SideOfPier Read                   OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.578 SiderealTime                      OK       05:17:41.24
-18:07:56.590 SiderealTime                      INFO     Scope and ASCOM sidereal times are up to 0.5 hour different, Scope: 05:17:41.24, ASCOM: 05:24:06.50
-18:07:56.626 TargetDeclination Read            OK       .NET Not InvalidOperationException generated on read before write
-18:07:56.661 TargetDeclination Write           INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
-18:07:56.673 TargetRightAscension Read         OK       .NET Not InvalidOperationException generated on read before write
-18:07:56.708 TargetRightAscension Write        INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
-18:07:56.720 Tracking Read                     OK       True
-18:07:56.756 Tracking Write                    OK       CanSetTracking is False and a PropertyNotImplementedException exception was generated as expected
-18:07:56.797 TrackingRates                              Found drive rate: driveSidereal
-18:07:56.809 TrackingRates                     OK       Drive rates read OK
-18:07:56.822 TrackingRates                     OK       Disposed tracking rates OK
-18:07:56.858 TrackingRates                     OK       Successfully obtained a TrackingRates object after the previous TrackingRates object was disposed
-18:07:57.039 TrackingRate Read                 OK       driveLunar
-18:07:57.075 TrackingRate Write                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:57.088 TrackingRate Write                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:57.624 UTCDate Read                      OK       02-May-2019 19:33:59.000
-18:07:58.626 UTCDate Write                     OK       New UTCDate written successfully: 02/05/2019 20:33:59
- 
-Methods 
-18:07:59.997 CanMoveAxis:Primary               OK       CanMoveAxis:Primary True
-18:08:00.035 CanMoveAxis:Secondary             OK       CanMoveAxis:Secondary True
-18:08:00.072 CanMoveAxis:Tertiary              OK       CanMoveAxis:Tertiary False
-18:08:00.108 Park/Unpark                       INFO     Tests skipped
-18:08:00.131 AbortSlew                         OK       AbortSlew OK when not slewing
-18:08:00.199 AxisRate:Primary                  OK       Axis rate minimum: 1 Axis rate maximum: 1
-18:08:00.211 AxisRate:Primary                  OK       Axis rate minimum: 2 Axis rate maximum: 2
-18:08:00.225 AxisRate:Primary                  OK       Axis rate minimum: 3 Axis rate maximum: 3
-18:08:00.239 AxisRate:Primary                  OK       Axis rate minimum: 4 Axis rate maximum: 4
-18:08:00.253 AxisRate:Primary                  OK       No overlapping axis rates found
-18:08:00.266 AxisRate:Primary                  OK       No duplicate axis rates found
-18:08:00.279 AxisRate:Primary                  OK       Successfully disposed of rate 1 - 1
-18:08:00.295 AxisRate:Primary                  OK       Successfully disposed of rate 2 - 2
-18:08:00.310 AxisRate:Primary                  OK       Successfully disposed of rate 3 - 3
-18:08:00.322 AxisRate:Primary                  OK       Successfully disposed of rate 4 - 4
-18:08:00.336 AxisRate:Primary                  OK       Disposed axis rates OK
-18:08:00.350 AxisRate:Secondary                OK       Axis rate minimum: 1 Axis rate maximum: 1
-18:08:00.362 AxisRate:Secondary                OK       Axis rate minimum: 2 Axis rate maximum: 2
-18:08:00.375 AxisRate:Secondary                OK       Axis rate minimum: 3 Axis rate maximum: 3
-18:08:00.387 AxisRate:Secondary                OK       Axis rate minimum: 4 Axis rate maximum: 4
-18:08:00.400 AxisRate:Secondary                OK       No overlapping axis rates found
-18:08:00.414 AxisRate:Secondary                OK       No duplicate axis rates found
-18:08:00.445 AxisRate:Secondary                OK       Successfully disposed of rate 1 - 1
-18:08:00.458 AxisRate:Secondary                OK       Successfully disposed of rate 2 - 2
-18:08:00.472 AxisRate:Secondary                OK       Successfully disposed of rate 3 - 3
-18:08:00.487 AxisRate:Secondary                OK       Successfully disposed of rate 4 - 4
-18:08:00.501 AxisRate:Secondary                OK       Disposed axis rates OK
-18:08:00.517 AxisRate:Tertiary                 OK       Empty axis rate returned
-18:08:00.531 AxisRate:Tertiary                 OK       Disposed axis rates OK
-18:08:00.550 FindHome                          OK       CanFindHome is False and a MethodNotImplementedException exception was generated as expected
-18:08:00.606 MoveAxis Primary                  OK       Can successfully set a movement rate of zero
-18:08:00.622 MoveAxis Primary                  OK       Exception correctly generated when move axis is set below lowest rate (0.5)
-18:08:00.659 MoveAxis Primary                  OK       Exception correctly generated when move axis is set above highest rate (5)
-18:08:04.867 MoveAxis Primary                  OK       Successfully moved axis at minimum rate: 1
-18:08:09.770 MoveAxis Primary                  OK       Successfully moved axis at maximum rate: 4
-18:08:13.981 MoveAxis Primary                  OK       Tracking state correctly restored after MoveAxis when CanSetTracking is false
-18:08:13.998 MoveAxis Primary                  OK       AxisRates object successfully disposed
-18:08:14.057 MoveAxis Secondary                OK       Can successfully set a movement rate of zero
-18:08:14.072 MoveAxis Secondary                OK       Exception correctly generated when move axis is set below lowest rate (0.5)
-18:08:14.107 MoveAxis Secondary                OK       Exception correctly generated when move axis is set above highest rate (5)
-18:08:18.317 MoveAxis Secondary                OK       Successfully moved axis at minimum rate: 1
-18:08:23.262 MoveAxis Secondary                OK       Successfully moved axis at maximum rate: 4
-18:08:27.473 MoveAxis Secondary                OK       Tracking state correctly restored after MoveAxis when CanSetTracking is false
-18:08:27.492 MoveAxis Secondary                OK       AxisRates object successfully disposed
-18:08:27.551 MoveAxis Tertiary                 OK       CanMoveAxis Tertiary is False and a MethodNotImplementedException exception was generated as expected
-18:08:29.592 PulseGuide                        OK       Synchronous pulse guide found OK
-18:08:54.449 SlewToCoordinates                 INFO     Slewed within 39.2 arc seconds of expected RA: 04:18:14.61, actual RA: 04:18:12.00
-18:08:54.463 SlewToCoordinates                 INFO     Slewed within 7199.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -00:59:59.00
-18:08:54.478 SlewToCoordinates                 OK       The TargetRightAscension property 04:18:14.61 matches the expected RA OK. 
-18:08:54.492 SlewToCoordinates                 OK       The TargetDeclination property  01:00:00.00 matches the expected Declination OK. 
-18:08:54.548 SlewToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:08:55.301 SlewToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:08:55.360 SlewToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:08:56.199 SlewToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:09:20.477 SlewToCoordinatesAsync            INFO     Slewed within 19.3 arc seconds of expected RA: 03:18:41.28, actual RA: 03:18:40.00
-18:09:20.490 SlewToCoordinatesAsync            INFO     Slewed within 14398.0 arc seconds of expected DEC:  02:00:00.00, actual DEC: -01:59:58.00
-18:09:20.503 SlewToCoordinatesAsync            OK       The TargetRightAscension property 03:18:41.28 matches the expected RA OK. 
-18:09:20.516 SlewToCoordinatesAsync            OK       The TargetDeclination property  02:00:00.00 matches the expected Declination OK. 
-18:09:20.558 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:09:21.381 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:09:21.442 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:09:22.292 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:09:44.520 SyncToCoordinates                 INFO     Slewed to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:09:44.534 SyncToCoordinates                 OK       Slewed to start position OK. DEC:  00:00:00.00
-18:09:47.045 SyncToCoordinates                 INFO     Synced to sync position within 71.8 arc seconds of expected RA: 02:15:07.79, actual RA: 02:15:03.00
-18:09:47.058 SyncToCoordinates                 INFO     Synced to sync position within 3660.0 arc seconds of expected DEC: -01:00:00.00, actual DEC:  00:01:00.00
-18:09:47.071 SyncToCoordinates                 OK       The TargetRightAscension property 02:15:07.79 matches the expected RA OK. 
-18:09:47.085 SyncToCoordinates                 OK       The TargetDeclination property -01:00:00.00 matches the expected Declination OK. 
-18:10:08.444 SyncToCoordinates                 INFO     Slewed back to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:10:08.458 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:10:10.791 SyncToCoordinates                 INFO     Synced to reversed sync position within 71.8 arc seconds of expected RA: 02:23:07.79, actual RA: 02:23:03.00
-18:10:10.806 SyncToCoordinates                 INFO     Synced to reversed sync position within 7200.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -01:00:00.00
-18:10:32.484 SyncToCoordinates                 INFO     Slewed back to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:10:32.498 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:10:32.537 SyncToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:10:33.329 SyncToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:10:33.389 SyncToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:10:34.242 SyncToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:10:34.301 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension < 0 hours
-18:10:34.315 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension > 24 hours
-18:10:34.979 TargetRightAscension Write        OK       Legal value 01:20:19.62 HH:MM:SS written successfully
-18:10:35.016 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
-18:10:35.032 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
-18:10:35.652 TargetDeclination Write           OK       Legal value  01:00:00.00 DD:MM:SS written successfully
-18:10:56.417 SlewToTarget                      INFO     Slewed within 14.8 arc seconds of expected RA: 02:20:20.99, actual RA: 02:20:20.00
-18:10:56.434 SlewToTarget                      INFO     Slewed within 21596.0 arc seconds of expected DEC:  03:00:00.00, actual DEC: -02:59:56.00
-18:10:56.449 SlewToTarget                      OK       The TargetRightAscension property 02:20:20.99 matches the expected RA OK. 
-18:10:56.463 SlewToTarget                      OK       The TargetDeclination property  03:00:00.00 matches the expected Declination OK. 
-18:10:56.504 SlewToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:10:56.676 SlewToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:10:56.736 SlewToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:10:56.915 SlewToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:11:20.512 SlewToTargetAsync                 INFO     Slewed within 35.1 arc seconds of expected RA: 01:20:42.34, actual RA: 01:20:40.00
-18:11:20.526 SlewToTargetAsync                 INFO     Slewed within 28797.0 arc seconds of expected DEC:  04:00:00.00, actual DEC: -03:59:57.00
-18:11:20.539 SlewToTargetAsync                 OK       The TargetRightAscension property 01:20:42.34 matches the expected RA OK. 
-18:11:20.553 SlewToTargetAsync                 OK       The TargetDeclination property  04:00:00.00 matches the expected Declination OK. 
-18:11:20.593 SlewToTargetAsync (Bad L)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:11:20.774 SlewToTargetAsync (Bad L)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:11:20.833 SlewToTargetAsync (Bad H)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:11:21.032 SlewToTargetAsync (Bad H)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:11:21.091 DestinationSideOfPier                      Test skipped as AligmentMode is not German Polar
-18:11:22.864 SlewToAltAz                       INFO     Slewed to within 144:49:47.00 DD:MM:SS of expected Azimuth: 150:00:00.00
-18:11:22.880 SlewToAltAz                       INFO     Slewed to within 46:00:01.00 DD:MM:SS of expected Altitude: 50:00:00.00
-18:11:22.920 SlewToAltAz (Bad L)               OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
-18:11:23.710 SlewToAltAz (Bad L)               OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
-18:11:23.771 SlewToAltAz (Bad H)               OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
-18:11:24.447 SlewToAltAz (Bad H)               OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
-18:11:31.196 SlewToAltAzAsync                  INFO     Slewed to within 149:51:53.00 DD:MM:SS of expected Azimuth: 155:00:00.00
-18:11:31.210 SlewToAltAzAsync                  INFO     Slewed to within 51:00:01.00 DD:MM:SS of expected Altitude: 55:00:00.00
-18:11:31.251 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
-18:11:32.060 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
-18:11:32.121 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
-18:11:32.814 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
-18:11:56.494 SyncToTarget                      INFO     Slewed to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:11:56.509 SyncToTarget                      OK       Slewed to start position OK. DEC:  00:00:00.00
-18:11:59.005 SyncToTarget                      INFO     Synced to sync position within 55.1 arc seconds of expected RA: 02:17:18.67, actual RA: 02:17:15.00
-18:11:59.019 SyncToTarget                      INFO     Synced to sync position within 3660.0 arc seconds of expected DEC: -01:00:00.00, actual DEC:  00:01:00.00
-18:12:22.398 SyncToTarget                      INFO     Slewed back to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:12:22.416 SyncToTarget                      OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:12:24.739 SyncToTarget                      INFO     Synced to reversed sync position within 55.1 arc seconds of expected RA: 02:25:18.67, actual RA: 02:25:15.00
-18:12:24.754 SyncToTarget                      INFO     Synced to reversed sync position within 7200.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -01:00:00.00
-18:12:46.438 SyncToTarget                      INFO     Slewed back to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:12:46.452 SyncToTarget                      OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:12:46.491 SyncToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:12:46.643 SyncToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:12:46.702 SyncToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:12:46.884 SyncToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:12:47.702 SyncToAltAz                       OK       CanSyncAltAz is False and a MethodNotImplementedException exception was generated as expected
- 
-SideOfPier Model Tests 
-18:12:47.769 SideOfPier Model Tests            INFO     Tests skipped because this driver does Not support SideOfPier Read
- 
-Post-run Checks 
-18:12:47.862 Mount Safety                      INFO     Tracking can't be turned off for this mount, please switch off manually.
- 
-Conformance test complete 
- 
-No errors, warnings or issues found: your driver passes ASCOM validation!! 
- 
-Driver Hash Value: 0C55C8535B9B3A4048581454F9D6A263EFD16E20AEC783762006739F671F586B64F1D8DD3E1E613C27A5B24838AEB8656C2A19BD1EE69177ECF2619599C0DA3C

ASCOM.MeadeGeneric.Telescope.Validation.txt

@@ -0,0 +1,269 @@
+Conform Report Hash (V1): EE943505837FAD1E4F4998D567C304701AB845611D748A5A9517BF10842F951F5DD946834D8E59B5E7B84C7C067D24F52AC1C4F7E4A879A7CDAF4AB7BFEF8BB4
+
+ 
+ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:32
+ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
+ 
+ConformanceCheck Driver ProgID: ASCOM.MeadeGeneric.Telescope
+ 
+Error handling 
+Error number for "Not Implemented" is: 80040400
+Error number for "Invalid Value 1" is: 80040401
+Error number for "Invalid Value 2" is: 80040405
+Error number for "Value Not Set 1" is: 80040402
+Error number for "Value Not Set 2" is: 80040403
+Error messages will not be interpreted to infer state.
+ 
+19:18:57.428 Driver Access Checks              OK       
+19:18:58.079 AccessChecks                      OK       Successfully created driver using late binding
+19:18:58.893 AccessChecks                      OK       Successfully connected using late binding
+19:18:58.898 AccessChecks                      INFO     The driver is a .NET object
+19:18:58.903 AccessChecks                      INFO     The AssemblyQualifiedName is: ASCOM.Meade.net.Telescope, ASCOM.Meade.net.Telescope, Version=0.4.0.0, Cultu
+19:18:58.907 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.ITelescopeV3
+19:18:59.617 AccessChecks                      INFO     Device does not expose interface ITelescopeV2
+19:19:00.617 AccessChecks                      INFO     Device exposes interface ITelescopeV3
+19:19:01.929 AccessChecks                      OK       Successfully created driver using driver access toolkit
+19:19:02.635 AccessChecks                      OK       Successfully connected using driver access toolkit
+ 
+Conform is using ASCOM.DriverAccess.Telescope to get a Telescope object
+19:19:03.962 ConformanceCheck                  OK       Driver instance created successfully
+19:19:04.542 ConformanceCheck                  OK       Connected OK
+ 
+Common Driver Methods 
+19:19:04.582 InterfaceVersion                  OK       3
+19:19:04.611 Connected                         OK       True
+19:19:04.640 Description                       OK       Meade Generic
+19:19:04.668 DriverInfo                        OK       Information about the driver itself. Version: 0.4
+19:19:04.696 DriverVersion                     OK       0.4
+19:19:04.724 Name                              OK       Meade Generic
+19:19:04.753 CommandString                     INFO     Conform cannot test the CommandString method
+19:19:04.758 CommandBlind                      INFO     Conform cannot test the CommandBlind method
+19:19:04.765 CommandBool                       INFO     Conform cannot test the CommandBool method
+19:19:04.771 Action                            INFO     Conform cannot test the Action method
+19:19:04.778 SupportedActions                  OK       Driver returned an empty action list
+ 
+Can Properties 
+19:19:04.843 CanFindHome                       OK       False
+19:19:04.850 CanPark                           OK       True
+19:19:04.858 CanPulseGuide                     OK       True
+19:19:04.866 CanSetDeclinationRate             OK       False
+19:19:04.874 CanSetGuideRates                  OK       False
+19:19:04.881 CanSetPark                        OK       False
+19:19:04.889 CanSetPierSide                    OK       False
+19:19:04.923 CanSetRightAscensionRate          OK       False
+19:19:04.932 CanSetTracking                    OK       True
+19:19:04.939 CanSlew                           OK       True
+19:19:04.947 CanSlewltAz                       OK       True
+19:19:04.954 CanSlewAltAzAsync                 OK       True
+19:19:04.962 CanSlewAsync                      OK       True
+19:19:04.971 CanSync                           OK       True
+19:19:04.979 CanSyncAltAz                      OK       False
+19:19:04.990 CanUnPark                         OK       False
+ 
+Pre-run Checks 
+19:19:05.040 Mount Safety                      INFO     Scope is not parked, continuing testing
+19:19:05.070 Mount Safety                      INFO     Scope tracking has been enabled
+19:19:05.100 TimeCheck                         INFO     PC Time Zone:  GMT Summer Time, offset -1 hours.
+19:19:05.108 TimeCheck                         INFO     PC UTCDate:    19-May-2019 18:19:05.108
+19:19:05.604 TimeCheck                         INFO     Mount UTCDate: 19-May-2019 18:18:16.000
+ 
+Properties 
+19:19:05.689 AlignmentMode                     OK       algPolar
+19:19:06.820 Altitude                          OK       50.09
+19:19:06.854 ApertureArea                      OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:06.886 ApertureDiameter                  OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:06.920 AtHome                            OK       False
+19:19:06.952 AtPark                            OK       False
+19:19:07.636 Azimuth                           OK       150.49
+19:19:07.938 Declination                       OK        16:49:00.00
+19:19:07.971 DeclinationRate Read              OK       0.00
+19:19:08.003 DeclinationRate Write             OK       CanSetDeclinationRate is False and a PropertyNotImplementedException exception was generated as expected
+19:19:08.037 DoesRefraction Read               OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.071 DoesRefraction Write              OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.104 EquatorialSystem                  OK       equLocalTopocentric
+19:19:08.136 FocalLength                       OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.169 GuideRateDeclination Read         OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.179 GuideRateDeclination Write        OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
+19:19:08.212 GuideRateRightAscension Read      OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.223 GuideRateRightAscension Write     OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
+19:19:08.257 IsPulseGuiding                    OK       False
+19:19:08.539 RightAscension                    OK       11:16:48.00
+19:19:08.572 RightAscensionRate Read           OK       0.00
+19:19:08.605 RightAscensionRate Write          OK       CanSetRightAscensionRate is False and a PropertyNotImplementedException exception was generated as expected
+19:19:08.639 SiteElevation Read                OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.675 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.687 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.698 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:08.758 SiteLatitude Read                 OK        53:48:00.00
+19:19:08.793 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude < -90 degrees
+19:19:08.808 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude > 90 degrees
+19:19:08.973 SiteLatitude Write                OK       Legal value  53:48:00.00 degrees written successfully
+19:19:09.052 SiteLongitude Read                OK       -01:47:00.00
+19:19:09.088 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude < -180 degrees
+19:19:09.100 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude > 180 degrees
+19:19:09.267 SiteLongitude Write               OK       Legal value -01:47:00.00 degrees written successfully
+19:19:09.326 Slewing                           OK       False
+19:19:09.361 SlewSettleTime Read               OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:09.400 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:09.413 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:09.447 SideOfPier Read                   OK       Optional member threw a PropertyNotImplementedException exception.
+19:19:09.493 SiderealTime                      OK       10:00:32.13
+19:19:09.505 SiderealTime                      OK       Scope and ASCOM sidereal times agree to better than 2 seconds, Scope: 10:00:32.13, ASCOM: 10:00:33.22
+19:19:09.540 TargetDeclination Read            OK       .NET Not InvalidOperationException generated on read before write
+19:19:09.575 TargetDeclination Write           INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
+19:19:09.588 TargetRightAscension Read         OK       .NET Not InvalidOperationException generated on read before write
+19:19:09.623 TargetRightAscension Write        INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
+19:19:09.635 Tracking Read                     OK       True
+19:19:10.697 Tracking Write                    OK       False
+19:19:11.759 TrackingRates                              Found drive rate: driveSidereal
+19:19:11.772 TrackingRates                              Found drive rate: driveLunar
+19:19:11.784 TrackingRates                     OK       Drive rates read OK
+19:19:11.797 TrackingRates                     OK       Disposed tracking rates OK
+19:19:11.832 TrackingRates                     OK       Successfully obtained a TrackingRates object after the previous TrackingRates object was disposed
+19:19:11.858 TrackingRate Read                 OK       driveSidereal
+19:19:11.893 TrackingRate Write                OK       Successfully set drive rate: driveSidereal
+19:19:11.928 TrackingRate Write                OK       Successfully set drive rate: driveLunar
+19:19:12.073 UTCDate Read                      OK       19-May-2019 18:18:23.000
+19:19:13.628 UTCDate Write                     OK       New UTCDate written successfully: 19/05/2019 19:18:23
+ 
+Methods 
+19:19:15.180 CanMoveAxis:Primary               OK       CanMoveAxis:Primary True
+19:19:15.218 CanMoveAxis:Secondary             OK       CanMoveAxis:Secondary True
+19:19:15.255 CanMoveAxis:Tertiary              OK       CanMoveAxis:Tertiary False
+19:19:15.292 Park/Unpark                       INFO     Tests skipped
+19:19:15.311 AbortSlew                         OK       AbortSlew OK when not slewing
+19:19:15.376 AxisRate:Primary                  OK       Axis rate minimum: 1 Axis rate maximum: 1
+19:19:15.390 AxisRate:Primary                  OK       Axis rate minimum: 2 Axis rate maximum: 2
+19:19:15.404 AxisRate:Primary                  OK       Axis rate minimum: 3 Axis rate maximum: 3
+19:19:15.417 AxisRate:Primary                  OK       Axis rate minimum: 4 Axis rate maximum: 4
+19:19:15.430 AxisRate:Primary                  OK       No overlapping axis rates found
+19:19:15.442 AxisRate:Primary                  OK       No duplicate axis rates found
+19:19:15.454 AxisRate:Primary                  OK       Successfully disposed of rate 1 - 1
+19:19:15.468 AxisRate:Primary                  OK       Successfully disposed of rate 2 - 2
+19:19:15.480 AxisRate:Primary                  OK       Successfully disposed of rate 3 - 3
+19:19:15.492 AxisRate:Primary                  OK       Successfully disposed of rate 4 - 4
+19:19:15.505 AxisRate:Primary                  OK       Disposed axis rates OK
+19:19:15.518 AxisRate:Secondary                OK       Axis rate minimum: 1 Axis rate maximum: 1
+19:19:15.533 AxisRate:Secondary                OK       Axis rate minimum: 2 Axis rate maximum: 2
+19:19:15.546 AxisRate:Secondary                OK       Axis rate minimum: 3 Axis rate maximum: 3
+19:19:15.559 AxisRate:Secondary                OK       Axis rate minimum: 4 Axis rate maximum: 4
+19:19:15.571 AxisRate:Secondary                OK       No overlapping axis rates found
+19:19:15.585 AxisRate:Secondary                OK       No duplicate axis rates found
+19:19:15.599 AxisRate:Secondary                OK       Successfully disposed of rate 1 - 1
+19:19:15.612 AxisRate:Secondary                OK       Successfully disposed of rate 2 - 2
+19:19:15.625 AxisRate:Secondary                OK       Successfully disposed of rate 3 - 3
+19:19:15.638 AxisRate:Secondary                OK       Successfully disposed of rate 4 - 4
+19:19:15.652 AxisRate:Secondary                OK       Disposed axis rates OK
+19:19:15.667 AxisRate:Tertiary                 OK       Empty axis rate returned
+19:19:15.680 AxisRate:Tertiary                 OK       Disposed axis rates OK
+19:19:15.697 FindHome                          OK       CanFindHome is False and a MethodNotImplementedException exception was generated as expected
+19:19:15.745 MoveAxis Primary                  OK       Can successfully set a movement rate of zero
+19:19:15.761 MoveAxis Primary                  OK       Exception correctly generated when move axis is set below lowest rate (0.5)
+19:19:15.800 MoveAxis Primary                  OK       Exception correctly generated when move axis is set above highest rate (5)
+19:19:19.972 MoveAxis Primary                  OK       Successfully moved axis at minimum rate: 1
+19:19:24.750 MoveAxis Primary                  OK       Successfully moved axis at maximum rate: 4
+19:19:28.925 MoveAxis Primary                  OK       Tracking state correctly retained for both tracking states
+19:19:28.941 MoveAxis Primary                  OK       AxisRates object successfully disposed
+19:19:29.002 MoveAxis Secondary                OK       Can successfully set a movement rate of zero
+19:19:29.018 MoveAxis Secondary                OK       Exception correctly generated when move axis is set below lowest rate (0.5)
+19:19:29.055 MoveAxis Secondary                OK       Exception correctly generated when move axis is set above highest rate (5)
+19:19:33.266 MoveAxis Secondary                OK       Successfully moved axis at minimum rate: 1
+19:19:38.191 MoveAxis Secondary                OK       Successfully moved axis at maximum rate: 4
+19:19:42.366 MoveAxis Secondary                OK       Tracking state correctly retained for both tracking states
+19:19:42.384 MoveAxis Secondary                OK       AxisRates object successfully disposed
+19:19:42.447 MoveAxis Tertiary                 OK       CanMoveAxis Tertiary is False and a MethodNotImplementedException exception was generated as expected
+19:19:44.487 PulseGuide                        OK       Synchronous pulse guide found OK
+19:20:06.507 SlewToCoordinates                 INFO     Slewed within 175.3 arc seconds of expected RA: 09:01:07.31, actual RA: 09:01:19.00
+19:20:06.522 SlewToCoordinates                 INFO     Slewed within 82.0 arc seconds of expected DEC:  01:00:00.00, actual DEC:  01:01:22.00
+19:20:06.537 SlewToCoordinates                 OK       The TargetRightAscension property 09:01:07.31 matches the expected RA OK. 
+19:20:06.550 SlewToCoordinates                 OK       The TargetDeclination property  01:00:00.00 matches the expected Declination OK. 
+19:20:06.591 SlewToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
+19:20:06.856 SlewToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
+19:20:06.920 SlewToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
+19:20:07.224 SlewToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
+19:20:25.860 SlewToCoordinatesAsync            INFO     Slewed within 178.3 arc seconds of expected RA: 08:01:30.11, actual RA: 08:01:42.00
+19:20:25.876 SlewToCoordinatesAsync            INFO     Slewed within 64.0 arc seconds of expected DEC:  02:00:00.00, actual DEC:  01:58:56.00
+19:20:25.890 SlewToCoordinatesAsync            OK       The TargetRightAscension property 08:01:30.11 matches the expected RA OK. 
+19:20:25.904 SlewToCoordinatesAsync            OK       The TargetDeclination property  02:00:00.00 matches the expected Declination OK. 
+19:20:25.945 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad RA coordinate: -01:00:00.00
+19:20:26.201 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad Dec coordinate: -100:00:00.00
+19:20:26.263 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad RA coordinate: 25:00:00.00
+19:20:26.567 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad Dec coordinate: 100:00:00.00
+19:20:47.987 SyncToCoordinates                 INFO     Slewed to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
+19:20:48.003 SyncToCoordinates                 OK       Slewed to start position OK. DEC:  26:54:00.00
+19:20:49.265 SyncToCoordinates                 INFO     Synced to sync position within 25.3 arc seconds of expected RA: 06:57:49.69, actual RA: 06:57:48.00
+19:20:49.282 SyncToCoordinates                 OK       Synced to sync position OK. DEC:  25:54:00.00
+19:20:49.301 SyncToCoordinates                 OK       The TargetRightAscension property 06:57:49.69 matches the expected RA OK. 
+19:20:49.316 SyncToCoordinates                 OK       The TargetDeclination property  25:54:00.00 matches the expected Declination OK. 
+19:21:05.202 SyncToCoordinates                 INFO     Slewed back to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
+19:21:05.217 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  26:54:00.00
+19:21:06.337 SyncToCoordinates                 INFO     Synced to reversed sync position within 40.3 arc seconds of expected RA: 07:05:49.69, actual RA: 07:05:47.00
+19:21:06.353 SyncToCoordinates                 OK       Synced to reversed sync position OK. DEC:  27:54:00.00
+19:21:22.444 SyncToCoordinates                 INFO     Slewed back to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
+19:21:22.459 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  26:54:00.00
+19:21:22.502 SyncToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
+19:21:22.620 SyncToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
+19:21:22.682 SyncToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
+19:21:23.379 SyncToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
+19:21:23.439 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension < 0 hours
+19:21:23.454 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension > 24 hours
+19:21:23.670 TargetRightAscension Write        OK       Legal value 06:02:46.50 HH:MM:SS written successfully
+19:21:23.709 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
+19:21:23.724 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
+19:21:23.918 TargetDeclination Write           OK       Legal value  01:00:00.00 DD:MM:SS written successfully
+19:21:44.377 SlewToTarget                      INFO     Slewed within 44.9 arc seconds of expected RA: 07:02:46.99, actual RA: 07:02:44.00
+19:21:44.392 SlewToTarget                      OK       Slewed OK. DEC:  03:00:00.00
+19:21:44.421 SlewToTarget                      OK       The TargetRightAscension property 07:02:46.99 matches the expected RA OK. 
+19:21:44.435 SlewToTarget                      OK       The TargetDeclination property  03:00:00.00 matches the expected Declination OK. 
+19:21:44.476 SlewToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
+19:21:44.565 SlewToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
+19:21:44.627 SlewToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
+19:21:44.713 SlewToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
+19:22:05.987 SlewToTargetAsync                 INFO     Slewed within 58.0 arc seconds of expected RA: 06:03:07.87, actual RA: 06:03:04.00
+19:22:06.002 SlewToTargetAsync                 OK       Slewed OK. DEC:  04:00:00.00
+19:22:06.016 SlewToTargetAsync                 OK       The TargetRightAscension property 06:03:07.87 matches the expected RA OK. 
+19:22:06.030 SlewToTargetAsync                 OK       The TargetDeclination property  04:00:00.00 matches the expected Declination OK. 
+19:22:06.071 SlewToTargetAsync (Bad L)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
+19:22:06.134 SlewToTargetAsync (Bad L)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
+19:22:06.200 SlewToTargetAsync (Bad H)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
+19:22:06.281 SlewToTargetAsync (Bad H)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
+19:22:06.341 DestinationSideOfPier                      Test skipped as AligmentMode is not German Polar
+19:22:36.522 SlewToAltAz                       INFO     Slewed to within  00:11:23.03 DD:MM:SS of expected Azimuth: 150:00:00.00
+19:22:36.539 SlewToAltAz                       INFO     Slewed to within 00:02:05.06 DD:MM:SS of expected Altitude: 50:00:00.00
+19:22:36.581 SlewToAltAz (Bad L)               OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
+19:22:36.599 SlewToAltAz (Bad L)               OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
+19:22:36.662 SlewToAltAz (Bad H)               OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
+19:22:36.681 SlewToAltAz (Bad H)               OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
+19:22:57.713 SlewToAltAzAsync                  INFO     Slewed to within  00:09:16.99 DD:MM:SS of expected Azimuth: 155:00:00.00
+19:22:57.728 SlewToAltAzAsync                  INFO     Slewed to within 00:00:28.11 DD:MM:SS of expected Altitude: 55:00:00.00
+19:22:57.770 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
+19:22:57.789 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
+19:22:57.851 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
+19:22:57.870 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
+19:23:22.572 SyncToTarget                      OK       Slewed to start position OK. RA:   07:04:21.38
+19:23:22.588 SyncToTarget                      OK       Slewed to start position OK. DEC:  26:54:00.00
+19:23:24.332 SyncToTarget                      INFO     Synced to sync position within 20.7 arc seconds of expected RA: 07:00:21.38, actual RA: 07:00:20.00
+19:23:24.347 SyncToTarget                      OK       Synced to sync position OK. DEC:  25:54:00.00
+19:23:42.234 SyncToTarget                      INFO     Slewed back to start position within 20.7 arc seconds of expected RA: 07:04:21.38, actual RA: 07:04:20.00
+19:23:42.250 SyncToTarget                      OK       Slewed back to start position OK. DEC:  26:54:00.00
+19:23:43.530 SyncToTarget                      INFO     Synced to reversed sync position within 35.7 arc seconds of expected RA: 07:08:21.38, actual RA: 07:08:19.00
+19:23:43.546 SyncToTarget                      OK       Synced to reversed sync position OK. DEC:  27:54:00.00
+19:23:59.445 SyncToTarget                      INFO     Slewed back to start position within 20.7 arc seconds of expected RA: 07:04:21.38, actual RA: 07:04:20.00
+19:23:59.460 SyncToTarget                      OK       Slewed back to start position OK. DEC:  26:54:00.00
+19:23:59.500 SyncToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
+19:23:59.656 SyncToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
+19:23:59.716 SyncToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
+19:23:59.997 SyncToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
+19:24:02.242 SyncToAltAz                       OK       CanSyncAltAz is False and a MethodNotImplementedException exception was generated as expected
+ 
+SideOfPier Model Tests 
+19:24:02.320 SideOfPier Model Tests            INFO     Tests skipped because this driver does Not support SideOfPier Read
+ 
+Post-run Checks 
+19:24:02.417 Mount Safety                      OK       Tracking stopped to protect your mount.
+ 
+Conformance test complete 
+ 
+No errors, warnings or issues found: your driver passes ASCOM validation!! 
+ 
+Driver Hash Value: D41F95CA4DB76F4C2F9742455087821EB82915774F9D97EDF4DAB66B4D74932295DC665B8B90C3FC94AB1B5FA5BAC8009D715FF21C0620CB5F40D8DACFAE67D6

ASCOM.MeadeGeneric.focuser.Validation.txt

@@ -0,0 +1,68 @@
+Conform Report Hash (V1): B869A2DCAA7DACEB47895197B4418080943EDDCC3D1A49E9DDE97B9B22DF8F7B83DC95D595972C4345F53236103CE33045056F1A6BB068B32F72C080377A2FC1
+
+ 
+ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:32
+ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
+ 
+ConformanceCheck Driver ProgID: ASCOM.MeadeGeneric.focuser
+ 
+Error handling 
+Error number for "Not Implemented" is: 80040400
+Error number for "Invalid Value 1" is: 80040404
+Error number for "Invalid Value 3" is: 80040405
+Error number for "Value Not Set 1" is: 80040402
+Error number for "Value Not Set 2" is: 80040403
+Error messages will not be interpreted to infer state.
+ 
+19:18:30.690 Driver Access Checks              OK       
+19:18:31.351 AccessChecks                      OK       Successfully created driver using late binding
+19:18:31.676 AccessChecks                      OK       Successfully connected using late binding
+19:18:31.682 AccessChecks                      INFO     The driver is a .NET object
+19:18:31.687 AccessChecks                      INFO     The AssemblyQualifiedName is: ASCOM.Meade.net.Focuser, ASCOM.Meade.net.Focuser, Version=0.4.0.0, Culture=n
+19:18:31.692 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.IFocuserV3
+19:18:32.341 AccessChecks                      INFO     Device does not expose IFocuser interface
+19:18:32.405 AccessChecks                      INFO     Device does not expose IFocuserV2 interface
+19:18:32.675 AccessChecks                      INFO     Device exposes IFocuserV3 interface
+19:18:32.793 AccessChecks                      OK       Successfully created driver using driver access toolkit
+19:18:32.967 AccessChecks                      OK       Successfully connected using driver access toolkit
+19:18:33.031 AccessChecks                      OK       Successfully disconnected using driver access toolkit
+ 
+Conform is using ASCOM.DriverAccess.Focuser to get a Focuser object
+19:18:33.103 ConformanceCheck                  OK       Driver instance created successfully
+19:18:33.621 ConformanceCheck                  OK       Connected OK
+ 
+Common Driver Methods 
+19:18:33.661 InterfaceVersion                  OK       3
+19:18:33.691 Connected                         OK       True
+19:18:33.719 Description                       OK       Meade Generic
+19:18:33.749 DriverInfo                        OK       Information about the driver itself. Version: 0.4
+19:18:33.778 DriverVersion                     OK       0.4
+19:18:33.807 Name                              OK       Meade Generic
+19:18:33.836 CommandXXX                        INFO     Tests skipped
+19:18:33.842 Action                            INFO     Conform cannot test the Action method
+19:18:33.850 SupportedActions                  OK       Driver returned an empty action list
+ 
+Properties 
+19:18:33.962 Absolute                          OK       False
+19:18:33.970 IsMoving                          OK       False
+19:18:33.977 MaxStep                           OK       7000
+19:18:33.985 MaxIncrement                      OK       7000
+19:18:33.994 Position                          OK       Position must not be implemented for a relative focuser and a PropertyNotImplementedException exception was generated as expected
+19:18:34.003 StepSize                          OK       Optional member threw a PropertyNotImplementedException exception.
+19:18:34.011 TempCompAvailable                 OK       False
+19:18:34.019 TempComp Read                     OK       False
+19:18:34.027 TempComp Write                    OK       Temperature compensation is not available and a PropertyNotImplementedException exception was generated as expected
+19:18:34.036 Temperature                       OK       Optional member threw a PropertyNotImplementedException exception.
+ 
+Methods 
+19:18:34.085 Halt                              OK       Focuser halted OK
+19:18:34.096 Move - TempComp False                      Moving by: 700
+19:18:34.808 Move - TempComp False                      Asynchronous move found
+19:18:34.818 Move - TempComp False             OK       Relative move OK
+19:18:34.830 Move - TempComp False             INFO     Returning to original position: 0
+ 
+Conformance test complete 
+ 
+No errors, warnings or issues found: your driver passes ASCOM validation!! 
+ 
+Driver Hash Value: 1816E24C06CF16B84021B2B07D4629C3E46DCC5E738D9BACBD524BE5A969BCB07AB3704AB754BC5AA54F5A76F77721D6F7D756AC16DC0AC7DACDC9EA900FA3C8

AstroMath.UnitTests/AstroMath.UnitTests.csproj

@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="..\packages\NUnit.3.12.0\build\NUnit.props" Condition="Exists('..\packages\NUnit.3.12.0\build\NUnit.props')" />
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>AstroMath.UnitTests</RootNamespace>
+    <AssemblyName>AstroMath.UnitTests</AssemblyName>
+    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <Deterministic>true</Deterministic>
+    <NuGetPackageImportStamp>
+    </NuGetPackageImportStamp>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <PlatformTarget>x86</PlatformTarget>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>bin\x86\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <OutputPath>bin\x86\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <Optimize>true</Optimize>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="Castle.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc, processorArchitecture=MSIL">
+      <HintPath>..\packages\Castle.Core.4.4.0\lib\net45\Castle.Core.dll</HintPath>
+    </Reference>
+    <Reference Include="Moq, Version=4.12.0.0, Culture=neutral, PublicKeyToken=69f491c39445e920, processorArchitecture=MSIL">
+      <HintPath>..\packages\Moq.4.12.0\lib\net45\Moq.dll</HintPath>
+    </Reference>
+    <Reference Include="nunit.framework, Version=3.12.0.0, Culture=neutral, PublicKeyToken=2638cd05610744eb, processorArchitecture=MSIL">
+      <HintPath>..\packages\NUnit.3.12.0\lib\net45\nunit.framework.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=4.0.4.1, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.4.5.2\lib\netstandard2.0\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
+    </Reference>
+    <Reference Include="System.Threading.Tasks.Extensions, Version=4.2.0.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.2\lib\netstandard2.0\System.Threading.Tasks.Extensions.dll</HintPath>
+    </Reference>
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AstroMathsUnitTests.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Meade.net.Telescope\Meade.net.Telescope.csproj">
+      <Project>{64308775-bd4a-469c-bcab-3ed830b811af}</Project>
+      <Name>Meade.net.Telescope</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="packages.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <Target Name="EnsureNuGetPackageBuildImports" BeforeTargets="PrepareForBuild">
+    <PropertyGroup>
+      <ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them.  For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
+    </PropertyGroup>
+    <Error Condition="!Exists('..\packages\NUnit.3.12.0\build\NUnit.props')" Text="$([System.String]::Format('$(ErrorText)', '..\packages\NUnit.3.12.0\build\NUnit.props'))" />
+  </Target>
+</Project>

AstroMath.UnitTests/AstroMathsUnitTests.cs

@@ -0,0 +1,172 @@
+using System;
+using ASCOM.Meade.net.AstroMaths;
+using NUnit.Framework;
+
+namespace AstroMath.UnitTests
+{
+    [TestFixture]
+    public class AstroMathsUnitTests
+    {
+        private AstroMaths _astroMath;
+
+        [SetUp]
+        public void Setup()
+        {
+            _astroMath = new AstroMaths();
+        }
+
+        [Test]
+        public void DegreesToRadians()
+        {
+            var radians = _astroMath.DegreesToRadians(90);
+            Assert.That(radians, Is.EqualTo(1.5707963267948966));
+        }
+
+        [Test]
+        public void RadiansToDegrees()
+        {
+            var degrees = _astroMath.RadiansToDegrees(1.5707963267948966);
+            Assert.That(degrees, Is.EqualTo(90));
+        }
+
+
+        [Test]
+        public void DateTimeToDecimalHours_book()
+        {
+            DateTime dateTime = new DateTime(2019, 05, 18, 18, 31, 27, DateTimeKind.Utc);
+            var decimalHours = _astroMath.DateTimeToDecimalHours(dateTime);
+
+            Assert.That(decimalHours, Is.EqualTo(18.524166666666666));
+        }
+
+        [Test]
+        public void DateTimeToDecimalHours()
+        {
+            DateTime dateTime = new DateTime(2019, 05, 18, 22, 26, 15, DateTimeKind.Utc);
+            var decimalHours = _astroMath.DateTimeToDecimalHours(dateTime);
+
+            Assert.That(decimalHours, Is.EqualTo(22.4375));
+        }
+
+        [Test]
+        public void UTtoGST_book()
+        {
+            DateTime dateTime = new DateTime(1980, 04, 22, 14, 36, 51, 670, DateTimeKind.Utc);
+            double gst = _astroMath.UTtoGst(dateTime);
+
+            Assert.That(gst, Is.EqualTo(4.667932706211154));
+        }
+
+        [Test]
+        public void UTtoGst()
+        {
+            DateTime dateTime = new DateTime(2019, 05, 18, 22, 26, 15, DateTimeKind.Utc);
+            double gst = _astroMath.UTtoGst(dateTime);
+
+            Assert.That(gst, Is.EqualTo(14.191879687876451));
+        }
+
+        [Test]
+        public void GSTtoLST_book()
+        {
+            double gst = 4.668119;
+            var longitude = -64;
+            var lst = _astroMath.GsTtoLst(gst, longitude);
+            Assert.That(lst, Is.EqualTo(0.4014523333333333));
+        }
+
+        [Test]
+        public void GsTtoLst()
+        {
+            double gst = 14.257589512545053;
+            var longitude = -1.7833333333333332;
+            var lst = _astroMath.GsTtoLst(gst, longitude);
+            Assert.That(lst, Is.EqualTo(14.138700623656163));
+        }
+
+        [Test]
+        public void RightAscensionToHourAngle_book()
+        {
+            DateTime dateTime = new DateTime(1980, 04, 22, 18, 36, 51,670, DateTimeKind.Utc);
+            var longitude = -64;
+            var rightAscension = 18.539166666666667;//18:32'21"
+
+            //var declination = 30.0019444444444
+            var hourAngle = _astroMath.RightAscensionToHourAngle(dateTime, longitude, rightAscension);
+            Assert.That(hourAngle, Is.EqualTo(9.8730510088778161));
+        }
+
+        [Test]
+        public void RightAscensionToHourAngle()
+        {
+            DateTime dateTime = new DateTime(2019, 05, 18, 22, 26, 15, DateTimeKind.Utc);
+            var longitude = -1.7833333333333332;
+            var rightAscension = 4.15361111111111;
+
+            var hourAngle = _astroMath.RightAscensionToHourAngle(dateTime, longitude, rightAscension);
+            Assert.That(hourAngle, Is.EqualTo(9.9193796878764502));
+        }
+
+
+        [Test]
+        public void ConvertEqToHoz_book()
+        {
+            var latitude = 52.0;
+
+            EquatorialCoordinates equatorialCoordinates = new EquatorialCoordinates();
+            equatorialCoordinates.RightAscension = 5.862222222222222;//5 51' 44"
+            equatorialCoordinates.Declination = 23.21944444444444;//23 13' 10"
+
+            var hourAngle = 5.682222;
+
+            var altAz = _astroMath.ConvertEqToHoz(hourAngle, latitude, equatorialCoordinates);
+
+            Assert.That(altAz.Altitude, Is.EqualTo(20.958562421092779));
+            Assert.That(altAz.Azimuth, Is.EqualTo(281.2728706962269));
+        }
+
+        [Test]
+        public void ConvertEqToHoz()
+        {
+            DateTime dateTime = new DateTime(2019, 05, 18, 22, 26, 15, DateTimeKind.Utc);
+            var longitude = -1.7833333333333332;
+            var latitude = 52.0;
+            EquatorialCoordinates equatorialCoordinates = new EquatorialCoordinates();
+            equatorialCoordinates.RightAscension = 4.15361111111111;
+            equatorialCoordinates.Declination = 30.0019444444444;
+
+            var hourAngle = _astroMath.RightAscensionToHourAngle(dateTime, longitude, equatorialCoordinates.RightAscension);
+            var altaz = _astroMath.ConvertEqToHoz(hourAngle, latitude, equatorialCoordinates);
+
+            Assert.That(altaz.Altitude, Is.EqualTo(-3.5534402923925872));
+            Assert.That(altaz.Azimuth, Is.EqualTo(333.2819484462679));
+        }
+
+        //[Test]
+        //public void ConvertHozToEq_book()
+        //{
+        //    HorizonCoordinates hc = new HorizonCoordinates();
+        //    hc.Altitude = 19.33434444;
+        //    hc.Azimuth = 283.271028;
+        //    var lat = 52;
+        //    var raDec = _astroMath.ConvertHozToEq(lat, hc);
+
+        //    Assert.That(raDec.RightAscension, Is.EqualTo(5.8622222973512992));
+        //    Assert.That(raDec.Declination, Is.EqualTo(23.219444300552407));
+        //}
+
+
+        //[Test]
+        //public void ConvertHozToEq()
+        //{
+        //    HorizonCoordinates hc = new HorizonCoordinates();
+        //    hc.Altitude = 50;
+        //    hc.Azimuth = 150;
+        //    var lat = 53.5;
+        //    var raDec = _astroMath.ConvertHozToEq(lat, hc);
+
+        //    Assert.That(raDec.RightAscension, Is.EqualTo(22.69408899548845));
+        //    Assert.That(raDec.Declination, Is.EqualTo(16.539114529888948));
+        //}
+    }
+}

AstroMath.UnitTests/Properties/AssemblyInfo.cs

@@ -0,0 +1,35 @@
+using System.Reflection;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("AstroMath.UnitTests")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("AstroMath.UnitTests")]
+[assembly: AssemblyCopyright("Copyright ©  2019")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("ad4959dd-33d7-4c3f-8db0-7361d8e74a95")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]

AstroMath.UnitTests/packages.config

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="Castle.Core" version="4.4.0" targetFramework="net472" />
+  <package id="Moq" version="4.12.0" targetFramework="net472" />
+  <package id="NUnit" version="3.12.0" targetFramework="net472" />
+  <package id="System.Runtime.CompilerServices.Unsafe" version="4.5.2" targetFramework="net472" />
+  <package id="System.Threading.Tasks.Extensions" version="4.5.2" targetFramework="net472" />
+</packages>

ConformanceResult.txt

@@ -1,272 +0,0 @@
-Start-up ASCOM Device Conformance Checker - 64bit mode
-Start-up ASCOM Platform 6.4 SP1 6.4.1.2695
- 
- 
-ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:34
-ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
- 
-ConformanceCheck Driver ProgID: ASCOM.MeadeAutostar497.Telescope
- 
-Error handling 
-Error number for "Not Implemented" is: 80040400
-Error number for "Invalid Value 1" is: 80040401
-Error number for "Invalid Value 2" is: 80040405
-Error number for "Value Not Set 1" is: 80040402
-Error number for "Value Not Set 2" is: 80040403
-Error messages will not be interpreted to infer state.
- 
-18:07:45.625 Driver Access Checks              OK       
-18:07:46.272 AccessChecks                      OK       Successfully created driver using late binding
-18:07:46.685 AccessChecks                      OK       Successfully connected using late binding
-18:07:46.689 AccessChecks                      INFO     The driver is a .NET object
-18:07:46.693 AccessChecks                      INFO     The AssemblyQualifiedName is: ASCOM.MeadeAutostar497.Telescope, ASCOM.MeadeAutostar497.Telescope, Version=
-18:07:46.697 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.ITelescopeV3
-18:07:46.701 AccessChecks                      INFO     The driver implements interface: ASCOM.DeviceInterface.IFocuserV3
-18:07:47.416 AccessChecks                      INFO     Device does not expose interface ITelescopeV2
-18:07:48.387 AccessChecks                      INFO     Device exposes interface ITelescopeV3
-18:07:49.708 AccessChecks                      OK       Successfully created driver using driver access toolkit
-18:07:50.029 AccessChecks                      OK       Successfully connected using driver access toolkit
- 
-Conform is using ASCOM.DriverAccess.Telescope to get a Telescope object
-18:07:51.351 ConformanceCheck                  OK       Driver instance created successfully
-18:07:51.775 ConformanceCheck                  OK       Connected OK
- 
-Common Driver Methods 
-18:07:51.817 InterfaceVersion                  OK       3
-18:07:51.845 Connected                         OK       True
-18:07:51.874 Description                       OK       Meade Autostar 497 .net
-18:07:51.903 DriverInfo                        OK       Information about the driver itself. Version: 0.0
-18:07:51.932 DriverVersion                     OK       0.0
-18:07:51.961 Name                              OK       Meade Autostar 497 .net
-18:07:51.990 CommandString                     INFO     Conform cannot test the CommandString method
-18:07:51.996 CommandBlind                      INFO     Conform cannot test the CommandBlind method
-18:07:52.002 CommandBool                       INFO     Conform cannot test the CommandBool method
-18:07:52.008 Action                            INFO     Conform cannot test the Action method
-18:07:52.015 SupportedActions                  OK       Driver returned an empty action list
- 
-Can Properties 
-18:07:52.082 CanFindHome                       OK       False
-18:07:52.089 CanPark                           OK       True
-18:07:52.096 CanPulseGuide                     OK       True
-18:07:52.102 CanSetDeclinationRate             OK       False
-18:07:52.109 CanSetGuideRates                  OK       False
-18:07:52.117 CanSetPark                        OK       False
-18:07:52.125 CanSetPierSide                    OK       False
-18:07:52.177 CanSetRightAscensionRate          OK       False
-18:07:52.185 CanSetTracking                    OK       False
-18:07:52.193 CanSlew                           OK       True
-18:07:52.200 CanSlewltAz                       OK       True
-18:07:52.208 CanSlewAltAzAsync                 OK       True
-18:07:52.216 CanSlewAsync                      OK       True
-18:07:52.224 CanSync                           OK       True
-18:07:52.231 CanSyncAltAz                      OK       False
-18:07:52.239 CanUnPark                         OK       False
- 
-Pre-run Checks 
-18:07:52.286 Mount Safety                      INFO     Scope is not parked, continuing testing
-18:07:52.339 TimeCheck                         INFO     PC Time Zone:  GMT Summer Time, offset -1 hours.
-18:07:52.348 TimeCheck                         INFO     PC UTCDate:    08-May-2019 17:07:52.347
-18:07:53.254 TimeCheck                         INFO     Mount UTCDate: 02-May-2019 19:33:55.000
- 
-Properties 
-18:07:53.358 AlignmentMode                     OK       algPolar
-18:07:53.515 Altitude                          OK       1.00
-18:07:53.555 ApertureArea                      OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:53.591 ApertureDiameter                  OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:53.622 AtHome                            OK       False
-18:07:53.654 AtPark                            OK       False
-18:07:53.847 Azimuth                           OK       45.67
-18:07:54.028 Declination                       OK       -01:00:01.00
-18:07:54.060 DeclinationRate Read              OK       0.00
-18:07:54.093 DeclinationRate Write             OK       CanSetDeclinationRate is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.126 DoesRefraction Read               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.159 DoesRefraction Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.193 EquatorialSystem                  OK       equLocalTopocentric
-18:07:54.227 FocalLength                       OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.260 GuideRateDeclination Read         OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.270 GuideRateDeclination Write        OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.303 GuideRateRightAscension Read      OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.314 GuideRateRightAscension Write     OK       CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.347 IsPulseGuiding                    OK       False
-18:07:54.541 RightAscension                    OK       03:59:09.00
-18:07:54.575 RightAscensionRate Read           OK       0.00
-18:07:54.609 RightAscensionRate Write          OK       CanSetRightAscensionRate is False and a PropertyNotImplementedException exception was generated as expected
-18:07:54.644 SiteElevation Read                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.678 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.691 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.703 SiteElevation Write               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:54.861 SiteLatitude Read                 OK        00:00:00.00
-18:07:54.900 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude < -90 degrees
-18:07:54.912 SiteLatitude Write                OK       Invalid Value exception generated as expected on set site latitude > 90 degrees
-18:07:55.315 SiteLatitude Write                OK       Legal value  00:00:00.00 degrees written successfully
-18:07:55.455 SiteLongitude Read                OK       -42:12:00.00
-18:07:55.490 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude < -180 degrees
-18:07:55.502 SiteLongitude Write               OK       Invalid Value exception generated as expected on set site longitude > 180 degrees
-18:07:56.090 SiteLongitude Write               OK       Legal value -42:12:00.00 degrees written successfully
-18:07:56.246 Slewing                           OK       False
-18:07:56.280 SlewSettleTime Read               OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.315 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.328 SlewSettleTime Write              OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.363 SideOfPier Read                   OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:56.578 SiderealTime                      OK       05:17:41.24
-18:07:56.590 SiderealTime                      INFO     Scope and ASCOM sidereal times are up to 0.5 hour different, Scope: 05:17:41.24, ASCOM: 05:24:06.50
-18:07:56.626 TargetDeclination Read            OK       .NET Not InvalidOperationException generated on read before write
-18:07:56.661 TargetDeclination Write           INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
-18:07:56.673 TargetRightAscension Read         OK       .NET Not InvalidOperationException generated on read before write
-18:07:56.708 TargetRightAscension Write        INFO     Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
-18:07:56.720 Tracking Read                     OK       True
-18:07:56.756 Tracking Write                    OK       CanSetTracking is False and a PropertyNotImplementedException exception was generated as expected
-18:07:56.797 TrackingRates                              Found drive rate: driveSidereal
-18:07:56.809 TrackingRates                     OK       Drive rates read OK
-18:07:56.822 TrackingRates                     OK       Disposed tracking rates OK
-18:07:56.858 TrackingRates                     OK       Successfully obtained a TrackingRates object after the previous TrackingRates object was disposed
-18:07:57.039 TrackingRate Read                 OK       driveLunar
-18:07:57.075 TrackingRate Write                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:57.088 TrackingRate Write                OK       Optional member threw a PropertyNotImplementedException exception.
-18:07:57.624 UTCDate Read                      OK       02-May-2019 19:33:59.000
-18:07:58.626 UTCDate Write                     OK       New UTCDate written successfully: 02/05/2019 20:33:59
- 
-Methods 
-18:07:59.997 CanMoveAxis:Primary               OK       CanMoveAxis:Primary True
-18:08:00.035 CanMoveAxis:Secondary             OK       CanMoveAxis:Secondary True
-18:08:00.072 CanMoveAxis:Tertiary              OK       CanMoveAxis:Tertiary False
-18:08:00.108 Park/Unpark                       INFO     Tests skipped
-18:08:00.131 AbortSlew                         OK       AbortSlew OK when not slewing
-18:08:00.199 AxisRate:Primary                  OK       Axis rate minimum: 1 Axis rate maximum: 1
-18:08:00.211 AxisRate:Primary                  OK       Axis rate minimum: 2 Axis rate maximum: 2
-18:08:00.225 AxisRate:Primary                  OK       Axis rate minimum: 3 Axis rate maximum: 3
-18:08:00.239 AxisRate:Primary                  OK       Axis rate minimum: 4 Axis rate maximum: 4
-18:08:00.253 AxisRate:Primary                  OK       No overlapping axis rates found
-18:08:00.266 AxisRate:Primary                  OK       No duplicate axis rates found
-18:08:00.279 AxisRate:Primary                  OK       Successfully disposed of rate 1 - 1
-18:08:00.295 AxisRate:Primary                  OK       Successfully disposed of rate 2 - 2
-18:08:00.310 AxisRate:Primary                  OK       Successfully disposed of rate 3 - 3
-18:08:00.322 AxisRate:Primary                  OK       Successfully disposed of rate 4 - 4
-18:08:00.336 AxisRate:Primary                  OK       Disposed axis rates OK
-18:08:00.350 AxisRate:Secondary                OK       Axis rate minimum: 1 Axis rate maximum: 1
-18:08:00.362 AxisRate:Secondary                OK       Axis rate minimum: 2 Axis rate maximum: 2
-18:08:00.375 AxisRate:Secondary                OK       Axis rate minimum: 3 Axis rate maximum: 3
-18:08:00.387 AxisRate:Secondary                OK       Axis rate minimum: 4 Axis rate maximum: 4
-18:08:00.400 AxisRate:Secondary                OK       No overlapping axis rates found
-18:08:00.414 AxisRate:Secondary                OK       No duplicate axis rates found
-18:08:00.445 AxisRate:Secondary                OK       Successfully disposed of rate 1 - 1
-18:08:00.458 AxisRate:Secondary                OK       Successfully disposed of rate 2 - 2
-18:08:00.472 AxisRate:Secondary                OK       Successfully disposed of rate 3 - 3
-18:08:00.487 AxisRate:Secondary                OK       Successfully disposed of rate 4 - 4
-18:08:00.501 AxisRate:Secondary                OK       Disposed axis rates OK
-18:08:00.517 AxisRate:Tertiary                 OK       Empty axis rate returned
-18:08:00.531 AxisRate:Tertiary                 OK       Disposed axis rates OK
-18:08:00.550 FindHome                          OK       CanFindHome is False and a MethodNotImplementedException exception was generated as expected
-18:08:00.606 MoveAxis Primary                  OK       Can successfully set a movement rate of zero
-18:08:00.622 MoveAxis Primary                  OK       Exception correctly generated when move axis is set below lowest rate (0.5)
-18:08:00.659 MoveAxis Primary                  OK       Exception correctly generated when move axis is set above highest rate (5)
-18:08:04.867 MoveAxis Primary                  OK       Successfully moved axis at minimum rate: 1
-18:08:09.770 MoveAxis Primary                  OK       Successfully moved axis at maximum rate: 4
-18:08:13.981 MoveAxis Primary                  OK       Tracking state correctly restored after MoveAxis when CanSetTracking is false
-18:08:13.998 MoveAxis Primary                  OK       AxisRates object successfully disposed
-18:08:14.057 MoveAxis Secondary                OK       Can successfully set a movement rate of zero
-18:08:14.072 MoveAxis Secondary                OK       Exception correctly generated when move axis is set below lowest rate (0.5)
-18:08:14.107 MoveAxis Secondary                OK       Exception correctly generated when move axis is set above highest rate (5)
-18:08:18.317 MoveAxis Secondary                OK       Successfully moved axis at minimum rate: 1
-18:08:23.262 MoveAxis Secondary                OK       Successfully moved axis at maximum rate: 4
-18:08:27.473 MoveAxis Secondary                OK       Tracking state correctly restored after MoveAxis when CanSetTracking is false
-18:08:27.492 MoveAxis Secondary                OK       AxisRates object successfully disposed
-18:08:27.551 MoveAxis Tertiary                 OK       CanMoveAxis Tertiary is False and a MethodNotImplementedException exception was generated as expected
-18:08:29.592 PulseGuide                        OK       Synchronous pulse guide found OK
-18:08:54.449 SlewToCoordinates                 INFO     Slewed within 39.2 arc seconds of expected RA: 04:18:14.61, actual RA: 04:18:12.00
-18:08:54.463 SlewToCoordinates                 INFO     Slewed within 7199.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -00:59:59.00
-18:08:54.478 SlewToCoordinates                 OK       The TargetRightAscension property 04:18:14.61 matches the expected RA OK. 
-18:08:54.492 SlewToCoordinates                 OK       The TargetDeclination property  01:00:00.00 matches the expected Declination OK. 
-18:08:54.548 SlewToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:08:55.301 SlewToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:08:55.360 SlewToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:08:56.199 SlewToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:09:20.477 SlewToCoordinatesAsync            INFO     Slewed within 19.3 arc seconds of expected RA: 03:18:41.28, actual RA: 03:18:40.00
-18:09:20.490 SlewToCoordinatesAsync            INFO     Slewed within 14398.0 arc seconds of expected DEC:  02:00:00.00, actual DEC: -01:59:58.00
-18:09:20.503 SlewToCoordinatesAsync            OK       The TargetRightAscension property 03:18:41.28 matches the expected RA OK. 
-18:09:20.516 SlewToCoordinatesAsync            OK       The TargetDeclination property  02:00:00.00 matches the expected Declination OK. 
-18:09:20.558 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:09:21.381 SlewToCoordinatesAsync (Bad L)    OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:09:21.442 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:09:22.292 SlewToCoordinatesAsync (Bad H)    OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:09:44.520 SyncToCoordinates                 INFO     Slewed to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:09:44.534 SyncToCoordinates                 OK       Slewed to start position OK. DEC:  00:00:00.00
-18:09:47.045 SyncToCoordinates                 INFO     Synced to sync position within 71.8 arc seconds of expected RA: 02:15:07.79, actual RA: 02:15:03.00
-18:09:47.058 SyncToCoordinates                 INFO     Synced to sync position within 3660.0 arc seconds of expected DEC: -01:00:00.00, actual DEC:  00:01:00.00
-18:09:47.071 SyncToCoordinates                 OK       The TargetRightAscension property 02:15:07.79 matches the expected RA OK. 
-18:09:47.085 SyncToCoordinates                 OK       The TargetDeclination property -01:00:00.00 matches the expected Declination OK. 
-18:10:08.444 SyncToCoordinates                 INFO     Slewed back to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:10:08.458 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:10:10.791 SyncToCoordinates                 INFO     Synced to reversed sync position within 71.8 arc seconds of expected RA: 02:23:07.79, actual RA: 02:23:03.00
-18:10:10.806 SyncToCoordinates                 INFO     Synced to reversed sync position within 7200.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -01:00:00.00
-18:10:32.484 SyncToCoordinates                 INFO     Slewed back to start position within 56.8 arc seconds of expected RA: 02:19:07.79, actual RA: 02:19:04.00
-18:10:32.498 SyncToCoordinates                 OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:10:32.537 SyncToCoordinates (Bad L)         OK       Correctly rejected bad RA coordinate: -01:00:00.00
-18:10:33.329 SyncToCoordinates (Bad L)         OK       Correctly rejected bad Dec coordinate: -100:00:00.00
-18:10:33.389 SyncToCoordinates (Bad H)         OK       Correctly rejected bad RA coordinate: 25:00:00.00
-18:10:34.242 SyncToCoordinates (Bad H)         OK       Correctly rejected bad Dec coordinate: 100:00:00.00
-18:10:34.301 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension < 0 hours
-18:10:34.315 TargetRightAscension Write        OK       Invalid Value exception generated as expected on set TargetRightAscension > 24 hours
-18:10:34.979 TargetRightAscension Write        OK       Legal value 01:20:19.62 HH:MM:SS written successfully
-18:10:35.016 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
-18:10:35.032 TargetDeclination Write           OK       Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
-18:10:35.652 TargetDeclination Write           OK       Legal value  01:00:00.00 DD:MM:SS written successfully
-18:10:56.417 SlewToTarget                      INFO     Slewed within 14.8 arc seconds of expected RA: 02:20:20.99, actual RA: 02:20:20.00
-18:10:56.434 SlewToTarget                      INFO     Slewed within 21596.0 arc seconds of expected DEC:  03:00:00.00, actual DEC: -02:59:56.00
-18:10:56.449 SlewToTarget                      OK       The TargetRightAscension property 02:20:20.99 matches the expected RA OK. 
-18:10:56.463 SlewToTarget                      OK       The TargetDeclination property  03:00:00.00 matches the expected Declination OK. 
-18:10:56.504 SlewToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:10:56.676 SlewToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:10:56.736 SlewToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:10:56.915 SlewToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:11:20.512 SlewToTargetAsync                 INFO     Slewed within 35.1 arc seconds of expected RA: 01:20:42.34, actual RA: 01:20:40.00
-18:11:20.526 SlewToTargetAsync                 INFO     Slewed within 28797.0 arc seconds of expected DEC:  04:00:00.00, actual DEC: -03:59:57.00
-18:11:20.539 SlewToTargetAsync                 OK       The TargetRightAscension property 01:20:42.34 matches the expected RA OK. 
-18:11:20.553 SlewToTargetAsync                 OK       The TargetDeclination property  04:00:00.00 matches the expected Declination OK. 
-18:11:20.593 SlewToTargetAsync (Bad L)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:11:20.774 SlewToTargetAsync (Bad L)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:11:20.833 SlewToTargetAsync (Bad H)         OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:11:21.032 SlewToTargetAsync (Bad H)         OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:11:21.091 DestinationSideOfPier                      Test skipped as AligmentMode is not German Polar
-18:11:22.864 SlewToAltAz                       INFO     Slewed to within 144:49:47.00 DD:MM:SS of expected Azimuth: 150:00:00.00
-18:11:22.880 SlewToAltAz                       INFO     Slewed to within 46:00:01.00 DD:MM:SS of expected Altitude: 50:00:00.00
-18:11:22.920 SlewToAltAz (Bad L)               OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
-18:11:23.710 SlewToAltAz (Bad L)               OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
-18:11:23.771 SlewToAltAz (Bad H)               OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
-18:11:24.447 SlewToAltAz (Bad H)               OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
-18:11:31.196 SlewToAltAzAsync                  INFO     Slewed to within 149:51:53.00 DD:MM:SS of expected Azimuth: 155:00:00.00
-18:11:31.210 SlewToAltAzAsync                  INFO     Slewed to within 51:00:01.00 DD:MM:SS of expected Altitude: 55:00:00.00
-18:11:31.251 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Altitude coordinate: -100:00:00.00
-18:11:32.060 SlewToAltAzAsync (Bad L)          OK       Correctly rejected bad Azimuth coordinate: -10:00:00.00
-18:11:32.121 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Altitude coordinate: 100:00:00.00
-18:11:32.814 SlewToAltAzAsync (Bad H)          OK       Correctly rejected bad Azimuth coordinate: 370:00:00.00
-18:11:56.494 SyncToTarget                      INFO     Slewed to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:11:56.509 SyncToTarget                      OK       Slewed to start position OK. DEC:  00:00:00.00
-18:11:59.005 SyncToTarget                      INFO     Synced to sync position within 55.1 arc seconds of expected RA: 02:17:18.67, actual RA: 02:17:15.00
-18:11:59.019 SyncToTarget                      INFO     Synced to sync position within 3660.0 arc seconds of expected DEC: -01:00:00.00, actual DEC:  00:01:00.00
-18:12:22.398 SyncToTarget                      INFO     Slewed back to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:12:22.416 SyncToTarget                      OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:12:24.739 SyncToTarget                      INFO     Synced to reversed sync position within 55.1 arc seconds of expected RA: 02:25:18.67, actual RA: 02:25:15.00
-18:12:24.754 SyncToTarget                      INFO     Synced to reversed sync position within 7200.0 arc seconds of expected DEC:  01:00:00.00, actual DEC: -01:00:00.00
-18:12:46.438 SyncToTarget                      INFO     Slewed back to start position within 40.1 arc seconds of expected RA: 02:21:18.67, actual RA: 02:21:16.00
-18:12:46.452 SyncToTarget                      OK       Slewed back to start position OK. DEC:  00:00:00.00
-18:12:46.491 SyncToTarget (Bad L)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
-18:12:46.643 SyncToTarget (Bad L)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
-18:12:46.702 SyncToTarget (Bad H)              OK       Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
-18:12:46.884 SyncToTarget (Bad H)              OK       Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
-18:12:47.702 SyncToAltAz                       OK       CanSyncAltAz is False and a MethodNotImplementedException exception was generated as expected
- 
-SideOfPier Model Tests 
-18:12:47.769 SideOfPier Model Tests            INFO     Tests skipped because this driver does Not support SideOfPier Read
- 
-Post-run Checks 
-18:12:47.862 Mount Safety                      INFO     Tracking can't be turned off for this mount, please switch off manually.
- 
-Conformance test complete 
- 
-No errors, warnings or issues found: your driver passes ASCOM validation!! 
- 
-Driver Hash Value: 0C55C8535B9B3A4048581454F9D6A263EFD16E20AEC783762006739F671F586B64F1D8DD3E1E613C27A5B24838AEB8656C2A19BD1EE69177ECF2619599C0DA3C
-Report Hash Value: 671D83C15427DD14D9FA7F5A6C62D6B21372362C5173A2B95171D14D7442358DCF3950481797D63EB94E642D2563C3094C387C23D65466833FEA5E64CD045B46
- 
-The validation file is: C:\Users\colin\Documents\ASCOM\Logs 2019-05-08\ASCOM.MeadeAutostar497.Telescope.Validation.txt 

FocuserTestConsole/FocuserTestConsole.csproj

@@ -0,0 +1,64 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+    <ProductVersion>8.0.30703</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}</ProjectGuid>
+    <OutputType>Exe</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>ASCOM.MeadeGeneric</RootNamespace>
+    <AssemblyName>ASCOM.MeadeGeneric.Test</AssemblyName>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <TargetFrameworkProfile>
+    </TargetFrameworkProfile>
+    <FileAlignment>512</FileAlignment>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+    <PlatformTarget>x86</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="ASCOM.DeviceInterfaces, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
+    <Reference Include="ASCOM.DriverAccess, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Program.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="app.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>

FocuserTestConsole/Program.cs

@@ -0,0 +1,52 @@
+// This implements a console application that can be used to test an ASCOM driver
+//
+
+// This is used to define code in the template that is specific to one class implementation
+// unused code can be deleted and this definition removed.
+
+#define Telescope
+// remove this to bypass the code that uses the chooser to select the driver
+#define UseChooser
+
+using System;
+using System.Threading;
+using ASCOM.DriverAccess;
+
+namespace ASCOM.MeadeGeneric
+{
+    class Program
+    {
+        static void Main(string[] args)
+        {
+            // Uncomment the code that's required
+#if UseChooser
+            // choose the device
+            string id = Focuser.Choose("ASCOM.MeadeGeneric.Focuser");
+            if (string.IsNullOrEmpty(id))
+                return;
+            // create this device
+            Focuser device = new Focuser(id);
+#else
+            // this can be replaced by this code, it avoids the chooser and creates the driver class directly.
+            ASCOM.DriverAccess.Telescope device = new ASCOM.DriverAccess.Telescope("ASCOM.MeadeGeneric.Telescope");
+#endif
+            // now run some tests, adding code to your driver so that the tests will pass.
+            // these first tests are common to all drivers.
+            Console.WriteLine("name " + device.Name);
+            Console.WriteLine("description " + device.Description);
+            Console.WriteLine("DriverInfo " + device.DriverInfo);
+            Console.WriteLine("driverVersion " + device.DriverVersion);
+
+            // TODO add more code to test the driver.
+            device.Connected = true;
+
+            device.Move(2000);
+            Thread.Sleep(2000);
+            device.Move(-2000);
+
+            device.Connected = false;
+            Console.WriteLine("Press Enter to finish");
+            Console.ReadLine();
+        }
+    }
+}

FocuserTestConsole/Properties/AssemblyInfo.cs

@@ -1,15 +1,14 @@
 using System.Reflection;
-using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;
 
 // General Information about an assembly is controlled through the following 
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
-[assembly: AssemblyTitle("q Test Application")]
+[assembly: AssemblyTitle("MeadeGeneric Test Application")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("ASCOM Initiative")]
-[assembly: AssemblyProduct("q")]
+[assembly: AssemblyProduct("MeadeGeneric")]
 [assembly: AssemblyCopyright("Copyright © ASCOM Initiative 2014")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
@@ -32,5 +31,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 
-[assembly: AssemblyVersion("6.4.0.0")]
-[assembly: AssemblyFileVersion("6.4.0.0")]
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]

FocuserTestConsole/app.config

@@ -1,3 +1,3 @@
 <?xml version="1.0"?>
 <configuration>
-<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6"/></startup></configuration>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup></configuration>

Meade.net.Common/Meade.net.Common.csproj

@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{7A63F045-FC76-47B9-9DC6-59FA4B758FBB}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>Meade.net.Common</RootNamespace>
+    <AssemblyName>Meade.net.Common</AssemblyName>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>

Meade.net.Common/Properties/AssemblyInfo.cs

@@ -5,11 +5,11 @@ using System.Runtime.InteropServices;
 // General Information about an assembly is controlled through the following
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
-[assembly: AssemblyTitle("MeadeAutostar497.UnitTests")]
+[assembly: AssemblyTitle("Meade.net.Common")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("MeadeAutostar497.UnitTests")]
+[assembly: AssemblyProduct("Meade.net.Common")]
 [assembly: AssemblyCopyright("Copyright ©  2019")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
@@ -20,7 +20,7 @@ using System.Runtime.InteropServices;
 [assembly: ComVisible(false)]
 
 // The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("9638da27-77c7-4b30-a730-6e7159a4a09f")]
+[assembly: Guid("7a63f045-fc76-47b9-9dc6-59fa4b758fbb")]
 
 // Version information for an assembly consists of the following four values:
 //

Meade.net.Setup/AscomFocuserDriver.wxs

@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <!--
+    ASCOM Focuser Driver with COM registry entries suitable for a LocalServer Served Class
+  -->
+  <Fragment>
+    <DirectoryRef Id="INSTALLFOLDER" />
+    <ComponentGroup Id="cgAscomFocuserDriver">
+      <Component Id="cmpAscomFocuserDriver"
+                 Directory="INSTALLFOLDER"
+                 Guid="*"
+                 Win64="no">
+        <File Id="filFocuserDriverAssembly"
+              Source="$(var.Meade.net.focuser.TargetPath)"
+              KeyPath="yes"
+              Vital="yes"
+              Assembly=".net"
+              AssemblyApplication="filFocuserDriverAssembly" />
+        <!-- Registry entries suitable for a LocalServer served class -->
+        <!-- HKCR\CLSID\{driver-guid} -->
+        <RegistryKey Root="HKCR" Key="CLSID">
+          <RegistryKey Key="$(var.FocuserDriverClassId)">
+            <RegistryValue Value="$(var.FocuserDriverProgId)" Type="string"/>
+            <RegistryValue Name="AppId" Value="$(var.LocalServerAppId)" Type="string"/>
+            <RegistryKey Key="Implemented Categories">
+              <RegistryKey Key="{62C8FE65-4EBB-45e7-B440-6E39B2CDBF29}"
+                           ForceCreateOnInstall="yes"
+                           ForceDeleteOnUninstall="yes"/>
+            </RegistryKey>
+            <RegistryKey Key="ProgId">
+              <RegistryValue Value="$(var.FocuserDriverProgId)" Type="string"/>
+            </RegistryKey>
+            <RegistryKey Key="Programmable"
+                         ForceCreateOnInstall="yes"
+                         ForceDeleteOnUninstall="yes" />
+            <RegistryKey Key="LocalServer32">
+              <RegistryValue Value="[#filLocalServerAssembly]" Type="string"/>
+            </RegistryKey>
+          </RegistryKey>
+        </RegistryKey>
+
+        <!-- HKCR\{driver-prog-id} -->
+        <RegistryKey Root="HKCR" Key="$(var.FocuserDriverProgId)">
+          <RegistryValue Value="$(var.FocuserDriverDescription)" Type="string"/>
+          <RegistryKey Key="CLSID">
+            <RegistryValue Value="$(var.FocuserDriverClassId)" Type="string" />
+          </RegistryKey>
+        </RegistryKey>
+
+        <!--Register the driver with the ASCOM Profile-->
+        <RegistryKey Root="HKLM" Key="SOFTWARE\ASCOM\Focuser Drivers\$(var.FocuserDriverProgId)">
+          <RegistryValue Value="$(var.FocuserDriverDescription)" Type="string"/>
+        </RegistryKey>
+      </Component>
+    </ComponentGroup>
+  </Fragment>
+</Wix>

Meade.net.Setup/AscomLocalServer.wxs

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <Fragment>
+    <DirectoryRef Id="INSTALLFOLDER"/>
+    <ComponentGroup Id="cgAscomLocalServer" Directory="INSTALLFOLDER">
+      <Component Id="cmpAscomLocalServer" Guid="*" Win64="no">
+        <File Id="filLocalServerAssembly"
+              Source="$(var.Meade.net.TargetPath)"
+              KeyPath="yes"
+              Vital="yes"
+              Assembly=".net"
+              AssemblyApplication="filLocalServerAssembly" />
+      </Component>
+      <Component Id="cmpLocalServerRegistry" Win64="no">
+        <!-- LocalServer32 COM Registration -->
+        <RegistryKey Root="HKCR" Key="AppID" >
+          <!-- HKCR\AppID\{my-app-id} -->
+          <RegistryKey Key="$(var.LocalServerAppId)">
+            <RegistryValue Value="$(var.InstallName)" Type="string"/>
+            <RegistryValue Name="AppID" Value="$(var.LocalServerAppId)" Type="string"/>
+            <RegistryValue Name="AuthenticationLevel" Value="1" Type="integer"/>
+          </RegistryKey>
+          <!-- HKCR\AppID\{exe-name} -->
+          <RegistryKey Key="$(var.Meade.net.TargetFileName)">
+            <RegistryValue Name="AppID" Value="$(var.LocalServerAppId)" Type="string"/>
+          </RegistryKey>
+        </RegistryKey>
+      </Component>
+    </ComponentGroup>
+  </Fragment>
+</Wix>

Meade.net.Setup/AscomTelescopeDriver.wxs

@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <!--
+    ASCOM Telescope Driver with COM registry entries suitable for a LocalServer Served Class
+  -->
+  <Fragment>
+    <DirectoryRef Id="INSTALLFOLDER" />
+    <ComponentGroup Id="cgAscomTelescopeDriver">
+      <Component Id="cmpAscomTelescopeDriver"
+                 Directory="INSTALLFOLDER"
+                 Guid="*"
+                 Win64="no">
+        <File Id="filTelescopeDriverAssembly"
+              Source="$(var.Meade.net.Telescope.TargetPath)"
+              KeyPath="yes"
+              Vital="yes"
+              Assembly=".net"
+              AssemblyApplication="filTelescopeDriverAssembly" />
+        <!-- Registry entries suitable for a LocalServer served class -->
+        <!-- HKCR\CLSID\{driver-guid} -->
+        <RegistryKey Root="HKCR" Key="CLSID">
+          <RegistryKey Key="$(var.TelescopeDriverClassId)">
+            <RegistryValue Value="$(var.TelescopeDriverProgId)" Type="string"/>
+            <RegistryValue Name="AppId" Value="$(var.LocalServerAppId)" Type="string"/>
+            <RegistryKey Key="Implemented Categories">
+              <RegistryKey Key="{62C8FE65-4EBB-45e7-B440-6E39B2CDBF29}"
+                           ForceCreateOnInstall="yes"
+                           ForceDeleteOnUninstall="yes"/>
+            </RegistryKey>
+            <RegistryKey Key="ProgId">
+              <RegistryValue Value="$(var.TelescopeDriverProgId)" Type="string"/>
+            </RegistryKey>
+            <RegistryKey Key="Programmable"
+                         ForceCreateOnInstall="yes"
+                         ForceDeleteOnUninstall="yes" />
+            <RegistryKey Key="LocalServer32">
+              <RegistryValue Value="[#filLocalServerAssembly]" Type="string"/>
+            </RegistryKey>
+          </RegistryKey>
+        </RegistryKey>
+
+        <!-- HKCR\{driver-prog-id} -->
+        <RegistryKey Root="HKCR" Key="$(var.TelescopeDriverProgId)">
+          <RegistryValue Value="$(var.TelescopeDriverDescription)" Type="string"/>
+          <RegistryKey Key="CLSID">
+            <RegistryValue Value="$(var.TelescopeDriverClassId)" Type="string" />
+          </RegistryKey>
+        </RegistryKey>
+
+        <!--Register the driver with the ASCOM Profile-->
+        <RegistryKey Root="HKLM" Key="SOFTWARE\ASCOM\Telescope Drivers\$(var.TelescopeDriverProgId)">
+          <RegistryValue Value="$(var.TelescopeDriverDescription)" Type="string"/>
+        </RegistryKey>
+      </Component>
+    </ComponentGroup>
+  </Fragment>
+</Wix>

Meade.net.Setup/Config.wxi

@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8" ?>
+
+<Include>
+  <!--
+    User Configuration - you must ensure all these variables have correct values for your project. 
+    GUIDs specified here must match those used in the project files, and must be unique to this product.
+    The LocalServerAppId is defined in the Server project, in LocalServer.cs
+    Driver Class IDs are defined in each driver class, in the [Guid()] attribute.
+    Driver ProgIDs must match those used in the source code, typically this will be defined in the LocalServer
+    project as a constant in the SharedResources static class.
+    UpgradeCode must be unique to this product and should not be changed for the product lifetime.
+  -->
+
+  <?define InstallName = "ASCOM Meade Generic" ?>
+  <?define Manufacturer = "cjdawson.com" ?>
+  <?define UpgradeCode = "{57597bb6-f207-4998-97f4-8a041950d062}" ?>
+  <?define INSTALLFOLDER = "$(var.InstallName)" ?>
+  
+  <?define LocalServerAppId = "{4e68ec46-5ffc-49e7-b298-38a548df0bfd}" ?>
+  <?define CopyrightNotice="Copyright © 2019 cjdawson.com, all rights reserved" ?>
+
+  <?define TelescopeDriverClassId="{d9fd4b3e-c4f1-48ac-a16f-d02eef30d86f}" ?>
+  <?define TelescopeDriverProgId="ASCOM.MeadeGeneric.Telescope" ?>
+  <?define TelescopeDriverDescription="Meade Generic"?>
+
+  <?define FocuserDriverClassId="{a32ac647-bf0f-42f9-8ab0-d166fa5884ad}" ?>
+  <?define FocuserDriverProgId="ASCOM.MeadeGeneric.focuser" ?>
+  <?define FocuserDriverDescription="Meade Generic" ?>
+
+  <!-- End of User Configuration - do not edit anything beyond this point -->
+
+  <!-- Define platform-specific names and locations -->
+<!--  <?if $(var.Platform) = x64 ?>
+  <?define ProductName = "$(var.InstallName) (x64)" ?>
+  <?define Win64 = "yes" ?>
+  <?define PlatformProgramFilesFolder = "ProgramFiles64Folder" ?>
+  <?define PlatformCommonFilesFolder = "CommonFiles64Folder" ?>
+  <?else ?>-->
+  <?define ProductName = "$(var.InstallName) (x86)" ?>
+  <?define Win64 = "no" ?>
+  <?define PlatformProgramFilesFolder = "ProgramFilesFolder" ?>
+  <?define PlatformCommonFilesFolder = "CommonFilesFolder" ?>
+<!--  <?endif ?> -->
+
+  <!-- Set installer version based on the file version of the main assembly. -->
+  <?define ProductVersion="!(bind.FileVersion.filLocalServerAssembly)"?>
+  <!--<?define ProductVersion="0.7.0.0"?>-->
+</Include>

Meade.net.Setup/Directories.wxs

@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <Fragment>
+    <Directory Id="TARGETDIR" Name="SourceDir">
+      <Directory Id="ProgramFilesFolder">
+        <Directory Id="dirManufacturer" Name="$(var.Manufacturer)">
+          <Directory Id="INSTALLFOLDER" Name="$(var.InstallName)"/>
+        </Directory>
+      </Directory>
+    </Directory>
+  </Fragment>
+</Wix>

Meade.net.Setup/FeatureTree.wxs

@@ -0,0 +1,15 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" >
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <Fragment>
+    <FeatureGroup Id="fgRoot" >
+      <Feature Id="featAscomDrivers" Title="ASCOM drivers" Level="1" Absent="disallow"
+               Display="expand" >
+        <ComponentGroupRef Id="cgAscomLocalServer" />
+        <ComponentGroupRef Id="cgAscomTelescopeDriver"/>
+        <ComponentGroupRef Id="cgAscomFocuserDriver"/>
+      </Feature>
+    </FeatureGroup>
+  </Fragment>
+</Wix>

Meade.net.Setup/InstallationUI.wxs

@@ -0,0 +1,81 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Copyright (c) .NET Foundation and contributors. All rights reserved. Licensed under the Microsoft Reciprocal License. See LICENSE.TXT file in the project root for full license information. -->
+
+
+
+<!--
+First-time install dialog sequence:
+ - WixUI_WelcomeDlg
+ - WixUI_LicenseAgreementDlg
+ - WixUI_InstallDirDlg
+ - WixUI_VerifyReadyDlg
+ - WixUI_DiskCostDlg
+
+Maintenance dialog sequence:
+ - WixUI_MaintenanceWelcomeDlg
+ - WixUI_MaintenanceTypeDlg
+ - WixUI_InstallDirDlg
+ - WixUI_VerifyReadyDlg
+
+Patch dialog sequence:
+ - WixUI_WelcomeDlg
+ - WixUI_VerifyReadyDlg
+
+-->
+
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <Fragment>
+    <UI Id="InstallationUI">
+      <TextStyle Id="WixUI_Font_Normal" FaceName="Tahoma" Size="8" />
+      <TextStyle Id="WixUI_Font_Bigger" FaceName="Tahoma" Size="12" />
+      <TextStyle Id="WixUI_Font_Title" FaceName="Tahoma" Size="9" Bold="yes" />
+
+      <Property Id="DefaultUIFont" Value="WixUI_Font_Normal" />
+      <Property Id="WixUI_Mode" Value="InstallDir" />
+
+      <DialogRef Id="BrowseDlg" />
+      <DialogRef Id="DiskCostDlg" />
+      <DialogRef Id="ErrorDlg" />
+      <DialogRef Id="FatalError" />
+      <DialogRef Id="FilesInUse" />
+      <DialogRef Id="MsiRMFilesInUse" />
+      <DialogRef Id="PrepareDlg" />
+      <DialogRef Id="ProgressDlg" />
+      <DialogRef Id="ResumeDlg" />
+      <DialogRef Id="UserExit" />
+
+      <Publish Dialog="BrowseDlg" Control="OK" Event="DoAction" Value="WixUIValidatePath" Order="3">1</Publish>
+      <Publish Dialog="BrowseDlg" Control="OK" Event="SpawnDialog" Value="InvalidDirDlg" Order="4"><![CDATA[NOT WIXUI_DONTVALIDATEPATH AND WIXUI_INSTALLDIR_VALID<>"1"]]></Publish>
+
+      <Publish Dialog="ExitDialog" Control="Finish" Event="EndDialog" Value="Return" Order="999">1</Publish>
+
+      <Publish Dialog="WelcomeDlg" Control="Next" Event="NewDialog" Value="LicenseAgreementDlg">NOT Installed</Publish>
+      <Publish Dialog="WelcomeDlg" Control="Next" Event="NewDialog" Value="VerifyReadyDlg">Installed AND PATCH</Publish>
+
+      <Publish Dialog="LicenseAgreementDlg" Control="Back" Event="NewDialog" Value="WelcomeDlg">1</Publish>
+      <Publish Dialog="LicenseAgreementDlg" Control="Next" Event="NewDialog" Value="InstallDirDlg">LicenseAccepted = "1"</Publish>
+
+      <Publish Dialog="InstallDirDlg" Control="Back" Event="NewDialog" Value="LicenseAgreementDlg">1</Publish>
+      <Publish Dialog="InstallDirDlg" Control="Next" Event="SetTargetPath" Value="[WIXUI_INSTALLDIR]" Order="1">1</Publish>
+      <Publish Dialog="InstallDirDlg" Control="Next" Event="DoAction" Value="WixUIValidatePath" Order="2">NOT WIXUI_DONTVALIDATEPATH</Publish>
+      <Publish Dialog="InstallDirDlg" Control="Next" Event="SpawnDialog" Value="InvalidDirDlg" Order="3"><![CDATA[NOT WIXUI_DONTVALIDATEPATH AND WIXUI_INSTALLDIR_VALID<>"1"]]></Publish>
+      <Publish Dialog="InstallDirDlg" Control="Next" Event="NewDialog" Value="VerifyReadyDlg" Order="4">WIXUI_DONTVALIDATEPATH OR WIXUI_INSTALLDIR_VALID="1"</Publish>
+      <Publish Dialog="InstallDirDlg" Control="ChangeFolder" Property="_BrowseProperty" Value="[WIXUI_INSTALLDIR]" Order="1">1</Publish>
+      <Publish Dialog="InstallDirDlg" Control="ChangeFolder" Event="SpawnDialog" Value="BrowseDlg" Order="2">1</Publish>
+
+      <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="InstallDirDlg" Order="1">NOT Installed</Publish>
+      <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="MaintenanceTypeDlg" Order="2">Installed AND NOT PATCH</Publish>
+      <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="WelcomeDlg" Order="2">Installed AND PATCH</Publish>
+
+      <Publish Dialog="MaintenanceWelcomeDlg" Control="Next" Event="NewDialog" Value="MaintenanceTypeDlg">1</Publish>
+
+      <Publish Dialog="MaintenanceTypeDlg" Control="RepairButton" Event="NewDialog" Value="VerifyReadyDlg">1</Publish>
+      <Publish Dialog="MaintenanceTypeDlg" Control="RemoveButton" Event="NewDialog" Value="VerifyReadyDlg">1</Publish>
+      <Publish Dialog="MaintenanceTypeDlg" Control="Back" Event="NewDialog" Value="MaintenanceWelcomeDlg">1</Publish>
+
+      <Property Id="ARPNOMODIFY" Value="1" />
+    </UI>
+
+    <UIRef Id="WixUI_Common" />
+  </Fragment>
+</Wix>

Meade.net.Setup/Meade.net.Setup.wixproj

@@ -0,0 +1,91 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" DefaultTargets="Build" InitialTargets="EnsureWixToolsetInstalled" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+    <ProductVersion>3.10</ProductVersion>
+    <ProjectGuid>8eeb5c25-8394-4257-8e57-cded47cb6f1b</ProjectGuid>
+    <SchemaVersion>2.0</SchemaVersion>
+    <OutputName>Meade.net.Setup</OutputName>
+    <OutputType>Package</OutputType>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+    <OutputPath>bin\$(Platform)\$(Configuration)\</OutputPath>
+    <IntermediateOutputPath>obj\$(Configuration)\</IntermediateOutputPath>
+    <DefineConstants>Debug</DefineConstants>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+    <OutputPath>bin\$(Configuration)\</OutputPath>
+    <IntermediateOutputPath>obj\$(Configuration)\</IntermediateOutputPath>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+    <DefineConstants>Debug</DefineConstants>
+    <OutputPath>bin\$(Configuration)\$(Platform)\</OutputPath>
+    <IntermediateOutputPath>obj\$(Platform)\$(Configuration)\</IntermediateOutputPath>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+    <OutputPath>bin\$(Platform)\$(Configuration)\</OutputPath>
+    <IntermediateOutputPath>obj\$(Platform)\$(Configuration)\</IntermediateOutputPath>
+  </PropertyGroup>
+  <ItemGroup>
+    <Compile Include="AscomLocalServer.wxs" />
+    <Compile Include="AscomTelescopeDriver.wxs" />
+    <Compile Include="AscomFocuserDriver.wxs" />
+    <Compile Include="Directories.wxs" />
+    <Compile Include="FeatureTree.wxs" />
+    <Compile Include="InstallationUI.wxs" />
+    <Compile Include="Product.wxs" />
+  </ItemGroup>
+  <ItemGroup>
+    <WixExtension Include="WixUIExtension">
+      <HintPath>$(WixExtDir)\WixUIExtension.dll</HintPath>
+      <Name>WixUIExtension</Name>
+    </WixExtension>
+    <WixExtension Include="WixNetFxExtension">
+      <HintPath>$(WixExtDir)\WixNetFxExtension.dll</HintPath>
+      <Name>WixNetFxExtension</Name>
+    </WixExtension>
+  </ItemGroup>
+  <ItemGroup>
+    <Content Include="Config.wxi" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Meade.net.focuser\Meade.net.focuser.csproj">
+      <Name>Meade.net.focuser</Name>
+      <Project>{a97e3aec-f11d-49da-b259-de99da813a86}</Project>
+      <Private>True</Private>
+      <DoNotHarvest>True</DoNotHarvest>
+      <RefProjectOutputGroups>Binaries;Content;Satellites</RefProjectOutputGroups>
+      <RefTargetDir>INSTALLFOLDER</RefTargetDir>
+    </ProjectReference>
+    <ProjectReference Include="..\Meade.net.Telescope\Meade.net.Telescope.csproj">
+      <Name>Meade.net.Telescope</Name>
+      <Project>{64308775-bd4a-469c-bcab-3ed830b811af}</Project>
+      <Private>True</Private>
+      <DoNotHarvest>True</DoNotHarvest>
+      <RefProjectOutputGroups>Binaries;Content;Satellites</RefProjectOutputGroups>
+      <RefTargetDir>INSTALLFOLDER</RefTargetDir>
+    </ProjectReference>
+    <ProjectReference Include="..\Meade.net\Meade.net.csproj">
+      <Name>Meade.net</Name>
+      <Project>{3689a2cb-94c5-4012-a5cf-7e7d1dd27143}</Project>
+      <Private>True</Private>
+      <DoNotHarvest>True</DoNotHarvest>
+      <RefProjectOutputGroups>Binaries;Content;Satellites</RefProjectOutputGroups>
+      <RefTargetDir>INSTALLFOLDER</RefTargetDir>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(WixTargetsPath)" Condition=" '$(WixTargetsPath)' != '' " />
+  <Import Project="$(MSBuildExtensionsPath32)\Microsoft\WiX\v3.x\Wix.targets" Condition=" '$(WixTargetsPath)' == '' AND Exists('$(MSBuildExtensionsPath32)\Microsoft\WiX\v3.x\Wix.targets') " />
+  <Target Name="EnsureWixToolsetInstalled" Condition=" '$(WixTargetsImported)' != 'true' ">
+    <Error Text="The WiX Toolset v3.11 (or newer) build tools must be installed to build this project. To download the WiX Toolset, see http://wixtoolset.org/releases/" />
+  </Target>
+  <!--
+	To modify your build process, add your task inside one of the targets below and uncomment it.
+	Other similar extension points exist, see Wix.targets.
+	<Target Name="BeforeBuild">
+	</Target>
+	<Target Name="AfterBuild">
+	</Target>
+	-->
+</Project>

Meade.net.Setup/Product.wxs

@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+  <?include $(sys.CURRENTDIR)\Config.wxi?>
+  <Product Id="*"
+           Name="$(var.InstallName)"
+           Language="1033"
+           Version="$(var.ProductVersion)"
+           Manufacturer="$(var.Manufacturer)"
+           UpgradeCode="$(var.UpgradeCode)">
+		<Package InstallerVersion="200" Compressed="yes" InstallScope="perMachine" />
+
+		<MajorUpgrade DowngradeErrorMessage="A newer version of [ProductName] is already installed." />
+
+    <MediaTemplate EmbedCab="yes" />
+
+    <Property Id="ASCOMPLATFORMVERSION">
+      <RegistrySearch Id="AscomPlatformVersion"
+                      Root="HKLM"
+                      Key="SOFTWARE\ASCOM\Platform"
+                      Name="Platform Version"
+                      Type="raw" />
+    </Property>
+
+    <Condition Message="This application requires Ascom Platform 6.4 SP1 or higher. Please install this before installing the driver.">
+      <![CDATA[Installed OR ASCOMPLATFORMVERSION >= "6.4.1"]]>
+    </Condition>
+
+    <PropertyRef Id="NETFRAMEWORK40FULL"/>
+    <Condition Message="This application requires .NET Framework 4.0 or higher. Please install the .NET Framework then run this installer again.">
+      <![CDATA[Installed OR NETFRAMEWORK40FULL]]>
+    </Condition>
+
+    <!--todo create a method to check if ASCOM is installed.-->
+    <!--<Condition Message="This application requires ASCOM Platform 6.4 or later.  Please install this and try again.">
+      <![CDATA[Installed or WIX_IS_NETFRAMEWORK_471_OR_LATER_INSTALLED]]>
+    </Condition>-->
+
+   <!-- <Condition Message="Please use the correct installer for your operating system - x86 for 32-bit, x64 for 64-bit.">
+      <?if $(var.Win64) = "yes" ?>
+      VersionNT64
+      <?else?>
+      NOT VersionNT64
+      <?endif?>
+    </Condition> -->
+
+    
+    <UIRef Id="InstallationUI"/>
+    <Property Id="WIXUI_INSTALLDIR" Value="INSTALLFOLDER" />
+
+    <FeatureGroupRef Id="fgRoot"/>
+	</Product>
+</Wix>

Meade.net.Telescope.UnitTests/Meade.net.Telescope.UnitTests.csproj

@@ -1,16 +1,16 @@
 <?xml version="1.0" encoding="utf-8"?>
 <Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="..\packages\NUnit.3.11.0\build\NUnit.props" Condition="Exists('..\packages\NUnit.3.11.0\build\NUnit.props')" />
+  <Import Project="..\packages\NUnit.3.12.0\build\NUnit.props" Condition="Exists('..\packages\NUnit.3.12.0\build\NUnit.props')" />
   <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
   <PropertyGroup>
     <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
     <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProjectGuid>{9638DA27-77C7-4B30-A730-6E7159A4A09F}</ProjectGuid>
+    <ProjectGuid>{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}</ProjectGuid>
     <OutputType>Library</OutputType>
     <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>MeadeAutostar497.UnitTests</RootNamespace>
-    <AssemblyName>MeadeAutostar497.UnitTests</AssemblyName>
-    <TargetFrameworkVersion>v4.6.2</TargetFrameworkVersion>
+    <RootNamespace>Meade.net.Telescope.UnitTests</RootNamespace>
+    <AssemblyName>Meade.net.Telescope.UnitTests</AssemblyName>
+    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
     <FileAlignment>512</FileAlignment>
     <Deterministic>true</Deterministic>
     <NuGetPackageImportStamp>
@@ -26,7 +26,7 @@
     <ErrorReport>prompt</ErrorReport>
     <WarningLevel>4</WarningLevel>
     <Prefer32Bit>false</Prefer32Bit>
-    <PlatformTarget>x64</PlatformTarget>
+    <PlatformTarget>x86</PlatformTarget>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
     <DebugType>pdbonly</DebugType>
@@ -37,6 +37,24 @@
     <WarningLevel>4</WarningLevel>
     <Prefer32Bit>false</Prefer32Bit>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>bin\x86\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <OutputPath>bin\x86\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <Optimize>true</Optimize>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="ASCOM.Astrometry, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
       <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Astrometry.dll</HintPath>
@@ -72,47 +90,45 @@
       <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.Video.dll</HintPath>
     </Reference>
     <Reference Include="Castle.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc, processorArchitecture=MSIL">
-      <HintPath>..\packages\Castle.Core.4.3.1\lib\net45\Castle.Core.dll</HintPath>
+      <HintPath>..\packages\Castle.Core.4.4.0\lib\net45\Castle.Core.dll</HintPath>
     </Reference>
-    <Reference Include="Moq, Version=4.10.0.0, Culture=neutral, PublicKeyToken=69f491c39445e920, processorArchitecture=MSIL">
-      <HintPath>..\packages\Moq.4.10.1\lib\net45\Moq.dll</HintPath>
+    <Reference Include="Moq, Version=4.12.0.0, Culture=neutral, PublicKeyToken=69f491c39445e920, processorArchitecture=MSIL">
+      <HintPath>..\packages\Moq.4.12.0\lib\net45\Moq.dll</HintPath>
     </Reference>
-    <Reference Include="nunit.framework, Version=3.11.0.0, Culture=neutral, PublicKeyToken=2638cd05610744eb, processorArchitecture=MSIL">
-      <HintPath>..\packages\NUnit.3.11.0\lib\net45\nunit.framework.dll</HintPath>
+    <Reference Include="nunit.framework, Version=3.12.0.0, Culture=neutral, PublicKeyToken=2638cd05610744eb, processorArchitecture=MSIL">
+      <HintPath>..\packages\NUnit.3.12.0\lib\net40\nunit.framework.dll</HintPath>
     </Reference>
     <Reference Include="System" />
     <Reference Include="System.Configuration" />
     <Reference Include="System.Core" />
-    <Reference Include="System.IO.Compression" />
-    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=4.0.4.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.4.5.0\lib\netstandard1.0\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
+    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=4.0.4.1, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.4.5.2\lib\netstandard1.0\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
     </Reference>
-    <Reference Include="System.Runtime.Serialization" />
-    <Reference Include="System.ServiceModel" />
     <Reference Include="System.Threading.Tasks.Extensions, Version=4.2.0.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.1\lib\portable-net45+win8+wp8+wpa81\System.Threading.Tasks.Extensions.dll</HintPath>
+      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.2\lib\portable-net45+win8+wp8+wpa81\System.Threading.Tasks.Extensions.dll</HintPath>
     </Reference>
-    <Reference Include="System.Transactions" />
-    <Reference Include="System.Windows" />
-    <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml.Linq" />
     <Reference Include="System.Data.DataSetExtensions" />
     <Reference Include="Microsoft.CSharp" />
     <Reference Include="System.Data" />
     <Reference Include="System.Xml" />
-    <Reference Include="WindowsBase" />
   </ItemGroup>
   <ItemGroup>
-    <Compile Include="TelescopeControllerUnitTests.cs" />
+    <Compile Include="TelescopeUnitTests.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="..\MeadeAutostar497\MeadeAutostar497.csproj">
+    <ProjectReference Include="..\Meade.net.Telescope\Meade.net.Telescope.csproj">
       <Project>{64308775-bd4a-469c-bcab-3ed830b811af}</Project>
-      <Name>MeadeAutostar497</Name>
+      <Name>Meade.net.Telescope</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\Meade.net\Meade.net.csproj">
+      <Project>{3689a2cb-94c5-4012-a5cf-7e7d1dd27143}</Project>
+      <Name>Meade.net</Name>
     </ProjectReference>
   </ItemGroup>
   <ItemGroup>
+    <None Include="app.config" />
     <None Include="BootstrapAscomProfileStore.ps1" />
     <None Include="packages.config" />
   </ItemGroup>
@@ -121,6 +137,6 @@
     <PropertyGroup>
       <ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them.  For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
     </PropertyGroup>
-    <Error Condition="!Exists('..\packages\NUnit.3.11.0\build\NUnit.props')" Text="$([System.String]::Format('$(ErrorText)', '..\packages\NUnit.3.11.0\build\NUnit.props'))" />
+    <Error Condition="!Exists('..\packages\NUnit.3.12.0\build\NUnit.props')" Text="$([System.String]::Format('$(ErrorText)', '..\packages\NUnit.3.12.0\build\NUnit.props'))" />
   </Target>
 </Project>

Meade.net.Telescope.UnitTests/Properties/AssemblyInfo.cs

@@ -0,0 +1,35 @@
+using System.Reflection;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Meade.net.Telescope.UnitTests")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Meade.net.Telescope.UnitTests")]
+[assembly: AssemblyCopyright("Copyright ©  2019")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("b7eeeefd-5bff-443d-981c-7b8ab5dfde33")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]

Meade.net.Telescope.UnitTests/app.config

@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="utf-8"?>
+<configuration>
+  <runtime>
+    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+      <dependentAssembly>
+        <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
+        <bindingRedirect oldVersion="0.0.0.0-4.0.4.1" newVersion="4.0.4.1"/>
+      </dependentAssembly>
+    </assemblyBinding>
+  </runtime>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2"/></startup></configuration>

Meade.net.Telescope.UnitTests/packages.config

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="ASCOM.Platform" version="6.4.2" targetFramework="net472" />
+  <package id="Castle.Core" version="4.4.0" targetFramework="net45" />
+  <package id="Moq" version="4.12.0" targetFramework="net45" />
+  <package id="NUnit" version="3.12.0" targetFramework="net40" requireReinstallation="true" />
+  <package id="System.Runtime.CompilerServices.Unsafe" version="4.5.2" targetFramework="net45" requireReinstallation="true" />
+  <package id="System.Threading.Tasks.Extensions" version="4.5.2" targetFramework="net45" requireReinstallation="true" />
+</packages>

Meade.net.Telescope/AstroMaths/AltitudeData.cs

@@ -0,0 +1,12 @@
+using System;
+
+namespace ASCOM.Meade.net.AstroMaths
+{
+    public class AltitudeData
+    {
+        public DateTime UtcDateTime { get; set; }
+        public double SiteLatitude { get; set; }
+        public double SiteLongitude { get; set; }
+        public EquatorialCoordinates EquatorialCoordinates { get; set; }
+    }
+}

Meade.net.Telescope/AstroMaths/AstroMaths.cs

@@ -0,0 +1,191 @@
+using System;
+using ASCOM.Utilities;
+
+namespace ASCOM.Meade.net.AstroMaths
+{
+    public class AstroMaths : IAstroMaths
+    {
+
+        //returns the decimal hour angle for given right ascension on a given datetime for a given logitude.
+        public double RightAscensionToHourAngle(DateTime utcDateTime, double longitude, double rightAscension)
+        {
+            var ut = DateTimeToDecimalHours( utcDateTime);
+            var gst = UTtoGst( utcDateTime);
+            var lst = GsTtoLst( gst, longitude);
+            var raHours = rightAscension;
+            var h1 = lst - raHours;
+            var h = h1;
+
+            if (h < 0)
+                h = h + 24;
+
+            return h;
+        }
+
+        public double HourAngleToRightAscension(DateTime utcDateTime, double longitude, double hourAngle )
+        {
+            var gst = UTtoGst(utcDateTime);
+            var lst = GsTtoLst( gst, longitude);
+            var raHours = hourAngle;
+            var h1 = lst - raHours;
+            var h = h1;
+            if (h1 < 0)
+            {
+                h += 24;
+            }
+
+            return h;
+        }
+
+        public EquatorialCoordinates ConvertHozToEq( DateTime utcDateTime, double latitude, double longitude, HorizonCoordinates altAz)
+        {
+            var az = DegreesToRadians(altAz.Azimuth);
+            var alt = DegreesToRadians(altAz.Altitude);
+            var lat = DegreesToRadians(latitude);
+            
+            var sinDec = Math.Sin(alt) * Math.Sin(lat) + Math.Cos(alt) * Math.Cos(lat) * Math.Cos(az);
+            var dec = RadiansToDegrees(Math.Asin(sinDec));
+            
+            var y = -Math.Cos(alt) * Math.Cos(lat) * Math.Sin(az);
+            var x = Math.Sin(alt) - Math.Sin(lat) * sinDec;
+            var upperA = Math.Atan2(y,x);
+            var upperB = RadiansToDegrees(upperA);
+
+            var ha = upperB;
+
+            if (upperB < 0)
+            {
+                ha += 360;
+            }
+
+            ha = ha / 15;
+
+            EquatorialCoordinates equatorialCoordinates = new EquatorialCoordinates
+            {
+                RightAscension = HourAngleToRightAscension( utcDateTime, longitude, ha ),
+                Declination = dec
+            };
+
+            return equatorialCoordinates;
+        }
+
+        public HorizonCoordinates ConvertEqToHoz(double hourAngle, double latitude, EquatorialCoordinates raDec)
+        {
+            var h = hourAngle * 15;
+            var h1 = DegreesToRadians(h);
+            var d = DegreesToRadians(raDec.Declination);
+            var lat = DegreesToRadians(latitude);
+            var sinA = Math.Sin(d) * Math.Sin(lat) + Math.Cos(d) * Math.Cos(lat) * Math.Cos(h1);
+
+             var y = -Math.Cos(d) * Math.Cos(lat) * Math.Sin(h1);
+            var x = Math.Sin(d) - Math.Sin(lat) * sinA;
+            var upperA = Math.Atan2(y, x);
+            var upperB = RadiansToDegrees(upperA);
+
+            var horizonCoordinates = new HorizonCoordinates();
+            horizonCoordinates.Altitude = RadiansToDegrees(Math.Asin(sinA));
+
+            horizonCoordinates.Azimuth = upperB;
+
+            if (upperB < 0)
+            {
+                horizonCoordinates.Azimuth = 360 + horizonCoordinates.Azimuth;
+            }
+            
+            return horizonCoordinates;
+        }
+
+
+        //todo convert to extension method
+        public double DegreesToRadians(double degrees)
+        {
+            return (Math.PI / 180) * degrees;
+        }
+
+        //todo convert to extension method
+        public double RadiansToDegrees(double radians)
+        {
+            double degrees = (180 / Math.PI) * radians;
+            return (degrees);
+        }
+
+        //todo convert to extension method
+        public double DateTimeToDecimalHours( DateTime utcDateTime)
+        {
+            double sec = utcDateTime.Second;
+            double min = utcDateTime.Minute;
+            double hour = utcDateTime.Hour;
+			
+            var a = Math.Abs(sec) / 60;
+            var b = (Math.Abs(min) + a) / 60;
+            var c = Math.Abs(hour) + b;
+
+            var d = c;
+
+            if ((hour < 0) || (min < 0) || (sec < 0))
+                d = -c;
+
+            return d;
+        }
+
+        //todo convert to extension method
+        public double UTtoGst(DateTime utcDateTime)
+        {
+            Util util = new Util();
+
+            var jd = util.DateUTCToJulian(utcDateTime) - 0.5;
+            if ((jd % 1) <= 0.5 )
+                jd = Math.Floor( jd );
+            else
+                jd = Math.Floor( jd ) + 0.5;
+
+            var s = jd - 2451545.0;
+            var t = s / 36525.0;
+            var t0 = 6.697374558 + (2400.051336 * t ) +(0.000025862 * (t * t) );
+
+            while (t0 < 0)
+            {
+                t0 += 24;
+            }
+
+            while (t0 >= 24)
+            {
+                t0 -= 24;
+            }
+			
+            var ut = DateTimeToDecimalHours(utcDateTime);
+            var a = ut * 1.002737909;
+
+            var t1 = t0 + a;
+
+            while (t1 < 0)
+            {
+                t1 += 24;
+            }
+
+            while (t1 >= 24)
+            {
+                t1 -= 24;
+            }
+
+            return t1;
+        }
+
+        public double GsTtoLst(double gst, double longitude)
+        {
+            var l = longitude/ 15;
+
+            var lst = gst + l;
+            while (lst < 0 )
+            {
+                lst += 24;
+            }
+            while (lst >= 24)
+            {
+                lst -= 24;
+            }
+
+            return lst;
+        }
+    }
+}

Meade.net.Telescope/AstroMaths/EquatorialCoordinates.cs

@@ -0,0 +1,8 @@
+namespace ASCOM.Meade.net.AstroMaths
+{
+    public class EquatorialCoordinates
+    {
+        public double RightAscension { get; set; }
+        public double Declination { get; set; }
+    }
+}

Meade.net.Telescope/AstroMaths/HorizonCoordinates.cs

@@ -0,0 +1,8 @@
+namespace ASCOM.Meade.net.AstroMaths
+{
+    public class HorizonCoordinates
+    {
+        public double Altitude { get; set; }
+        public double Azimuth { get; set; }
+    }
+}

Meade.net.Telescope/AstroMaths/IAstroMaths.cs

@@ -0,0 +1,17 @@
+using System;
+
+namespace ASCOM.Meade.net.AstroMaths
+{
+    public interface IAstroMaths
+    {
+        double RightAscensionToHourAngle(DateTime utcDateTime, double longitude, double rightAscension);
+        double HourAngleToRightAscension(DateTime utcDateTime, double longitude, double hourAngle );
+        EquatorialCoordinates ConvertHozToEq( DateTime utcDateTime, double latitude, double longitude, HorizonCoordinates altAz);
+        HorizonCoordinates ConvertEqToHoz(double hourAngle, double latitude, EquatorialCoordinates raDec);
+        double DegreesToRadians(double degrees);
+        double RadiansToDegrees(double radians);
+        double DateTimeToDecimalHours( DateTime utcDateTime);
+        double UTtoGst(DateTime utcDateTime);
+        double GsTtoLst(double gst, double longitude);
+    }
+}

Meade.net.Telescope/BootstrapAscomProfileStore.ps1

@@ -0,0 +1,36 @@
+<#
+This script initializes a bare minimum set of registry entries required for ASCOM.Utilities.Profile to work
+without throwing any exceptions. When building on a build server, or on a computer without the ASCOM Platform installed,
+it may be useful to execute this script as a build step prior to running any unit tests, or calling any code that relies on
+ASCOM.Utilities.Profile. The alternative is to install the ASCOM Platform on the build agent.
+
+NOTE: This script equires elevated permissions because it creates registry keys in the LocalMachine hive.
+#>
+
+$wow = Test-Path HKLM:\SOFTWARE\Wow6432Node
+if ($wow)
+    {
+    $root = "HKLM:\SOFTWARE\Wow6432Node"
+    }
+else
+    {
+    $root = "HKLM:\SOFTWARE"
+    }
+$ascomRoot = $root + "\ASCOM"
+
+if (Test-Path $ascomRoot) 
+    {
+    <# Don't upset an already-existing ASCOM registry #>
+    exit
+    }
+
+<# Create the ASCOM root key and set it's ACL to allow all users read/write access #>
+New-Item -Path $root -Name ASCOM –Force
+$ascomAcl = Get-Acl $ascomRoot
+$aclRule = New-Object System.Security.AccessControl.RegistryAccessRule ("Users","FullControl","Allow")
+$ascomAcl.SetAccessRule($aclRule)
+$ascomAcl | Set-Acl -Path $ascomRoot
+
+<# Now create the bare minimum keys required so that ASCOM.Utilities.Profile doesn't crash and burn #>
+New-ItemProperty -Path $ascomRoot -Name PlatformVersion -Value "6.1" -PropertyType String –Force
+New-ItemProperty -Path $ascomRoot -Name SerTraceFile -Value "C:\SerialTraceAuto.txt" -PropertyType String –Force

Meade.net.Telescope/DoubleExtensions.cs

@@ -0,0 +1,14 @@
+namespace ASCOM.Meade.net
+{
+    public static class DoubleExtensions
+    {
+        public static bool InRange(this double value, double low, double high)
+        {
+            if (value < low)
+                return false;
+            if (value > high)
+                return false;
+            return true;
+        }
+    }
+}

Meade.net.Telescope/Meade.net.Telescope.csproj

@@ -8,14 +8,14 @@
     <ProjectGuid>{64308775-BD4A-469C-BCAB-3ED830B811AF}</ProjectGuid>
     <OutputType>Library</OutputType>
     <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>ASCOM.MeadeAutostar497</RootNamespace>
-    <AssemblyName>ASCOM.MeadeAutostar497.Telescope</AssemblyName>
+    <RootNamespace>ASCOM.Meade.net</RootNamespace>
+    <AssemblyName>ASCOM.Meade.net.Telescope</AssemblyName>
     <FileUpgradeFlags>
     </FileUpgradeFlags>
     <UpgradeBackupLocation>
     </UpgradeBackupLocation>
     <OldToolsVersion>3.5</OldToolsVersion>
-    <TargetFrameworkVersion>v4.6.2</TargetFrameworkVersion>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
     <ApplicationIcon>ASCOM.ico</ApplicationIcon>
     <SignAssembly>true</SignAssembly>
     <AssemblyOriginatorKeyFile>ASCOMDriverTemplate.snk</AssemblyOriginatorKeyFile>
@@ -41,18 +41,18 @@
     <DebugSymbols>true</DebugSymbols>
     <DebugType>full</DebugType>
     <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
+    <OutputPath>..\bin\Debug\</OutputPath>
     <DefineConstants>DEBUG;TRACE</DefineConstants>
     <ErrorReport>prompt</ErrorReport>
     <WarningLevel>4</WarningLevel>
     <RegisterForComInterop>true</RegisterForComInterop>
-    <PlatformTarget>x64</PlatformTarget>
+    <PlatformTarget>x86</PlatformTarget>
     <Prefer32Bit>false</Prefer32Bit>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
     <DebugType>pdbonly</DebugType>
     <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
+    <OutputPath>..\bin\Release\</OutputPath>
     <DefineConstants>TRACE</DefineConstants>
     <ErrorReport>prompt</ErrorReport>
     <WarningLevel>4</WarningLevel>
@@ -60,16 +60,47 @@
     <RegisterForComInterop>false</RegisterForComInterop>
     <Prefer32Bit>false</Prefer32Bit>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <OutputPath>..\bin\Release\</OutputPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <OutputPath>..\bin\Debug\</OutputPath>
+    <PlatformTarget>x86</PlatformTarget>
+  </PropertyGroup>
   <ItemGroup>
-    <Reference Include="ASCOM.Astrometry, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.Attributes, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.Controls, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.DeviceInterfaces, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.Exceptions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.SettingsProvider, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="ASCOM.Utilities.Video, Version=6.1.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL" />
-    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="ASCOM.Astrometry, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Astrometry.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Attributes, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Attributes.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Cache, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Cache.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Controls, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Controls.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DeviceInterfaces, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DeviceInterfaces.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DriverAccess, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DriverAccess.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Exceptions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Exceptions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Internal.Extensions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Internal.Extensions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.SettingsProvider, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.SettingsProvider.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities.Video, Version=6.1.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.Video.dll</HintPath>
+    </Reference>
     <Reference Include="System" />
     <Reference Include="System.configuration" />
     <Reference Include="System.Configuration.Install" />
@@ -78,23 +109,18 @@
     </Reference>
     <Reference Include="System.Data" />
     <Reference Include="System.Drawing" />
-    <Reference Include="System.IO.Compression" />
-    <Reference Include="System.Runtime.Serialization" />
-    <Reference Include="System.ServiceModel" />
-    <Reference Include="System.Transactions" />
-    <Reference Include="System.Windows" />
     <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml" />
-    <Reference Include="WindowsBase" />
   </ItemGroup>
   <ItemGroup>
-    <Compile Include="AscomClasses\Telescope.cs" />
-    <Compile Include="Controller\FirmwareVersion.cs" />
-    <Compile Include="Controller\ISerialProcessor.cs" />
-    <Compile Include="Controller\ITelescopeController.cs" />
-    <Compile Include="Controller\SerialProcessor.cs" />
-    <Compile Include="Controller\TelescopeController.cs" />
+    <Compile Include="AstroMaths\AltitudeData.cs" />
+    <Compile Include="AstroMaths\AstroMaths.cs" />
+    <Compile Include="AstroMaths\EquatorialCoordinates.cs" />
+    <Compile Include="AstroMaths\HorizonCoordinates.cs" />
+    <Compile Include="AstroMaths\IAstroMaths.cs" />
+    <Compile Include="DoubleExtensions.cs" />
     <Compile Include="StringExtensions.cs" />
+    <Compile Include="Telescope.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
     <Compile Include="Properties\Resources.Designer.cs">
       <AutoGen>True</AutoGen>
@@ -106,13 +132,7 @@
       <DesignTimeSharedInput>True</DesignTimeSharedInput>
       <DependentUpon>Settings.settings</DependentUpon>
     </Compile>
-    <Compile Include="AscomClasses\Rates.cs" />
-    <Compile Include="AscomClasses\SetupDialogForm.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="AscomClasses\SetupDialogForm.designer.cs">
-      <DependentUpon>SetupDialogForm.cs</DependentUpon>
-    </Compile>
+    <Compile Include="Rates.cs" />
   </ItemGroup>
   <ItemGroup>
     <EmbeddedResource Include="Properties\Resources.resx">
@@ -120,15 +140,13 @@
       <Generator>ResXFileCodeGenerator</Generator>
       <LastGenOutput>Resources.Designer.cs</LastGenOutput>
     </EmbeddedResource>
-    <EmbeddedResource Include="AscomClasses\SetupDialogForm.resx">
-      <DependentUpon>SetupDialogForm.cs</DependentUpon>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
   </ItemGroup>
   <ItemGroup>
     <None Include="app.config" />
     <None Include="ASCOM.png" />
     <None Include="ASCOMDriverTemplate.snk" />
+    <None Include="BootstrapAscomProfileStore.ps1" />
+    <None Include="packages.config" />
     <None Include="Properties\Settings.settings">
       <Generator>SettingsSingleFileGenerator</Generator>
       <LastGenOutput>Settings.Designer.cs</LastGenOutput>
@@ -154,7 +172,12 @@
       <Install>true</Install>
     </BootstrapperPackage>
   </ItemGroup>
-  <ItemGroup />
+  <ItemGroup>
+    <ProjectReference Include="..\Meade.net\Meade.net.csproj">
+      <Project>{3689a2cb-94c5-4012-a5cf-7e7d1dd27143}</Project>
+      <Name>Meade.net</Name>
+    </ProjectReference>
+  </ItemGroup>
   <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
   <PropertyGroup>
     <PreBuildEvent>

Meade.net.Telescope/Meade.net.Telescope.v3.ncrunchproject

@@ -0,0 +1,5 @@
+<ProjectConfiguration>
+  <Settings>
+    <UseCPUArchitecture>x86</UseCPUArchitecture>
+  </Settings>
+</ProjectConfiguration>

Meade.net.Telescope/Properties/AssemblyInfo.cs

@@ -1,5 +1,4 @@
 using System.Reflection;
-using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;
 
 // General Information about an assembly is controlled through the following 
@@ -7,11 +6,11 @@ using System.Runtime.InteropServices;
 // associated with an assembly.
 //
 // TODO - Add your authorship information here
-[assembly: AssemblyTitle("ASCOM.MeadeAutostar497.Telescope")]
-[assembly: AssemblyDescription("ASCOM MeadeAutostar497 .net")]
+[assembly: AssemblyTitle("ASCOM.Meade.net.Telescope")]
+[assembly: AssemblyDescription("ASCOM Telescope driver for Meade.net")]
 [assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("Cjdawson.com")]
-[assembly: AssemblyProduct("ASCOM Telescope driver for MeadeAutostar497")]
+[assembly: AssemblyCompany("cjdawson.com")]
+[assembly: AssemblyProduct("ASCOM Telescope driver for Meade.net")]
 [assembly: AssemblyCopyright("Copyright © 2019 cjdawson.com")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
@@ -22,7 +21,7 @@ using System.Runtime.InteropServices;
 [assembly: ComVisible(true)]
 
 // The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("55d0f255-cb49-4e6b-bc32-4f8fb874734d")]
+[assembly: Guid("8b9fccb9-87ae-42f7-90af-079e13de6efb")]
 
 // Version information for an assembly consists of the following four values:
 //
@@ -35,5 +34,5 @@ using System.Runtime.InteropServices;
 // by using the '*' as shown below:
 //
 // TODO - Set your driver's version here
-[assembly: AssemblyVersion("0.2.0.0")]
-[assembly: AssemblyFileVersion("0.2.0.0")]
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]

Meade.net.Telescope/Properties/Resources.Designer.cs

@@ -8,7 +8,7 @@
 // </auto-generated>
 //------------------------------------------------------------------------------
 
-namespace ASCOM.MeadeAutostar497.Properties {
+namespace ASCOM.Meade.net.Properties {
     using System;
     
     
@@ -19,7 +19,7 @@ namespace ASCOM.MeadeAutostar497.Properties {
     // class via a tool like ResGen or Visual Studio.
     // To add or remove a member, edit your .ResX file then rerun ResGen
     // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "15.0.0.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "16.0.0.0")]
     [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
     internal class Resources {
@@ -39,7 +39,7 @@ namespace ASCOM.MeadeAutostar497.Properties {
         internal static global::System.Resources.ResourceManager ResourceManager {
             get {
                 if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ASCOM.MeadeAutostar497.Properties.Resources", typeof(Resources).Assembly);
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ASCOM.Meade.net.Properties.Resources", typeof(Resources).Assembly);
                     resourceMan = temp;
                 }
                 return resourceMan;

Meade.net.Telescope/Properties/Settings.Designer.cs

@@ -8,11 +8,11 @@
 // </auto-generated>
 //------------------------------------------------------------------------------
 
-namespace ASCOM.MeadeAutostar497.Properties {
+namespace ASCOM.Meade.net.Properties {
     
     
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.9.0.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "16.0.0.0")]
     internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
         
         private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));

Meade.net.Telescope/Rates.cs

@@ -1,30 +1,26 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Runtime.InteropServices;
+using System.Runtime.InteropServices;
 using ASCOM.DeviceInterface;
 using System.Collections;
 using System.Threading;
 
-namespace ASCOM.MeadeAutostar497
+namespace ASCOM.Meade.net
 {
     #region Rate class
     //
     // The Rate class implements IRate, and is used to hold values
     // for AxisRates. You do not need to change this class.
     //
-    // The Guid attribute sets the CLSID for ASCOM.MeadeAutostar497.Rate
+    // The Guid attribute sets the CLSID for ASCOM.Meade.net.Rate
     // The ClassInterface/None addribute prevents an empty interface called
     // _Rate from being created and used as the [default] interface
     //
-    [Guid("20c14d35-a61b-4c6a-a6ab-cb9f27997c45")]
+    [Guid("288838d1-bbf9-4ce0-9ee1-86ecf38b45c9")]
     [ClassInterface(ClassInterfaceType.None)]
     [ComVisible(true)]
-    public class Rate : ASCOM.DeviceInterface.IRate
+    public class Rate : IRate
     {
-        private double maximum = 0;
-        private double minimum = 0;
+        private double _maximum = 0;
+        private double _minimum = 0;
 
         //
         // Default constructor - Internal prevents public creation
@@ -32,8 +28,8 @@ namespace ASCOM.MeadeAutostar497
         //
         internal Rate(double minimum, double maximum)
         {
-            this.maximum = maximum;
-            this.minimum = minimum;
+            _maximum = maximum;
+            _minimum = minimum;
         }
 
         #region Implementation of IRate
@@ -45,14 +41,14 @@ namespace ASCOM.MeadeAutostar497
 
         public double Maximum
         {
-            get { return this.maximum; }
-            set { this.maximum = value; }
+            get => _maximum;
+            set => _maximum = value;
         }
 
         public double Minimum
         {
-            get { return this.minimum; }
-            set { this.minimum = value; }
+            get => _minimum;
+            set => _minimum = value;
         }
 
         #endregion
@@ -65,17 +61,17 @@ namespace ASCOM.MeadeAutostar497
     // both COM and .NET. The IAxisRates and IEnumerable interfaces provide
     // this polymorphism. 
     //
-    // The Guid attribute sets the CLSID for ASCOM.MeadeAutostar497.AxisRates
+    // The Guid attribute sets the CLSID for ASCOM.Meade.net.AxisRates
     // The ClassInterface/None addribute prevents an empty interface called
     // _AxisRates from being created and used as the [default] interface
     //
-    [Guid("ac703603-bcfc-4d98-9de3-c2b9a165756f")]
+    [Guid("436de2dd-a77a-41ad-8a9e-14c3695f18f2")]
     [ClassInterface(ClassInterfaceType.None)]
     [ComVisible(true)]
     public class AxisRates : IAxisRates, IEnumerable
     {
-        private TelescopeAxes axis;
-        private readonly Rate[] rates;
+        private TelescopeAxes _axis;
+        private readonly Rate[] _rates;
 
         //
         // Constructor - Internal prevents public creation
@@ -83,7 +79,7 @@ namespace ASCOM.MeadeAutostar497
         //
         internal AxisRates(TelescopeAxes axis)
         {
-            this.axis = axis;
+            _axis = axis;
             //
             // This collection must hold zero or more Rate objects describing the 
             // rates of motion ranges for the Telescope.MoveAxis() method
@@ -100,26 +96,23 @@ namespace ASCOM.MeadeAutostar497
                     // TODO Initialize this array with any Primary axis rates that your driver may provide
                     // Example: m_Rates = new Rate[] { new Rate(10.5, 30.2), new Rate(54.0, 43.6) }
                     //this.rates = new Rate[0];
-                    this.rates = new Rate[] {new Rate(1, 1), new Rate(2, 2), new Rate(3, 3), new Rate(4, 4)};
+                    _rates = new Rate[] { new Rate(1, 1), new Rate(2, 2), new Rate(3, 3), new Rate(4, 4) };
                     break;
                 case TelescopeAxes.axisSecondary:
                     // TODO Initialize this array with any Secondary axis rates that your driver may provide
                     //this.rates = new Rate[0];
-                    this.rates = new Rate[] { new Rate(1, 1), new Rate(2, 2), new Rate(3, 3), new Rate(4, 4) };
+                    _rates = new Rate[] { new Rate(1, 1), new Rate(2, 2), new Rate(3, 3), new Rate(4, 4) };
                     break;
                 case TelescopeAxes.axisTertiary:
                     // TODO Initialize this array with any Tertiary axis rates that your driver may provide
-                    this.rates = new Rate[0];
+                    _rates = new Rate[0];
                     break;
             }
         }
 
         #region IAxisRates Members
 
-        public int Count
-        {
-            get { return this.rates.Length; }
-        }
+        public int Count => _rates.Length;
 
         public void Dispose()
         {
@@ -128,13 +121,10 @@ namespace ASCOM.MeadeAutostar497
 
         public IEnumerator GetEnumerator()
         {
-            return rates.GetEnumerator();
+            return _rates.GetEnumerator();
         }
 
-        public IRate this[int index]
-        {
-            get { return this.rates[index - 1]; }	// 1-based
-        }
+        public IRate this[int index] => _rates[index - 1];
 
         #endregion
     }
@@ -146,7 +136,7 @@ namespace ASCOM.MeadeAutostar497
     // both COM and .NET. The ITrackingRates and IEnumerable interfaces provide
     // this polymorphism. 
     //
-    // The Guid attribute sets the CLSID for ASCOM.MeadeAutostar497.TrackingRates
+    // The Guid attribute sets the CLSID for ASCOM.Meade.net.TrackingRates
     // The ClassInterface/None addribute prevents an empty interface called
     // _TrackingRates from being created and used as the [default] interface
     //
@@ -154,16 +144,16 @@ namespace ASCOM.MeadeAutostar497
     // will work with this .NET 4.0 object.  Changes to this have proved to be challenging
     // and it is strongly suggested that it isn't changed.
     //
-    [Guid("cb732953-8e5a-4bf0-b3b7-451edb74b5d5")]
+    [Guid("8e9aa30e-ab24-4a20-8af3-4a057defb1ff")]
     [ClassInterface(ClassInterfaceType.None)]
     [ComVisible(true)]
     public class TrackingRates : ITrackingRates, IEnumerable, IEnumerator
     {
-        private readonly DriveRates[] trackingRates;
+        private readonly DriveRates[] _trackingRates;
 
         // this is used to make the index thread safe
-        private readonly ThreadLocal<int> pos = new ThreadLocal<int>(() => { return -1; });
-        private static readonly object lockObj = new object();
+        private readonly ThreadLocal<int> _pos = new ThreadLocal<int>(() => { return -1; });
+        private static readonly object LockObj = new object();
 
         //
         // Default constructor - Internal prevents public creation
@@ -176,20 +166,17 @@ namespace ASCOM.MeadeAutostar497
             // the tracking rates supported by your telescope. The one value
             // (tracking rate) that MUST be supported is driveSidereal!
             //
-            this.trackingRates = new[] { DriveRates.driveSidereal };
+            _trackingRates = new[] { DriveRates.driveSidereal, DriveRates.driveLunar };
             // TODO Initialize this array with any additional tracking rates that your driver may provide
         }
 
         #region ITrackingRates Members
 
-        public int Count
-        {
-            get { return this.trackingRates.Length; }
-        }
+        public int Count => _trackingRates.Length;
 
         public IEnumerator GetEnumerator()
         {
-            pos.Value = -1;
+            _pos.Value = -1;
             return this as IEnumerator;
         }
 
@@ -198,10 +185,7 @@ namespace ASCOM.MeadeAutostar497
             // TODO Add any required object cleanup here
         }
 
-        public DriveRates this[int index]
-        {
-            get { return this.trackingRates[index - 1]; }   // 1-based
-        }
+        public DriveRates this[int index] => _trackingRates[index - 1];
 
         #endregion
 
@@ -211,22 +195,22 @@ namespace ASCOM.MeadeAutostar497
         {
             get
             {
-                lock (lockObj)
+                lock (LockObj)
                 {
-                    if (pos.Value < 0 || pos.Value >= trackingRates.Length)
+                    if (_pos.Value < 0 || _pos.Value >= _trackingRates.Length)
                     {
                         throw new System.InvalidOperationException();
                     }
-                    return trackingRates[pos.Value];
+                    return _trackingRates[_pos.Value];
                 }
             }
         }
 
         public bool MoveNext()
         {
-            lock (lockObj)
+            lock (LockObj)
             {
-                if (++pos.Value >= trackingRates.Length)
+                if (++_pos.Value >= _trackingRates.Length)
                 {
                     return false;
                 }
@@ -236,7 +220,7 @@ namespace ASCOM.MeadeAutostar497
 
         public void Reset()
         {
-            pos.Value = -1;
+            _pos.Value = -1;
         }
         #endregion
     }

Meade.net.Telescope/StringExtensions.cs

@@ -0,0 +1,33 @@
+namespace ASCOM.Meade.net
+{
+    public static class StringExtensions
+    {
+        public static int ToInteger(this string str)
+        {
+            return int.Parse(str);
+        }
+
+        public static double ToDouble(this string str)
+        {
+            return double.Parse(str);
+        }
+
+        public static int Position(this string str, char find, int instance)
+        {
+            var currentInstance = 0;
+            for (var i = 0; i < str.Length; i++)
+            {
+                if (str[i] == find)
+                {
+                    currentInstance++;
+                    if (currentInstance == instance)
+                    {
+                        return i;
+                    }
+                }
+            }
+
+            return -1;
+        }
+    }
+}

Meade.net.Telescope/app.config

@@ -5,4 +5,4 @@
             <section name="ASCOM.DeviceName.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/>
         </sectionGroup>
     </configSections>
-<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.2"/></startup></configuration>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup></configuration>

Meade.net.Telescope/packages.config

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="ASCOM.Platform" version="6.4.2" targetFramework="net40" />
+</packages>

Meade.net.focuser/BootstrapAscomProfileStore.ps1

@@ -0,0 +1,36 @@
+<#
+This script initializes a bare minimum set of registry entries required for ASCOM.Utilities.Profile to work
+without throwing any exceptions. When building on a build server, or on a computer without the ASCOM Platform installed,
+it may be useful to execute this script as a build step prior to running any unit tests, or calling any code that relies on
+ASCOM.Utilities.Profile. The alternative is to install the ASCOM Platform on the build agent.
+
+NOTE: This script equires elevated permissions because it creates registry keys in the LocalMachine hive.
+#>
+
+$wow = Test-Path HKLM:\SOFTWARE\Wow6432Node
+if ($wow)
+    {
+    $root = "HKLM:\SOFTWARE\Wow6432Node"
+    }
+else
+    {
+    $root = "HKLM:\SOFTWARE"
+    }
+$ascomRoot = $root + "\ASCOM"
+
+if (Test-Path $ascomRoot) 
+    {
+    <# Don't upset an already-existing ASCOM registry #>
+    exit
+    }
+
+<# Create the ASCOM root key and set it's ACL to allow all users read/write access #>
+New-Item -Path $root -Name ASCOM –Force
+$ascomAcl = Get-Acl $ascomRoot
+$aclRule = New-Object System.Security.AccessControl.RegistryAccessRule ("Users","FullControl","Allow")
+$ascomAcl.SetAccessRule($aclRule)
+$ascomAcl | Set-Acl -Path $ascomRoot
+
+<# Now create the bare minimum keys required so that ASCOM.Utilities.Profile doesn't crash and burn #>
+New-ItemProperty -Path $ascomRoot -Name PlatformVersion -Value "6.1" -PropertyType String –Force
+New-ItemProperty -Path $ascomRoot -Name SerTraceFile -Value "C:\SerialTraceAuto.txt" -PropertyType String –Force

Meade.net.focuser/Focuser.cs

@@ -0,0 +1,601 @@
+#define Focuser
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+using ASCOM.Utilities;
+using ASCOM.DeviceInterface;
+using System.Globalization;
+using System.Collections;
+using System.Reflection;
+using ASCOM.Meade.net.Wrapper;
+using ASCOM.Utilities.Interfaces;
+
+namespace ASCOM.Meade.net
+{
+    //
+    // Your driver's DeviceID is ASCOM.Meade.net.Focuser
+    //
+    // The Guid attribute sets the CLSID for ASCOM.Meade.net.Focuser
+    // The ClassInterface/None addribute prevents an empty interface called
+    // _Meade.net from being created and used as the [default] interface
+    //
+    // TODO Replace the not implemented exceptions with code to implement the function or
+    // throw the appropriate ASCOM exception.
+    //
+
+    /// <summary>
+    /// ASCOM Focuser Driver for Meade.net.
+    /// </summary>
+    [Guid("a32ac647-bf0f-42f9-8ab0-d166fa5884ad")]
+    [ProgId("ASCOM.MeadeGeneric.focuser")]
+    [ServedClassName("Meade.net Focuser")]
+    [ClassInterface(ClassInterfaceType.None)]
+    public class Focuser : ReferenceCountedObjectBase, IFocuserV3
+    {
+        /// <summary>
+        /// ASCOM DeviceID (COM ProgID) for this driver.
+        /// The DeviceID is used by ASCOM applications to load the driver at runtime.
+        /// </summary>
+        //internal static string driverID = "ASCOM.Meade.net.Focuser";
+        private static readonly string DriverId = Marshal.GenerateProgIdForType(MethodBase.GetCurrentMethod().DeclaringType);
+        // TODO Change the descriptive string for your driver then remove this line
+        /// <summary>
+        /// Driver description that displays in the ASCOM Chooser.
+        /// </summary>
+        private static readonly string DriverDescription = "Meade Generic";
+
+        private static string _comPort; // Variables to hold the currrent device configuration
+
+        /// <summary>
+        /// Private variable to hold an ASCOM Utilities object
+        /// </summary>
+        private readonly IUtil _utilities;
+
+        /// <summary>
+        /// Variable to hold the trace logger object (creates a diagnostic log file with information that you specify)
+        /// </summary>
+        internal static TraceLogger Tl;
+
+        private readonly ISharedResourcesWrapper _sharedResourcesWrapper;
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="Meade.net"/> class.
+        /// Must be public for COM registration.
+        /// </summary>
+        public Focuser()
+        {
+            //todo move this out to IOC
+            _utilities = new Util(); //Initialise util object
+            _sharedResourcesWrapper = new SharedResourcesWrapper();
+
+            Initialise();
+        }
+
+        private void Initialise()
+        {
+            //todo move the TraceLogger out to a factory class.
+            Tl = new TraceLogger("", "Meade.Generic.focusser");
+
+            ReadProfile(); // Read device configuration from the ASCOM Profile store
+
+            IsConnected = false; // Initialise connected to false
+
+            LogMessage("Focuser", "Completed initialisation");
+            LogMessage("Focuser", $"Driver version: {DriverVersion}");
+        }
+
+
+        //
+        // PUBLIC COM INTERFACE IFocuserV3 IMPLEMENTATION
+        //
+
+        #region Common properties and methods.
+
+        /// <summary>
+        /// Displays the Setup Dialog form.
+        /// If the user clicks the OK button to dismiss the form, then
+        /// the new settings are saved, otherwise the old values are reloaded.
+        /// THIS IS THE ONLY PLACE WHERE SHOWING USER INTERFACE IS ALLOWED!
+        /// </summary>
+        public void SetupDialog()
+        {
+            Tl.LogMessage("SetupDialog", "Opening setup dialog");
+            _sharedResourcesWrapper.SetupDialog();
+            ReadProfile();
+            Tl.LogMessage("SetupDialog", "complete");
+        }
+
+        public ArrayList SupportedActions
+        {
+            get
+            {
+                Tl.LogMessage("SupportedActions Get", "Returning empty arraylist");
+                return new ArrayList();
+            }
+        }
+
+        public string Action(string actionName, string actionParameters)
+        {
+            LogMessage("", "Action {0}, parameters {1} not implemented", actionName, actionParameters);
+            throw new ActionNotImplementedException("Action " + actionName + " is not implemented by this driver");
+        }
+
+        public void CommandBlind(string command, bool raw)
+        {
+            CheckConnected("CommandBlind");
+            // Call CommandString and return as soon as it finishes
+            //this.CommandString(command, raw);
+            _sharedResourcesWrapper.SendBlind(command);
+            // or
+            //throw new ASCOM.MethodNotImplementedException("CommandBlind");
+            // DO NOT have both these sections!  One or the other
+        }
+
+        public bool CommandBool(string command, bool raw)
+        {
+            CheckConnected("CommandBool");
+            //string ret = CommandString(command, raw);
+            // TODO decode the return string and return true or false
+            // or
+            throw new MethodNotImplementedException("CommandBool");
+            // DO NOT have both these sections!  One or the other
+        }
+
+        public string CommandString(string command, bool raw)
+        {
+            CheckConnected("CommandString");
+            // it's a good idea to put all the low level communication with the device here,
+            // then all communication calls this function
+            // you need something to ensure that only one command is in progress at a time
+            return _sharedResourcesWrapper.SendString(command);
+
+            throw new MethodNotImplementedException("CommandString");
+        }
+
+        public void Dispose()
+        {
+            // Clean up the tracelogger and util objects
+            Tl.Enabled = false;
+            Tl.Dispose();
+            Tl = null;
+        }
+
+        public bool Connected
+        {
+            get
+            {
+                LogMessage("Connected", "Get {0}", IsConnected);
+                return IsConnected;
+            }
+            set
+            {
+                Tl.LogMessage("Connected", "Set {0}", value);
+                if (value == IsConnected)
+                    return;
+
+                if (value)
+                {
+                    try
+                    {
+                        ReadProfile();
+                        _sharedResourcesWrapper.Connect("Serial");
+                        try
+                        {
+                            SelectSite(1);
+                            SetLongFormat(true);
+
+                            IsConnected = true;
+                        }
+                        catch (Exception)
+                        {
+                            _sharedResourcesWrapper.Disconnect("Serial");
+                            throw;
+                        }
+                    }
+                    catch (Exception ex)
+                    {
+                        LogMessage("Connected Set", "Error connecting to port {0} - {1}", _comPort, ex.Message);
+                    }
+                }
+                else
+                {
+                    LogMessage("Connected Set", "Disconnecting from port {0}", _comPort);
+                    _sharedResourcesWrapper.Disconnect("Serial");
+                    IsConnected = false;
+                }
+            }
+        }
+
+        private void SetLongFormat(bool setLongFormat)
+        {
+            _sharedResourcesWrapper.Lock(() =>
+            {
+                var result = _sharedResourcesWrapper.SendString(":GZ#");
+                //:GZ# Get telescope azimuth
+                //Returns: DDD*MM#T or DDD*MM’SS#
+                //The current telescope Azimuth depending on the selected precision.
+
+                bool isLongFormat = result.Length > 6;
+
+                if (isLongFormat != setLongFormat)
+                {
+                    _utilities.WaitForMilliseconds(500);
+                    _sharedResourcesWrapper.SendBlind(":U#");
+                    //:U# Toggle between low/hi precision positions
+                    //Low - RA displays and messages HH:MM.T sDD*MM
+                    //High - Dec / Az / El displays and messages HH:MM: SS sDD*MM:SS
+                    //    Returns Nothing
+                }
+            });
+        }
+
+        private void SelectSite(int site)
+        {
+            _sharedResourcesWrapper.SendBlind($":W{site}#");
+            //:W<n>#
+            //Set current site to<n>, an ASCII digit in the range 1..4
+            //Returns: Nothing
+        }
+
+        public string Description
+        {
+            // TODO customise this device description
+            get
+            {
+                Tl.LogMessage("Description Get", DriverDescription);
+                return DriverDescription;
+            }
+        }
+
+        public string DriverInfo
+        {
+            get
+            {
+                Version version = Assembly.GetExecutingAssembly().GetName().Version;
+                // TODO customise this driver description
+                string driverInfo = "Information about the driver itself. Version: " + String.Format(CultureInfo.InvariantCulture, "{0}.{1}", version.Major, version.Minor);
+                Tl.LogMessage("DriverInfo Get", driverInfo);
+                return driverInfo;
+            }
+        }
+
+        public string DriverVersion
+        {
+            get
+            {
+                Version version = Assembly.GetExecutingAssembly().GetName().Version;
+                string driverVersion = String.Format(CultureInfo.InvariantCulture, "{0}.{1}", version.Major, version.Minor);
+                Tl.LogMessage("DriverVersion Get", driverVersion);
+                return driverVersion;
+            }
+        }
+
+        public short InterfaceVersion
+        {
+            // set by the driver wizard
+            get
+            {
+                LogMessage("InterfaceVersion Get", "3");
+                return Convert.ToInt16("3");
+            }
+        }
+
+        public string Name
+        {
+            get
+            {
+                //string name = "Short driver name - please customise";
+                string name = DriverDescription;
+                Tl.LogMessage("Name Get", name);
+                return name;
+            }
+        }
+
+        #endregion
+
+        #region IFocuser Implementation
+
+        public bool Absolute
+        {
+            get
+            {
+                Tl.LogMessage("Absolute Get", false.ToString());
+                return false; // This is a relative focuser
+            }
+        }
+
+        public void Halt()
+        {
+            Tl.LogMessage("Halt", "Halting");
+
+            CheckConnected("Halt");
+
+            //A single halt command is sometimes missed by the #909 apm, so let's do it a few times to be safe.
+            Stopwatch stopwatch = Stopwatch.StartNew();
+            while (stopwatch.ElapsedMilliseconds < 1000)
+            {
+                _sharedResourcesWrapper.SendBlind(":FQ#");
+                //:FQ# Halt Focuser Motion
+                //Returns: Nothing
+
+                _utilities.WaitForMilliseconds(250);
+            }
+        }
+
+        public bool IsMoving
+        {
+            get
+            {
+                Tl.LogMessage("IsMoving Get", false.ToString());
+                return false; // This focuser always moves instantaneously so no need for IsMoving ever to be True
+            }
+        }
+
+        public bool Link
+        {
+            get
+            {
+                Tl.LogMessage("Link Get", Connected.ToString());
+                return Connected; // Direct function to the connected method, the Link method is just here for backwards compatibility
+            }
+            set
+            {
+                Tl.LogMessage("Link Set", value.ToString());
+                Connected = value; // Direct function to the connected method, the Link method is just here for backwards compatibility
+            }
+        }
+
+        private readonly int _maxIncrement = 7000;
+        public int MaxIncrement
+        {
+            get
+            {
+                Tl.LogMessage("MaxIncrement Get", _maxIncrement.ToString());
+                return _maxIncrement; // Maximum change in one move
+            }
+        }
+
+        private readonly int _maxStep = 7000;
+        public int MaxStep
+        {
+            get
+            {
+                Tl.LogMessage("MaxStep Get", _maxStep.ToString());
+                return _maxStep;
+            }
+        }
+
+        public void Move(int position)
+        {
+            Tl.LogMessage("Move", position.ToString());
+            CheckConnected("Move");
+
+            //todo implement backlash compensation
+            //todo implement direction reverse
+            //todo implement dynamic braking
+
+            if (position < -MaxIncrement || position > MaxIncrement)
+            {
+                throw new InvalidValueException($"position out of range {-MaxIncrement} < {position} < {MaxIncrement}");
+            }
+
+            if (position == 0)
+                return;
+
+            if (position > 0)
+            {
+                //desired move direction is out
+                MoveFocuser(true, Math.Abs(position));
+            }
+            else
+            {
+                //desired move direction is in
+                MoveFocuser(false, Math.Abs(position));
+            }
+        }
+
+        private void MoveFocuser(bool directionOut, int steps)
+        {
+            _sharedResourcesWrapper.Lock(() =>
+            {
+                //_sharedResourcesWrapper.SendBlind(":FF#");
+                //:FF# Set Focus speed to fastest setting
+                //Returns: Nothing
+
+                //:FS# Set Focus speed to slowest setting
+                //Returns: Nothing
+
+                //:F<n># Autostar, Autostar II – set focuser speed to <n> where <n> is an ASCII digit 1..4
+                //Returns: Nothing
+                //All others – Not Supported
+                _utilities.WaitForMilliseconds(100);
+
+                //A Single focus command sometimes gets lost on the #909, so sending lots of them solves the issue.
+                Stopwatch stopwatch = Stopwatch.StartNew();
+                while (stopwatch.ElapsedMilliseconds < steps)
+                {
+                    _sharedResourcesWrapper.SendBlind(directionOut ? ":F+#" : ":F-#");
+                    //:F+# Start Focuser moving inward (toward objective)
+                    //Returns: None
+
+                    //:F-# Start Focuser moving outward (away from objective)
+                    //Returns: None
+
+                    _utilities.WaitForMilliseconds(250);
+                }
+
+                Halt();
+
+                //This gives the focuser time to physically stop.
+                _utilities.WaitForMilliseconds(1000);
+            });
+        }
+
+        public int Position => throw new PropertyNotImplementedException("Position", false);
+
+        public double StepSize
+        {
+            get
+            {
+                Tl.LogMessage("StepSize Get", "Not implemented");
+                throw new PropertyNotImplementedException("StepSize", false);
+            }
+        }
+
+        public bool TempComp
+        {
+            get
+            {
+                Tl.LogMessage("TempComp Get", false.ToString());
+                return false;
+            }
+            set
+            {
+                Tl.LogMessage("TempComp Set", "Not implemented");
+                throw new PropertyNotImplementedException("TempComp", false);
+            }
+        }
+
+        public bool TempCompAvailable
+        {
+            get
+            {
+                Tl.LogMessage("TempCompAvailable Get", false.ToString());
+                return false; // Temperature compensation is not available in this driver
+            }
+        }
+
+        public double Temperature
+        {
+            get
+            {
+                Tl.LogMessage("Temperature Get", "Not implemented");
+                throw new PropertyNotImplementedException("Temperature", false);
+            }
+        }
+
+        #endregion
+
+        #region Private properties and methods
+        // here are some useful properties and methods that can be used as required
+        // to help with driver development
+
+        #region ASCOM Registration
+
+        // Register or unregister driver for ASCOM. This is harmless if already
+        // registered or unregistered. 
+        //
+        /// <summary>
+        /// Register or unregister the driver with the ASCOM Platform.
+        /// This is harmless if the driver is already registered/unregistered.
+        /// </summary>
+        /// <param name="bRegister">If <c>true</c>, registers the driver, otherwise unregisters it.</param>
+        private static void RegUnregAscom(bool bRegister)
+        {
+            using (var p = new Profile())
+            {
+                p.DeviceType = "Focuser";
+                if (bRegister)
+                {
+                    p.Register(DriverId, DriverDescription);
+                }
+                else
+                {
+                    p.Unregister(DriverId);
+                }
+            }
+        }
+
+        /// <summary>
+        /// This function registers the driver with the ASCOM Chooser and
+        /// is called automatically whenever this class is registered for COM Interop.
+        /// </summary>
+        /// <param name="t">Type of the class being registered, not used.</param>
+        /// <remarks>
+        /// This method typically runs in two distinct situations:
+        /// <list type="numbered">
+        /// <item>
+        /// In Visual Studio, when the project is successfully built.
+        /// For this to work correctly, the option <c>Register for COM Interop</c>
+        /// must be enabled in the project settings.
+        /// </item>
+        /// <item>During setup, when the installer registers the assembly for COM Interop.</item>
+        /// </list>
+        /// This technique should mean that it is never necessary to manually register a driver with ASCOM.
+        /// </remarks>
+        [ComRegisterFunction]
+        public static void RegisterAscom(Type t)
+        {
+            RegUnregAscom(true);
+        }
+
+        /// <summary>
+        /// This function unregisters the driver from the ASCOM Chooser and
+        /// is called automatically whenever this class is unregistered from COM Interop.
+        /// </summary>
+        /// <param name="t">Type of the class being registered, not used.</param>
+        /// <remarks>
+        /// This method typically runs in two distinct situations:
+        /// <list type="numbered">
+        /// <item>
+        /// In Visual Studio, when the project is cleaned or prior to rebuilding.
+        /// For this to work correctly, the option <c>Register for COM Interop</c>
+        /// must be enabled in the project settings.
+        /// </item>
+        /// <item>During uninstall, when the installer unregisters the assembly from COM Interop.</item>
+        /// </list>
+        /// This technique should mean that it is never necessary to manually unregister a driver from ASCOM.
+        /// </remarks>
+        [ComUnregisterFunction]
+        public static void UnregisterAscom(Type t)
+        {
+            RegUnregAscom(false);
+        }
+
+        #endregion
+
+        /// <summary>
+        /// Returns true if there is a valid connection to the driver hardware
+        /// </summary>
+        private bool IsConnected { get; set; }
+
+        /// <summary>
+        /// Use this function to throw an exception if we aren't connected to the hardware
+        /// </summary>
+        /// <param name="message"></param>
+        private void CheckConnected(string message)
+        {
+            if (!IsConnected)
+            {
+                throw new NotConnectedException(message);
+            }
+        }
+
+        /// <summary>
+        /// Read the device configuration from the ASCOM Profile store
+        /// </summary>
+        internal void ReadProfile()
+        {
+            var profileProperties = _sharedResourcesWrapper.ReadProfile();
+            Tl.Enabled = profileProperties.TraceLogger;
+            _comPort = profileProperties.ComPort;
+
+            LogMessage("ReadProfile", $"Trace logger enabled: {Tl.Enabled}");
+            LogMessage("ReadProfile", $"Com Port: {_comPort}");
+        }
+
+        /// <summary>
+        /// Log helper function that takes formatted strings and arguments
+        /// </summary>
+        /// <param name="identifier"></param>
+        /// <param name="message"></param>
+        /// <param name="args"></param>
+        internal static void LogMessage(string identifier, string message, params object[] args)
+        {
+            var msg = string.Format(message, args);
+            Tl.LogMessage(identifier, msg);
+        }
+        #endregion
+    }
+}

Meade.net.focuser/Meade.net.focuser.csproj

@@ -0,0 +1,197 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="12.0">
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProductVersion>9.0.30729</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{A97E3AEC-F11D-49DA-B259-DE99DA813A86}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>ASCOM.Meade.net</RootNamespace>
+    <AssemblyName>ASCOM.Meade.net.Focuser</AssemblyName>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+    <OldToolsVersion>3.5</OldToolsVersion>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <ApplicationIcon>ASCOM.ico</ApplicationIcon>
+    <SignAssembly>true</SignAssembly>
+    <AssemblyOriginatorKeyFile>ASCOMDriverTemplate.snk</AssemblyOriginatorKeyFile>
+    <PublishUrl>publish\</PublishUrl>
+    <Install>true</Install>
+    <InstallFrom>Disk</InstallFrom>
+    <UpdateEnabled>false</UpdateEnabled>
+    <UpdateMode>Foreground</UpdateMode>
+    <UpdateInterval>7</UpdateInterval>
+    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+    <UpdatePeriodically>false</UpdatePeriodically>
+    <UpdateRequired>false</UpdateRequired>
+    <MapFileExtensions>true</MapFileExtensions>
+    <ApplicationRevision>0</ApplicationRevision>
+    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+    <IsWebBootstrapper>false</IsWebBootstrapper>
+    <UseApplicationTrust>false</UseApplicationTrust>
+    <BootstrapperEnabled>true</BootstrapperEnabled>
+    <TargetFrameworkProfile>
+    </TargetFrameworkProfile>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>..\bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <RegisterForComInterop>true</RegisterForComInterop>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>..\bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>..\bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <RegisterForComInterop>true</RegisterForComInterop>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <OutputPath>..\bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <Optimize>true</Optimize>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="ASCOM.Astrometry, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Astrometry.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Attributes, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Attributes.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Cache, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Cache.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Controls, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Controls.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DeviceInterfaces, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DeviceInterfaces.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DriverAccess, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DriverAccess.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Exceptions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Exceptions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Internal.Extensions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Internal.Extensions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.SettingsProvider, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.SettingsProvider.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities.Video, Version=6.1.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.Video.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.configuration" />
+    <Reference Include="System.Configuration.Install" />
+    <Reference Include="System.Core">
+      <RequiredTargetFramework>3.5</RequiredTargetFramework>
+    </Reference>
+    <Reference Include="System.Data" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Focuser.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+      <DependentUpon>Settings.settings</DependentUpon>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <SubType>Designer</SubType>
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+    </EmbeddedResource>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="app.config" />
+    <None Include="ASCOM.png" />
+    <None Include="ASCOMDriverTemplate.snk" />
+    <None Include="BootstrapAscomProfileStore.ps1" />
+    <None Include="packages.config" />
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <Content Include="ASCOM.ico" />
+    <Content Include="ReadMe.htm" />
+    <None Include="Resources\ASCOM.bmp" />
+  </ItemGroup>
+  <ItemGroup>
+    <BootstrapperPackage Include="Microsoft.Net.Client.3.5">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1 Client Profile</ProductName>
+      <Install>false</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Windows.Installer.3.1">
+      <Visible>False</Visible>
+      <ProductName>Windows Installer 3.1</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Meade.net\Meade.net.csproj">
+      <Project>{3689a2cb-94c5-4012-a5cf-7e7d1dd27143}</Project>
+      <Name>Meade.net</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+  </PropertyGroup>
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>

Meade.net.focuser/Meade.net.focuser.v3.ncrunchproject

@@ -0,0 +1,5 @@
+<ProjectConfiguration>
+  <Settings>
+    <UseCPUArchitecture>x86</UseCPUArchitecture>
+  </Settings>
+</ProjectConfiguration>

Meade.net.focuser/Properties/AssemblyInfo.cs

@@ -0,0 +1,38 @@
+using System.Reflection;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+// TODO - Add your authorship information here
+[assembly: AssemblyTitle("ASCOM.Meade.net.Focuser")]
+[assembly: AssemblyDescription("ASCOM Focuser driver for Meade.net")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("cjdawson.com")]
+[assembly: AssemblyProduct("ASCOM Focuser driver for Meade.net")]
+[assembly: AssemblyCopyright("Copyright © 2019 cjdawson.com")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(true)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("4ad7a6d4-6d54-4a9a-bbf3-895353e318f8")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+//
+// TODO - Set your driver's version here
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]

Meade.net.focuser/Properties/Resources.Designer.cs

@@ -0,0 +1,83 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ASCOM.Meade.net.Properties {
+    using System;
+    
+    
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "16.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources {
+        
+        private static global::System.Resources.ResourceManager resourceMan;
+        
+        private static global::System.Globalization.CultureInfo resourceCulture;
+        
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources() {
+        }
+        
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager {
+            get {
+                if (object.ReferenceEquals(resourceMan, null)) {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ASCOM.Meade.net.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+        
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture {
+            get {
+                return resourceCulture;
+            }
+            set {
+                resourceCulture = value;
+            }
+        }
+        
+        /// <summary>
+        ///   Looks up a localized resource of type System.Drawing.Bitmap.
+        /// </summary>
+        internal static System.Drawing.Bitmap ASCOM {
+            get {
+                object obj = ResourceManager.GetObject("ASCOM", resourceCulture);
+                return ((System.Drawing.Bitmap)(obj));
+            }
+        }
+        
+        /// <summary>
+        ///   Looks up a localized resource of type System.Drawing.Icon similar to (Icon).
+        /// </summary>
+        internal static System.Drawing.Icon DefaultIcon {
+            get {
+                object obj = ResourceManager.GetObject("DefaultIcon", resourceCulture);
+                return ((System.Drawing.Icon)(obj));
+            }
+        }
+    }
+}

Meade.net.focuser/Properties/Resources.resx

@@ -0,0 +1,127 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <assembly alias="System.Windows.Forms" name="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
+  <data name="ASCOM" type="System.Resources.ResXFileRef, System.Windows.Forms">
+    <value>..\ASCOM.png;System.Drawing.Bitmap, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</value>
+  </data>
+  <data name="DefaultIcon" type="System.Resources.ResXFileRef, System.Windows.Forms">
+    <value>..\ASCOM.ico;System.Drawing.Icon, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</value>
+  </data>
+</root>

Meade.net.focuser/Properties/Settings.Designer.cs

@@ -0,0 +1,26 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ASCOM.Meade.net.Properties {
+    
+    
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "16.0.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
+        
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+        
+        public static Settings Default {
+            get {
+                return defaultInstance;
+            }
+        }
+    }
+}

Meade.net.focuser/Properties/Settings.settings

@@ -0,0 +1,5 @@
+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
+  <Profiles />
+  <Settings />
+</SettingsFile>

Meade.net.focuser/ReadMe.htm

@@ -0,0 +1,147 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
+<HTML>
+<HEAD>
+	<META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=windows-1252">
+	<TITLE>Untitled Document</TITLE>
+	<META NAME="GENERATOR" CONTENT="OpenOffice.org 3.2  (Win32)">
+	<META NAME="CREATED" CONTENT="0;0">
+	<META NAME="CHANGEDBY" CONTENT="Chris Rowland">
+	<META NAME="CHANGED" CONTENT="20110918;14150500">
+	<STYLE TYPE="text/css">
+	<!--
+		@page { margin: 2cm }
+		P { font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal }
+		TD P { font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal }
+		H3 { font-family: "Arial", "Helvetica", sans-serif }
+		H2 { font-family: "Arial", "Helvetica", sans-serif }
+		H4 { font-family: "Arial", "Helvetica", sans-serif }
+		TD P.note { background: #33ffff; font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal }
+		TD P.underline { font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal; text-decoration: underline }
+	-->
+	</STYLE>
+</HEAD>
+<BODY LANG="en-GB" DIR="LTR">
+<TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
+	<TR>
+		<TD>
+			<H2>ASCOM Focuser Driver (C#)</H2>
+		</TD>
+	</TR>
+</TABLE>
+<P><BR><BR>
+</P>
+<H4>You have just created the skeleton of an ASCOM
+Focuser driver in C#. It produces an in-process
+(assembly) based driver.</H4>
+<HR>
+<P CLASS="note">Prior to developing your first driver, please
+familiarize yourself with the <A HREF="http://ascom-standards.org/developer.html">developer
+information we've provided</A> at the ASCOM Initiative web site
+(internet required). 
+</P>
+<P CLASS="underline">You must do the following in order to complete
+your implementation:</P>
+<OL>
+	<LI><P STYLE="margin-bottom: 0cm">Switch to the Debug configuration
+	and build the template now. It should build without errors. 
+	</P>
+	<LI><P STYLE="margin-bottom: 0cm">Add a test project to the
+	solution. There are templates that can be used to add either a
+	console or a Windows Forms application:</P>
+</OL>
+<UL>
+	<LI><P STYLE="margin-bottom: 0cm">Select the <FONT FACE="Consolas, monospace">ASCOM
+	Test Forms App (CS)</FONT> or <FONT FACE="Consolas, monospace">ASCOM
+	Test Console App (CS)</FONT> template.</P>
+	<LI><P STYLE="margin-bottom: 0cm">Set a name for the test
+	application and click on OK.</P>
+	<LI><P STYLE="margin-bottom: 0cm">In the Wizard: set the same device
+	type and model name as for the driver and select Create to build the
+	test project.</P>
+	<LI><P STYLE="margin-bottom: 0cm">Set the Test Application to Run at
+	Startup.</P>
+	<LI><P STYLE="margin-bottom: 0cm">Click on Debug and the test
+	application should run.  You should be able to select your
+	application in the chooser. Selecting Properties should show the
+	default setup dialog for your driver.</P>
+	<LI><P STYLE="margin-bottom: 0cm">Trying to continue will generate
+	errors because the additional properties have not been implemented.</P>
+</UL>
+<OL START=4>
+	<LI><P STYLE="margin-bottom: 0cm">Go through the Driver.cs file and
+	replace the System.NotImplemented exceptions with code to implement
+	your driver's functionality. See the ASCOM IFocuserV3
+	spec.  If a property or method is not implemented in your driver the
+	System.NotImplemented exception must be replaced by an
+	ASCOM.PropertyNotImplemented or ASCOM.MethodNotImplemented
+	exception.</P>
+	<LI><P>Customize the Setup Dialog (SetupDialogForm) to provide the
+	settings and other controls for your driver. You can bind settings
+	directly to controls on your dialog form, there's no need to manage
+	settings manually. A custom Settings class takes care of managing
+	your settings behind the scenes. 
+	</P>
+</OL>
+<H3>Notes:</H3>
+<UL>
+	<LI><P STYLE="margin-bottom: 0cm">Successfully building the driver,
+	as well as using <FONT FACE="Lucida Console, Courier New, Courier, monospace">regasm</FONT>
+	on the assembly, registers it for both COM and ASCOM (the Chooser).
+	See the code in the ASCOM Registration region of Driver.vb. 
+	</P>
+	<LI><P STYLE="margin-bottom: 0cm">Doing a Clean for the project, as
+	well doing a <FONT FACE="Lucida Console, Courier New, Courier, monospace">regasm
+	-u</FONT> on the assembly, unregisters it for both COM and ASCOM
+	(the Chooser). 
+	</P>
+	<LI><P>Place a breakpoint in your driver class constructor, then
+	start debugging (go, F5). Your breakpoint will be hit when the test
+	application creates an instance of your driver (after selecting it
+	in the Chooser). You can now single step, examine variables, etc.
+	Please review the test application and make changes and additions to
+	activate various parts of your driver during debugging.</P>
+	<LI><P>The project's Debug configuration is already configured (The
+	test application creates an instance of your driver (after selecting
+	it in the Chooser). You can now single step, examine variables, etc.
+	Please review the test application and feel free to make changes and
+	additions to activate various parts of your driver during debugging.
+		</P>
+</UL>
+<DIV ALIGN=RIGHT>
+	<TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
+		<TR>
+			<TD>
+				<TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
+					<TR>
+						<TD>
+							<H3>ASCOM Initiative</H3>
+						</TD>
+						<TD>
+							<IMG SRC="ASCOM.png" NAME="graphics1" ALIGN=RIGHT WIDTH=48 HEIGHT=56 BORDER=0></TD>
+					</TR>
+				</TABLE>
+				<P><BR><BR>
+				</P>
+			</TD>
+		</TR>
+		<TR>
+			<TD>
+				<P>The ASCOM Initiative consists of a group of astronomy software
+				developers and instrument vendors whose goals are to promote the
+				driver/client model and scripting automation. 
+				</P>
+				<P>See the <A HREF="http://ascom-standards.org/" TARGET="browser">ASCOM
+				web site</A> for more information. Please participate in the
+				<A HREF="http://tech.groups.yahoo.com/group/ASCOM-Talk" TARGET="browser">ASCOM-Talk
+				Yahoo Group</A>. 
+				</P>
+			</TD>
+		</TR>
+	</TABLE>
+</DIV>
+<P><BR><BR>
+</P><P>
+<BR><BR>
+</P>
+</BODY>
+</HTML>

Meade.net.focuser/app.config

@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<configuration>
+    <configSections>
+        <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+            <section name="ASCOM.DeviceName.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/>
+        </sectionGroup>
+    </configSections>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup></configuration>

Meade.net.focuser/packages.config

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="ASCOM.Platform" version="6.4.2" targetFramework="net40" />
+</packages>

Meade.net.sln

@@ -0,0 +1,136 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.28803.452
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Meade.net", "Meade.net\Meade.net.csproj", "{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Meade.net.Telescope", "Meade.net.Telescope\Meade.net.Telescope.csproj", "{64308775-BD4A-469C-BCAB-3ED830B811AF}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Meade.net.focuser", "Meade.net.focuser\Meade.net.focuser.csproj", "{A97E3AEC-F11D-49DA-B259-DE99DA813A86}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TelescopeTestConsole", "TelescopeTestConsole\TelescopeTestConsole.csproj", "{D5207217-61C7-4E94-8097-91DBACE57D2A}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "FocuserTestConsole", "FocuserTestConsole\FocuserTestConsole.csproj", "{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "TestConsoles", "TestConsoles", "{BF650D97-AF98-4638-9C55-21311C6D88DA}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "UnitTests", "UnitTests", "{0958D817-269C-44BE-BEFB-F3E6A409DE91}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "AstroMath.UnitTests", "AstroMath.UnitTests\AstroMath.UnitTests.csproj", "{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}"
+EndProject
+Project("{930C7802-8A8C-48F9-8165-68863BCCD9DD}") = "Meade.net.Setup", "Meade.net.Setup\Meade.net.Setup.wixproj", "{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Meade.net.Telescope.UnitTests", "Meade.net.Telescope.UnitTests\Meade.net.Telescope.UnitTests.csproj", "{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Debug|x64 = Debug|x64
+		Debug|x86 = Debug|x86
+		Release|Any CPU = Release|Any CPU
+		Release|x64 = Release|x64
+		Release|x86 = Release|x86
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|x64.ActiveCfg = Debug|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|x64.Build.0 = Debug|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|x86.ActiveCfg = Debug|x86
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Debug|x86.Build.0 = Debug|x86
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|Any CPU.Build.0 = Release|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|x64.ActiveCfg = Release|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|x64.Build.0 = Release|Any CPU
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|x86.ActiveCfg = Release|x86
+		{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}.Release|x86.Build.0 = Release|x86
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|x64.ActiveCfg = Debug|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|x64.Build.0 = Debug|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|x86.ActiveCfg = Debug|x86
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Debug|x86.Build.0 = Debug|x86
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|Any CPU.Build.0 = Release|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|x64.ActiveCfg = Release|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|x64.Build.0 = Release|Any CPU
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|x86.ActiveCfg = Release|x86
+		{64308775-BD4A-469C-BCAB-3ED830B811AF}.Release|x86.Build.0 = Release|x86
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|x64.ActiveCfg = Debug|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|x64.Build.0 = Debug|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|x86.ActiveCfg = Debug|x86
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Debug|x86.Build.0 = Debug|x86
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|Any CPU.Build.0 = Release|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|x64.ActiveCfg = Release|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|x64.Build.0 = Release|Any CPU
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|x86.ActiveCfg = Release|x86
+		{A97E3AEC-F11D-49DA-B259-DE99DA813A86}.Release|x86.Build.0 = Release|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Debug|Any CPU.ActiveCfg = Debug|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Debug|x64.ActiveCfg = Debug|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Debug|x64.Build.0 = Debug|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Debug|x86.ActiveCfg = Debug|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Debug|x86.Build.0 = Debug|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Release|Any CPU.ActiveCfg = Release|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Release|x64.ActiveCfg = Release|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Release|x86.ActiveCfg = Release|x86
+		{D5207217-61C7-4E94-8097-91DBACE57D2A}.Release|x86.Build.0 = Release|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Debug|Any CPU.ActiveCfg = Debug|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Debug|x64.ActiveCfg = Debug|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Debug|x64.Build.0 = Debug|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Debug|x86.ActiveCfg = Debug|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Debug|x86.Build.0 = Debug|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Release|Any CPU.ActiveCfg = Release|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Release|x64.ActiveCfg = Release|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Release|x86.ActiveCfg = Release|x86
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49}.Release|x86.Build.0 = Release|x86
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|x64.ActiveCfg = Debug|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|x64.Build.0 = Debug|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|x86.ActiveCfg = Debug|x86
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Debug|x86.Build.0 = Debug|x86
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|Any CPU.Build.0 = Release|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|x64.ActiveCfg = Release|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|x64.Build.0 = Release|Any CPU
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|x86.ActiveCfg = Release|x86
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95}.Release|x86.Build.0 = Release|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Debug|Any CPU.ActiveCfg = Debug|x64
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Debug|Any CPU.Build.0 = Debug|x64
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Debug|x64.ActiveCfg = Debug|x64
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Debug|x86.ActiveCfg = Debug|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Debug|x86.Build.0 = Debug|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Release|Any CPU.ActiveCfg = Release|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Release|x64.ActiveCfg = Release|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Release|x86.ActiveCfg = Release|x86
+		{8EEB5C25-8394-4257-8E57-CDED47CB6F1B}.Release|x86.Build.0 = Release|x86
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|x64.ActiveCfg = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|x64.Build.0 = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|x86.ActiveCfg = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Debug|x86.Build.0 = Debug|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|Any CPU.Build.0 = Release|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|x64.ActiveCfg = Release|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|x64.Build.0 = Release|Any CPU
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|x86.ActiveCfg = Release|x86
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33}.Release|x86.Build.0 = Release|x86
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{D5207217-61C7-4E94-8097-91DBACE57D2A} = {BF650D97-AF98-4638-9C55-21311C6D88DA}
+		{AABC96B8-C462-4B3A-9B5F-2929E3CB7A49} = {BF650D97-AF98-4638-9C55-21311C6D88DA}
+		{AD4959DD-33D7-4C3F-8DB0-7361D8E74A95} = {0958D817-269C-44BE-BEFB-F3E6A409DE91}
+		{B7EEEEFD-5BFF-443D-981C-7B8AB5DFDE33} = {0958D817-269C-44BE-BEFB-F3E6A409DE91}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {3C0509DC-C7F5-48DC-920D-DCFD9C879BD2}
+	EndGlobalSection
+EndGlobal

Meade.net.v3.ncrunchsolution

@@ -0,0 +1,7 @@
+<SolutionConfiguration>
+  <Settings>
+    <AllowParallelTestExecution>True</AllowParallelTestExecution>
+    <CopyReferencedAssembliesToWorkspace>True</CopyReferencedAssembliesToWorkspace>
+    <SolutionConfigured>True</SolutionConfigured>
+  </Settings>
+</SolutionConfiguration>

Meade.net.v3.ncrunchsolution.user

@@ -0,0 +1,16 @@
+<SolutionConfiguration>
+  <Settings>
+    <AutoEnable>True</AutoEnable>
+    <CurrentEngineMode>Run all tests automatically [Global]</CurrentEngineMode>
+    <MetricsTreeShowTestProjects>False</MetricsTreeShowTestProjects>
+    <StatusIndicatorSplitterDistance>25</StatusIndicatorSplitterDistance>
+    <TestsWindowMenuOptions>
+      <VerticalSplitMenuOption>false</VerticalSplitMenuOption>
+      <ShowPassingTestsMenuOption>false</ShowPassingTestsMenuOption>
+      <ShowFailingTestsMenuOption>true</ShowFailingTestsMenuOption>
+      <ShowUnexecutedTestsMenuOption>true</ShowUnexecutedTestsMenuOption>
+      <ShowIgnoredTestsMenuOption>false</ShowIgnoredTestsMenuOption>
+    </TestsWindowMenuOptions>
+    <TestsWindowSplitterDistance>451</TestsWindowSplitterDistance>
+  </Settings>
+</SolutionConfiguration>

Meade.net/BootstrapAscomProfileStore.ps1

@@ -0,0 +1,36 @@
+<#
+This script initializes a bare minimum set of registry entries required for ASCOM.Utilities.Profile to work
+without throwing any exceptions. When building on a build server, or on a computer without the ASCOM Platform installed,
+it may be useful to execute this script as a build step prior to running any unit tests, or calling any code that relies on
+ASCOM.Utilities.Profile. The alternative is to install the ASCOM Platform on the build agent.
+
+NOTE: This script equires elevated permissions because it creates registry keys in the LocalMachine hive.
+#>
+
+$wow = Test-Path HKLM:\SOFTWARE\Wow6432Node
+if ($wow)
+    {
+    $root = "HKLM:\SOFTWARE\Wow6432Node"
+    }
+else
+    {
+    $root = "HKLM:\SOFTWARE"
+    }
+$ascomRoot = $root + "\ASCOM"
+
+if (Test-Path $ascomRoot) 
+    {
+    <# Don't upset an already-existing ASCOM registry #>
+    exit
+    }
+
+<# Create the ASCOM root key and set it's ACL to allow all users read/write access #>
+New-Item -Path $root -Name ASCOM –Force
+$ascomAcl = Get-Acl $ascomRoot
+$aclRule = New-Object System.Security.AccessControl.RegistryAccessRule ("Users","FullControl","Allow")
+$ascomAcl.SetAccessRule($aclRule)
+$ascomAcl | Set-Acl -Path $ascomRoot
+
+<# Now create the bare minimum keys required so that ASCOM.Utilities.Profile doesn't crash and burn #>
+New-ItemProperty -Path $ascomRoot -Name PlatformVersion -Value "6.1" -PropertyType String –Force
+New-ItemProperty -Path $ascomRoot -Name SerTraceFile -Value "C:\SerialTraceAuto.txt" -PropertyType String –Force

Meade.net/ClassFactory.cs

@@ -0,0 +1,233 @@
+using System;
+using System.Runtime.InteropServices;
+using System.Collections;
+
+namespace ASCOM.Meade.net
+{
+
+    #region C# Definition of IClassFactory
+    //
+    // Provide a definition of theCOM IClassFactory interface.
+    //
+    [
+      ComImport,                                                // This interface originated from COM.
+      ComVisible(false),                                        // Must not be exposed to COM!!!
+      InterfaceType(ComInterfaceType.InterfaceIsIUnknown),      // Indicate that this interface is not IDispatch-based.
+      Guid("00000001-0000-0000-C000-000000000046")              // This GUID is the actual GUID of IClassFactory.
+    ]
+    public interface IClassFactory
+    {
+        void CreateInstance(IntPtr pUnkOuter, ref Guid riid, out IntPtr ppvObject);
+        void LockServer(bool fLock);
+    }
+    #endregion
+
+    //
+    // Universal ClassFactory. Given a type as a parameter of the 
+    // constructor, it implements IClassFactory for any interface
+    // that the class implements. Magic!!!
+    //
+    public class ClassFactory : IClassFactory
+    {
+
+        #region Access to ole32.dll functions for class factories
+
+        // Define two common GUID objects for public usage.
+        private static readonly Guid _iidIUnknown = new Guid("{00000000-0000-0000-C000-000000000046}");
+        private static readonly Guid _iidIDispatch = new Guid("{00020400-0000-0000-C000-000000000046}");
+
+        [Flags]
+        enum Clsctx : uint
+        {
+            ClsctxInprocServer = 0x1,
+            ClsctxInprocHandler = 0x2,
+            ClsctxLocalServer = 0x4,
+            ClsctxInprocServer16 = 0x8,
+            ClsctxRemoteServer = 0x10,
+            ClsctxInprocHandler16 = 0x20,
+            ClsctxReserved1 = 0x40,
+            ClsctxReserved2 = 0x80,
+            ClsctxReserved3 = 0x100,
+            ClsctxReserved4 = 0x200,
+            ClsctxNoCodeDownload = 0x400,
+            ClsctxReserved5 = 0x800,
+            ClsctxNoCustomMarshal = 0x1000,
+            ClsctxEnableCodeDownload = 0x2000,
+            ClsctxNoFailureLog = 0x4000,
+            ClsctxDisableAaa = 0x8000,
+            ClsctxEnableAaa = 0x10000,
+            ClsctxFromDefaultContext = 0x20000,
+            ClsctxInproc = ClsctxInprocServer | ClsctxInprocHandler,
+            ClsctxServer = ClsctxInprocServer | ClsctxLocalServer | ClsctxRemoteServer,
+            ClsctxAll = ClsctxServer | ClsctxInprocHandler
+        }
+
+        [Flags]
+        enum Regcls : uint
+        {
+            RegclsSingleuse = 0,
+            RegclsMultipleuse = 1,
+            RegclsMultiSeparate = 2,
+            RegclsSuspended = 4,
+            RegclsSurrogate = 8
+        }
+        //
+        // CoRegisterClassObject() is used to register a Class Factory
+        // into COM's internal table of Class Factories.
+        //
+        [DllImport("ole32.dll")]
+        static extern int CoRegisterClassObject(
+            [In] ref Guid rclsid,
+            [MarshalAs(UnmanagedType.IUnknown)] object pUnk,
+            uint dwClsContext,
+            uint flags,
+            out uint lpdwRegister);
+        //
+        // Called by a COM EXE Server that can register multiple class objects 
+        // to inform COM about all registered classes, and permits activation 
+        // requests for those class objects. 
+        // This function causes OLE to inform the SCM about all the registered 
+        // classes, and begins letting activation requests into the server process.
+        //
+        [DllImport("ole32.dll")]
+        static extern int CoResumeClassObjects();
+        //
+        // Prevents any new activation requests from the SCM on all class objects
+        // registered within the process. Even though a process may call this API, 
+        // the process still must call CoRevokeClassObject for each CLSID it has 
+        // registered, in the apartment it registered in.
+        //
+        [DllImport("ole32.dll")]
+        static extern int CoSuspendClassObjects();
+        //
+        // CoRevokeClassObject() is used to unregister a Class Factory
+        // from COM's internal table of Class Factories.
+        //
+        [DllImport("ole32.dll")]
+        static extern int CoRevokeClassObject(uint dwRegister);
+        #endregion
+
+        #region Constructor and Private ClassFactory Data
+
+        private readonly Type _mClassType;
+        private Guid _mClassId;
+        private readonly ArrayList _mInterfaceTypes;
+        private uint _mCookie;
+        private readonly string _mProgid;
+
+        public ClassFactory(Type type)
+        {
+            if (type == null)
+                throw new ArgumentNullException("type");
+            _mClassType = type;
+
+            //PWGS Get the ProgID from the MetaData
+            _mProgid = Marshal.GenerateProgIdForType(type);
+            _mClassId = Marshal.GenerateGuidForType(type);		// Should be nailed down by [Guid(...)]
+            ClassContext = (uint)Clsctx.ClsctxLocalServer;	// Default
+            Flags = (uint)Regcls.RegclsMultipleuse |			// Default
+                        (uint)Regcls.RegclsSuspended;
+            _mInterfaceTypes = new ArrayList();
+            foreach (Type T in type.GetInterfaces())            // Save all of the implemented interfaces
+                _mInterfaceTypes.Add(T);
+        }
+
+        #endregion
+
+        #region Common ClassFactory Methods
+        public uint ClassContext { get; }
+
+        public Guid ClassId
+        {
+            get => _mClassId;
+            set => _mClassId = value;
+        }
+
+        public uint Flags { get; }
+
+        public bool RegisterClassObject()
+        {
+            // Register the class factory
+            int i = CoRegisterClassObject
+                (
+                ref _mClassId,
+                this,
+                ClassContext,
+                Flags,
+                out _mCookie
+                );
+            return (i == 0);
+        }
+
+        public bool RevokeClassObject()
+        {
+            int i = CoRevokeClassObject(_mCookie);
+            return (i == 0);
+        }
+
+        public static bool ResumeClassObjects()
+        {
+            int i = CoResumeClassObjects();
+            return (i == 0);
+        }
+
+        public static bool SuspendClassObjects()
+        {
+            int i = CoSuspendClassObjects();
+            return (i == 0);
+        }
+        #endregion
+
+        #region IClassFactory Implementations
+        //
+        // Implement creation of the type and interface.
+        //
+        void IClassFactory.CreateInstance(IntPtr pUnkOuter, ref Guid riid, out IntPtr ppvObject)
+        {
+            IntPtr nullPtr = new IntPtr(0);
+            ppvObject = nullPtr;
+
+            //
+            // Handle specific requests for implemented interfaces
+            //
+            foreach (Type iType in _mInterfaceTypes)
+            {
+                if (riid == Marshal.GenerateGuidForType(iType))
+                {
+                    ppvObject = Marshal.GetComInterfaceForObject(Activator.CreateInstance(_mClassType), iType);
+                    return;
+                }
+            }
+            //
+            // Handle requests for IDispatch or IUnknown on the class
+            //
+            if (riid == _iidIDispatch)
+            {
+                ppvObject = Marshal.GetIDispatchForObject(Activator.CreateInstance(_mClassType));
+                return;
+            }
+            else if (riid == _iidIUnknown)
+            {
+                ppvObject = Marshal.GetIUnknownForObject(Activator.CreateInstance(_mClassType));
+            }
+            else
+            {
+                //
+                // Oops, some interface that the class doesn't implement
+                //
+                throw new COMException("No interface", unchecked((int)0x80004002));
+            }
+        }
+
+        void IClassFactory.LockServer(bool bLock)
+        {
+            if (bLock)
+                Server.CountLock();
+            else
+                Server.UncountLock();
+            // Always attempt to see if we need to shutdown this server application.
+            Server.ExitIf();
+        }
+        #endregion
+    }
+}

Meade.net/GarbageCollection.cs

@@ -0,0 +1,55 @@
+using System;
+using System.Threading;
+
+namespace ASCOM.Meade.net
+{
+    /// <summary>
+    /// Summary description for GarbageCollection.
+    /// </summary>
+    class GarbageCollection
+    {
+        private bool _mbContinueThread;
+        private readonly int _miInterval;
+        private readonly ManualResetEvent _mEventThreadEnded;
+
+        public GarbageCollection(int iInterval)
+        {
+            _mbContinueThread = true;
+            _miInterval = iInterval;
+            _mEventThreadEnded = new ManualResetEvent(false);
+        }
+
+        public void GcWatch()
+        {
+            // Pause for a moment to provide a delay to make threads more apparent.
+            while (ContinueThread())
+            {
+                GC.Collect();
+                Thread.Sleep(_miInterval);
+            }
+            _mEventThreadEnded.Set();
+        }
+
+        protected bool ContinueThread()
+        {
+            lock (this)
+            {
+                return _mbContinueThread;
+            }
+        }
+
+        public void StopThread()
+        {
+            lock (this)
+            {
+                _mbContinueThread = false;
+            }
+        }
+
+        public void WaitForThreadToStop()
+        {
+            _mEventThreadEnded.WaitOne();
+            _mEventThreadEnded.Reset();
+        }
+    }
+}

Meade.net/LocalServer.cs

@@ -0,0 +1,639 @@
+//
+// ASCOM.Meade.net Local COM Server
+//
+// This is the core of a managed COM Local Server, capable of serving
+// multiple instances of multiple interfaces, within a single
+// executable. This implementes the equivalent functionality of VB6
+// which has been extensively used in ASCOM for drivers that provide
+// multiple interfaces to multiple clients (e.g. Meade Telescope
+// and Focuser) as well as hubs (e.g., POTH).
+//
+// Written by: Robert B. Denny (Version 1.0.1, 29-May-2007)
+// Modified by Chris Rowland and Peter Simpson to allow use with multiple devices of the same type March 2011
+//
+//
+using System;
+using System.IO;
+using System.Windows.Forms;
+using System.Collections;
+using System.Runtime.InteropServices;
+using System.Reflection;
+using ASCOM.Utilities;
+using Microsoft.Win32;
+using System.Threading;
+using System.Security.Principal;
+using System.Diagnostics;
+
+namespace ASCOM.Meade.net
+{
+    public static class Server
+    {
+
+        #region Access to kernel32.dll, user32.dll, and ole32.dll functions
+        [Flags]
+        enum Clsctx : uint
+        {
+            ClsctxInprocServer = 0x1,
+            ClsctxInprocHandler = 0x2,
+            ClsctxLocalServer = 0x4,
+            ClsctxInprocServer16 = 0x8,
+            ClsctxRemoteServer = 0x10,
+            ClsctxInprocHandler16 = 0x20,
+            ClsctxReserved1 = 0x40,
+            ClsctxReserved2 = 0x80,
+            ClsctxReserved3 = 0x100,
+            ClsctxReserved4 = 0x200,
+            ClsctxNoCodeDownload = 0x400,
+            ClsctxReserved5 = 0x800,
+            ClsctxNoCustomMarshal = 0x1000,
+            ClsctxEnableCodeDownload = 0x2000,
+            ClsctxNoFailureLog = 0x4000,
+            ClsctxDisableAaa = 0x8000,
+            ClsctxEnableAaa = 0x10000,
+            ClsctxFromDefaultContext = 0x20000,
+            ClsctxInproc = ClsctxInprocServer | ClsctxInprocHandler,
+            ClsctxServer = ClsctxInprocServer | ClsctxLocalServer | ClsctxRemoteServer,
+            ClsctxAll = ClsctxServer | ClsctxInprocHandler
+        }
+
+        [Flags]
+        enum Coinit : uint
+        {
+            /// Initializes the thread for multi-threaded object concurrency.
+            CoinitMultithreaded = 0x0,
+            /// Initializes the thread for apartment-threaded object concurrency. 
+            CoinitApartmentthreaded = 0x2,
+            /// Disables DDE for Ole1 support.
+            CoinitDisableOle1Dde = 0x4,
+            /// Trades memory for speed.
+            CoinitSpeedOverMemory = 0x8
+        }
+
+        [Flags]
+        enum Regcls : uint
+        {
+            RegclsSingleuse = 0,
+            RegclsMultipleuse = 1,
+            RegclsMultiSeparate = 2,
+            RegclsSuspended = 4,
+            RegclsSurrogate = 8
+        }
+
+
+        // CoInitializeEx() can be used to set the apartment model
+        // of individual threads.
+        [DllImport("ole32.dll")]
+        static extern int CoInitializeEx(IntPtr pvReserved, uint dwCoInit);
+
+        // CoUninitialize() is used to uninitialize a COM thread.
+        [DllImport("ole32.dll")]
+        static extern void CoUninitialize();
+
+        // PostThreadMessage() allows us to post a Windows Message to
+        // a specific thread (identified by its thread id).
+        // We will need this API to post a WM_QUIT message to the main 
+        // thread in order to terminate this application.
+        [DllImport("user32.dll")]
+        static extern bool PostThreadMessage(uint idThread, uint msg, UIntPtr wParam,
+            IntPtr lParam);
+
+        // GetCurrentThreadId() allows us to obtain the thread id of the
+        // calling thread. This allows us to post the WM_QUIT message to
+        // the main thread.
+        [DllImport("kernel32.dll")]
+        static extern uint GetCurrentThreadId();
+        #endregion
+
+        #region Private Data
+        private static int _objsInUse;                       // Keeps a count on the total number of objects alive.
+        private static int _serverLocks;                     // Keeps a lock count on this application.
+        private static FrmMain _sMainForm = null;               // Reference to our main form
+        private static ArrayList _sComObjectAssys;              // Dynamically loaded assemblies containing served COM objects
+        private static ArrayList _sComObjectTypes;              // Served COM object types
+        private static ArrayList _sClassFactories;              // Served COM object class factories
+        private static string _sAppId = "{4e68ec46-5ffc-49e7-b298-38a548df0bfd}";	// Our AppId
+        private static readonly Object LockObject = new object();
+        #endregion
+
+        // This property returns the main thread's id.
+        public static uint MainThreadId { get; private set; }   // Stores the main thread's thread id.
+
+        // Used to tell if started by COM or manually
+        public static bool StartedByCom { get; private set; }   // True if server started by COM (-embedding)
+
+
+        #region Server Lock, Object Counting, and AutoQuit on COM startup
+        // Returns the total number of objects alive currently.
+        public static int ObjectsCount
+        {
+            get
+            {
+                lock (LockObject)
+                {
+                    return _objsInUse;
+                }
+            }
+        }
+
+        // This method performs a thread-safe incrementation of the objects count.
+        public static int CountObject()
+        {
+            // Increment the global count of objects.
+            return Interlocked.Increment(ref _objsInUse);
+        }
+
+        // This method performs a thread-safe decrementation the objects count.
+        public static int UncountObject()
+        {
+            // Decrement the global count of objects.
+            return Interlocked.Decrement(ref _objsInUse);
+        }
+
+        // Returns the current server lock count.
+        public static int ServerLockCount
+        {
+            get
+            {
+                lock (LockObject)
+                {
+                    return _serverLocks;
+                }
+            }
+        }
+
+        // This method performs a thread-safe incrementation the 
+        // server lock count.
+        public static int CountLock()
+        {
+            // Increment the global lock count of this server.
+            return Interlocked.Increment(ref _serverLocks);
+        }
+
+        // This method performs a thread-safe decrementation the 
+        // server lock count.
+        public static int UncountLock()
+        {
+            // Decrement the global lock count of this server.
+            return Interlocked.Decrement(ref _serverLocks);
+        }
+
+        // AttemptToTerminateServer() will check to see if the objects count and the server 
+        // lock count have both dropped to zero.
+        //
+        // If so, and if we were started by COM, we post a WM_QUIT message to the main thread's
+        // message loop. This will cause the message loop to exit and hence the termination 
+        // of this application. If hand-started, then just trace that it WOULD exit now.
+        //
+        public static void ExitIf()
+        {
+            lock (LockObject)
+            {
+                if ((ObjectsCount <= 0) && (ServerLockCount <= 0))
+                {
+                    if (StartedByCom)
+                    {
+                        UIntPtr wParam = new UIntPtr(0);
+                        IntPtr lParam = new IntPtr(0);
+                        PostThreadMessage(MainThreadId, 0x0012, wParam, lParam);
+                    }
+                }
+            }
+        }
+        #endregion
+
+        // -----------------
+        // PRIVATE FUNCTIONS
+        // -----------------
+
+        #region Dynamic Driver Assembly Loader
+        //
+        // Load the assemblies that contain the classes that we will serve
+        // via COM. These will be located in the same folder as
+        // our executable.
+        //
+        private static bool LoadComObjectAssemblies()
+        {
+            _sComObjectAssys = new ArrayList();
+            _sComObjectTypes = new ArrayList();
+
+            // put everything into one folder, the same as the server.
+            string assyPath = Assembly.GetEntryAssembly().Location;
+            assyPath = Path.GetDirectoryName(assyPath);
+
+            DirectoryInfo d = new DirectoryInfo(assyPath);
+            foreach (FileInfo fi in d.GetFiles("*.dll"))
+            {
+                string aPath = fi.FullName;
+                //
+                // First try to load the assembly and get the types for
+                // the class and the class factory. If this doesn't work ????
+                //
+                try
+                {
+                    Assembly so = Assembly.LoadFrom(aPath);
+                    //PWGS Get the types in the assembly
+                    Type[] types = so.GetTypes();
+                    foreach (Type type in types)
+                    {
+                        // PWGS Now checks the type rather than the assembly
+                        // Check to see if the type has the ServedClassName attribute, only use it if it does.
+                        MemberInfo info = type;
+
+                        object[] attrbutes = info.GetCustomAttributes(typeof(ServedClassNameAttribute), false);
+                        if (attrbutes.Length > 0)
+                        {
+                            //MessageBox.Show("Adding Type: " + type.Name + " " + type.FullName);
+                            _sComObjectTypes.Add(type); //PWGS - much simpler
+                            _sComObjectAssys.Add(so);
+                        }
+                    }
+                }
+                catch (BadImageFormatException)
+                {
+                    // Probably an attempt to load a Win32 DLL (i.e. not a .net assembly)
+                    // Just swallow the exception and continue to the next item.
+                    continue;
+                }
+                catch (Exception e)
+                {
+                    MessageBox.Show("Failed to load served COM class assembly " + fi.Name + " - " + e.Message,
+                        "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Stop);
+                    return false;
+                }
+
+            }
+            return true;
+        }
+        #endregion
+
+        #region COM Registration and Unregistration
+        //
+        // Test if running elevated
+        //
+        private static bool IsAdministrator
+        {
+            get
+            {
+                WindowsIdentity i = WindowsIdentity.GetCurrent();
+                WindowsPrincipal p = new WindowsPrincipal(i);
+                return p.IsInRole(WindowsBuiltInRole.Administrator);
+            }
+        }
+
+        //
+        // Elevate by re-running ourselves with elevation dialog
+        //
+        private static void ElevateSelf(string arg)
+        {
+            ProcessStartInfo si = new ProcessStartInfo();
+            si.Arguments = arg;
+            si.WorkingDirectory = Environment.CurrentDirectory;
+            si.FileName = Application.ExecutablePath;
+            si.Verb = "runas";
+            try { Process.Start(si); }
+            catch (System.ComponentModel.Win32Exception)
+            {
+                MessageBox.Show("The Meade.net was not " + (arg == "/register" ? "registered" : "unregistered") +
+                    " because you did not allow it.", "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Warning);
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show(ex.ToString(), "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Stop);
+            }
+            return;
+        }
+
+        //
+        // Do everything to register this for COM. Never use REGASM on
+        // this exe assembly! It would create InProcServer32 entries 
+        // which would prevent proper activation!
+        //
+        // Using the list of COM object types generated during dynamic
+        // assembly loading, it registers each one for COM as served by our
+        // exe/local server, as well as registering it for ASCOM. It also
+        // adds DCOM info for the local server itself, so it can be activated
+        // via an outboiud connection from TheSky.
+        //
+        private static void RegisterObjects()
+        {
+            if (!IsAdministrator)
+            {
+                ElevateSelf("/register");
+                return;
+            }
+            //
+            // If reached here, we're running elevated
+            //
+
+            Assembly assy = Assembly.GetExecutingAssembly();
+            Attribute attr = Attribute.GetCustomAttribute(assy, typeof(AssemblyTitleAttribute));
+            string assyTitle = ((AssemblyTitleAttribute)attr).Title;
+            attr = Attribute.GetCustomAttribute(assy, typeof(AssemblyDescriptionAttribute));
+            string assyDescription = ((AssemblyDescriptionAttribute)attr).Description;
+
+            //
+            // Local server's DCOM/AppID information
+            //
+            try
+            {
+                //
+                // HKCR\APPID\appid
+                //
+                using (RegistryKey key = Registry.ClassesRoot.CreateSubKey("APPID\\" + _sAppId))
+                {
+                    key.SetValue(null, assyDescription);
+                    key.SetValue("AppID", _sAppId);
+                    key.SetValue("AuthenticationLevel", 1, RegistryValueKind.DWord);
+                }
+                //
+                // HKCR\APPID\exename.ext
+                //
+                using (RegistryKey key = Registry.ClassesRoot.CreateSubKey(string.Format("APPID\\{0}",
+                            Application.ExecutablePath.Substring(Application.ExecutablePath.LastIndexOf('\\') + 1))))
+                {
+                    key.SetValue("AppID", _sAppId);
+                }
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show("Error while registering the server:\n" + ex.ToString(),
+                        "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Stop);
+                return;
+            }
+            finally
+            {
+            }
+
+            //
+            // For each of the driver assemblies
+            //
+            foreach (Type type in _sComObjectTypes)
+            {
+                bool bFail = false;
+                try
+                {
+                    //
+                    // HKCR\CLSID\clsid
+                    //
+                    string clsid = Marshal.GenerateGuidForType(type).ToString("B");
+                    string progid = Marshal.GenerateProgIdForType(type);
+                    //PWGS Generate device type from the Class name
+                    string deviceType = type.Name;
+
+                    using (RegistryKey key = Registry.ClassesRoot.CreateSubKey(string.Format("CLSID\\{0}", clsid)))
+                    {
+                        key.SetValue(null, progid);						// Could be assyTitle/Desc??, but .NET components show ProgId here
+                        key.SetValue("AppId", _sAppId);
+                        using (RegistryKey key2 = key.CreateSubKey("Implemented Categories"))
+                        {
+                            key2.CreateSubKey("{62C8FE65-4EBB-45e7-B440-6E39B2CDBF29}");
+                        }
+                        using (RegistryKey key2 = key.CreateSubKey("ProgId"))
+                        {
+                            key2.SetValue(null, progid);
+                        }
+                        key.CreateSubKey("Programmable");
+                        using (RegistryKey key2 = key.CreateSubKey("LocalServer32"))
+                        {
+                            key2.SetValue(null, Application.ExecutablePath);
+                        }
+                    }
+                    //
+                    // HKCR\CLSID\progid
+                    //
+                    using (RegistryKey key = Registry.ClassesRoot.CreateSubKey(progid))
+                    {
+                        key.SetValue(null, assyTitle);
+                        using (RegistryKey key2 = key.CreateSubKey("CLSID"))
+                        {
+                            key2.SetValue(null, clsid);
+                        }
+                    }
+                    //
+                    // ASCOM 
+                    //
+                    assy = type.Assembly;
+
+                    // Pull the display name from the ServedClassName attribute.
+                    attr = Attribute.GetCustomAttribute(type, typeof(ServedClassNameAttribute)); //PWGS Changed to search type for attribute rather than assembly
+                    string chooserName = ((ServedClassNameAttribute)attr).DisplayName ?? "MultiServer";
+                    using (var p = new Profile())
+                    {
+                        p.DeviceType = deviceType;
+                        p.Register(progid, chooserName);
+                    }
+                }
+                catch (Exception ex)
+                {
+                    MessageBox.Show("Error while registering the server:\n" + ex.ToString(),
+                            "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Stop);
+                    bFail = true;
+                }
+                finally
+                {
+                }
+                if (bFail) break;
+            }
+        }
+
+        //
+        // Remove all traces of this from the registry. 
+        //
+        // **TODO** If the above does AppID/DCOM stuff, this would have
+        // to remove that stuff too.
+        //
+        private static void UnregisterObjects()
+        {
+            if (!IsAdministrator)
+            {
+                ElevateSelf("/unregister");
+                return;
+            }
+
+            //
+            // Local server's DCOM/AppID information
+            //
+            Registry.ClassesRoot.DeleteSubKey(string.Format("APPID\\{0}", _sAppId), false);
+            Registry.ClassesRoot.DeleteSubKey(string.Format("APPID\\{0}",
+                    Application.ExecutablePath.Substring(Application.ExecutablePath.LastIndexOf('\\') + 1)), false);
+
+            //
+            // For each of the driver assemblies
+            //
+            foreach (Type type in _sComObjectTypes)
+            {
+                string clsid = Marshal.GenerateGuidForType(type).ToString("B");
+                string progid = Marshal.GenerateProgIdForType(type);
+                string deviceType = type.Name;
+                //
+                // Best efforts
+                //
+                //
+                // HKCR\progid
+                //
+                Registry.ClassesRoot.DeleteSubKey(String.Format("{0}\\CLSID", progid), false);
+                Registry.ClassesRoot.DeleteSubKey(progid, false);
+                //
+                // HKCR\CLSID\clsid
+                //
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}\\Implemented Categories\\{{62C8FE65-4EBB-45e7-B440-6E39B2CDBF29}}", clsid), false);
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}\\Implemented Categories", clsid), false);
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}\\ProgId", clsid), false);
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}\\LocalServer32", clsid), false);
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}\\Programmable", clsid), false);
+                Registry.ClassesRoot.DeleteSubKey(String.Format("CLSID\\{0}", clsid), false);
+                try
+                {
+                    //
+                    // ASCOM
+                    //
+                    using (var p = new Profile())
+                    {
+                        p.DeviceType = deviceType;
+                        p.Unregister(progid);
+                    }
+                }
+                catch (Exception) { }
+            }
+        }
+        #endregion
+
+        #region Class Factory Support
+        //
+        // On startup, we register the class factories of the COM objects
+        // that we serve. This requires the class facgtory name to be
+        // equal to the served class name + "ClassFactory".
+        //
+        private static bool RegisterClassFactories()
+        {
+            _sClassFactories = new ArrayList();
+            foreach (Type type in _sComObjectTypes)
+            {
+                ClassFactory factory = new ClassFactory(type);                  // Use default context & flags
+                _sClassFactories.Add(factory);
+                if (!factory.RegisterClassObject())
+                {
+                    MessageBox.Show("Failed to register class factory for " + type.Name,
+                        "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Stop);
+                    return false;
+                }
+            }
+            ClassFactory.ResumeClassObjects();                                  // Served objects now go live
+            return true;
+        }
+
+        private static void RevokeClassFactories()
+        {
+            ClassFactory.SuspendClassObjects();                                 // Prevent race conditions
+            foreach (ClassFactory factory in _sClassFactories)
+                factory.RevokeClassObject();
+        }
+        #endregion
+
+        #region Command Line Arguments
+        //
+        // ProcessArguments() will process the command-line arguments
+        // If the return value is true, we carry on and start this application.
+        // If the return value is false, we terminate this application immediately.
+        //
+        private static bool ProcessArguments(string[] args)
+        {
+            bool bRet = true;
+
+            //
+            //**TODO** -Embedding is "ActiveX start". Prohibit non_AX starting?
+            //
+            if (args.Length > 0)
+            {
+
+                switch (args[0].ToLower())
+                {
+                    case "-embedding":
+                        StartedByCom = true;                                        // Indicate COM started us
+                        break;
+
+                    case "-register":
+                    case @"/register":
+                    case "-regserver":                                          // Emulate VB6
+                    case @"/regserver":
+                        RegisterObjects();                                      // Register each served object
+                        bRet = false;
+                        break;
+
+                    case "-unregister":
+                    case @"/unregister":
+                    case "-unregserver":                                        // Emulate VB6
+                    case @"/unregserver":
+                        UnregisterObjects();                                    //Unregister each served object
+                        bRet = false;
+                        break;
+
+                    default:
+                        MessageBox.Show("Unknown argument: " + args[0] + "\nValid are : -register, -unregister and -embedding",
+                            "Meade.net", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
+                        break;
+                }
+            }
+            else
+                StartedByCom = false;
+
+            return bRet;
+        }
+        #endregion
+
+        #region SERVER ENTRY POINT (main)
+        //
+        // ==================
+        // SERVER ENTRY POINT
+        // ==================
+        //
+        [STAThread]
+        static void Main(string[] args)
+        {
+            if (!LoadComObjectAssemblies()) return;                     // Load served COM class assemblies, get types
+
+            if (!ProcessArguments(args)) return;                        // Register/Unregister
+
+            // Initialize critical member variables.
+            _objsInUse = 0;
+            _serverLocks = 0;
+            MainThreadId = GetCurrentThreadId();
+            Thread.CurrentThread.Name = "Main Thread";
+
+            Application.EnableVisualStyles();
+            Application.SetCompatibleTextRenderingDefault(false);
+            _sMainForm = new FrmMain();
+            if (StartedByCom) _sMainForm.WindowState = FormWindowState.Minimized;
+
+            // Register the class factories of the served objects
+            RegisterClassFactories();
+
+            // Start up the garbage collection thread.
+            GarbageCollection garbageCollector = new GarbageCollection(1000);
+            Thread gcThread = new Thread(new ThreadStart(garbageCollector.GcWatch));
+            gcThread.Name = "Garbage Collection Thread";
+            gcThread.Start();
+
+            //
+            // Start the message loop. This serializes incoming calls to our
+            // served COM objects, making this act like the VB6 equivalent!
+            //
+            try
+            {
+                Application.Run(_sMainForm);
+            }
+            finally
+            {
+                // Revoke the class factories immediately.
+                // Don't wait until the thread has stopped before
+                // we perform revocation!!!
+                RevokeClassFactories();
+
+                // Now stop the Garbage Collector thread.
+                garbageCollector.StopThread();
+                garbageCollector.WaitForThreadToStop();
+            }
+        }
+        #endregion
+    }
+}

Meade.net/Localization/LocalisationHelper.cs

@@ -0,0 +1,36 @@
+using System.Globalization;
+using System.Threading;
+using System.Resources;
+using System.Reflection;
+
+namespace ASCOM.Meade.net.Localization
+{
+    internal class LocalisationHelper
+    {
+        private const string LocalizationNamespace = "LocalisationTest.Localization.Resources.Localization";
+        private readonly ResourceManager _resourceManager;
+
+        public LocalisationHelper()
+        {
+            _resourceManager = new ResourceManager(LocalizationNamespace, Assembly.GetExecutingAssembly());
+
+            SetLocalisation(CultureInfo.CurrentCulture.Name);
+        }
+
+        internal void SetLocalisation(string name)
+        {
+            var cultureInfo = new CultureInfo(name);
+
+            //CultureInfo.DefaultThreadCurrentCulture = cultureInfo;
+            //CultureInfo.DefaultThreadCurrentUICulture = cultureInfo;
+
+            Thread.CurrentThread.CurrentCulture = cultureInfo;
+            Thread.CurrentThread.CurrentUICulture = cultureInfo;
+        }
+
+        internal string GetString(string key)
+        {
+            return _resourceManager.GetString(key);
+        }
+    }
+}

Meade.net/Meade.net.csproj

@@ -0,0 +1,207 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="12.0">
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{3689A2CB-94C5-4012-A5CF-7E7D1DD27143}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>ASCOM.Meade.net</RootNamespace>
+    <AssemblyName>ASCOM.Meade.net.Server</AssemblyName>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <OldToolsVersion>2.0</OldToolsVersion>
+    <UpgradeBackupLocation />
+    <TargetFrameworkProfile />
+    <IsWebBootstrapper>false</IsWebBootstrapper>
+    <PublishUrl>publish\</PublishUrl>
+    <Install>true</Install>
+    <InstallFrom>Disk</InstallFrom>
+    <UpdateEnabled>false</UpdateEnabled>
+    <UpdateMode>Foreground</UpdateMode>
+    <UpdateInterval>7</UpdateInterval>
+    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+    <UpdatePeriodically>false</UpdatePeriodically>
+    <UpdateRequired>false</UpdateRequired>
+    <MapFileExtensions>true</MapFileExtensions>
+    <ApplicationRevision>0</ApplicationRevision>
+    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+    <UseApplicationTrust>false</UseApplicationTrust>
+    <BootstrapperEnabled>true</BootstrapperEnabled>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>..\bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>..\bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <PlatformTarget>x86</PlatformTarget>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup>
+    <SignAssembly>true</SignAssembly>
+  </PropertyGroup>
+  <PropertyGroup>
+    <AssemblyOriginatorKeyFile>LocalServer.snk</AssemblyOriginatorKeyFile>
+  </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationIcon>ASCOM.ico</ApplicationIcon>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>..\bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <OutputPath>..\bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <Optimize>true</Optimize>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="ASCOM.Astrometry, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Astrometry.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Attributes, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Attributes.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Cache, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Cache.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Controls, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Controls.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DeviceInterfaces, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DeviceInterfaces.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.DriverAccess, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.DriverAccess.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Exceptions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Exceptions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Internal.Extensions, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Internal.Extensions.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.SettingsProvider, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.SettingsProvider.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.dll</HintPath>
+    </Reference>
+    <Reference Include="ASCOM.Utilities.Video, Version=6.1.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7, processorArchitecture=MSIL">
+      <HintPath>..\packages\ASCOM.Platform.6.4.2\lib\net40\ASCOM.Utilities.Video.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="ClassFactory.cs" />
+    <Compile Include="frmMain.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="frmMain.Designer.cs">
+      <DependentUpon>frmMain.cs</DependentUpon>
+    </Compile>
+    <Compile Include="GarbageCollection.cs" />
+    <Compile Include="Localization\LocalisationHelper.cs" />
+    <Compile Include="LocalServer.cs" />
+    <Compile Include="ProfileProperties.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <Compile Include="TelescopeList.cs" />
+    <Compile Include="Wrapper\SharedResourcesWrapper.cs" />
+    <EmbeddedResource Include="frmMain.resx">
+      <SubType>Designer</SubType>
+      <DependentUpon>frmMain.cs</DependentUpon>
+    </EmbeddedResource>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="ReferenceCountedObject.cs" />
+    <Compile Include="SetupDialogForm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="SetupDialogForm.designer.cs">
+      <DependentUpon>SetupDialogForm.cs</DependentUpon>
+    </Compile>
+    <Compile Include="SharedResources.cs" />
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+    </EmbeddedResource>
+    <EmbeddedResource Include="SetupDialogForm.resx">
+      <DependentUpon>SetupDialogForm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+  </ItemGroup>
+  <ItemGroup>
+    <Content Include="ASCOM.ico" />
+    <Content Include="ASCOM.png" />
+    <Content Include="ReadMe.htm" />
+    <None Include="BootstrapAscomProfileStore.ps1" />
+    <None Include="packages.config" />
+    <None Include="Resources\ASCOM.bmp" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="app.config" />
+    <None Include="LocalServer.snk" />
+  </ItemGroup>
+  <ItemGroup>
+    <BootstrapperPackage Include="Microsoft.Net.Client.3.5">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1 Client Profile</ProductName>
+      <Install>false</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Windows.Installer.3.1">
+      <Visible>False</Visible>
+      <ProductName>Windows Installer 3.1</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

Meade.net/ProfileProperties.cs

@@ -0,0 +1,11 @@
+namespace ASCOM.Meade.net
+{
+    public class ProfileProperties
+    {
+        // properies that are part of the profile
+        public string ComPort { get; set; }
+        public bool TraceLogger { get; set; }
+        public double GuideRateArcSecondsPerSecond { get; set; }
+        public string Precision { get; set; }
+    }
+}

Meade.net/Properties/AssemblyInfo.cs

@@ -0,0 +1,26 @@
+using System.Reflection;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("ASCOM Meade.net server")]
+[assembly: AssemblyDescription("ASCOM multi-interface server for Meade.net")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("cjdawson.com")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("Copyright © 2019 cjdawson.com")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+[assembly: AssemblyVersion("0.0.0.0")]
+[assembly: AssemblyFileVersion("0.0.0.0")]
+
+[assembly: ComVisibleAttribute(false)]

Meade.net/Properties/Resources.Designer.cs

@@ -0,0 +1,73 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ASCOM.Meade.net.Properties {
+    using System;
+    
+    
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "16.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources {
+        
+        private static global::System.Resources.ResourceManager resourceMan;
+        
+        private static global::System.Globalization.CultureInfo resourceCulture;
+        
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources() {
+        }
+        
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager {
+            get {
+                if (object.ReferenceEquals(resourceMan, null)) {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ASCOM.Meade.net.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+        
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture {
+            get {
+                return resourceCulture;
+            }
+            set {
+                resourceCulture = value;
+            }
+        }
+        
+        /// <summary>
+        ///   Looks up a localized resource of type System.Drawing.Bitmap.
+        /// </summary>
+        internal static System.Drawing.Bitmap ASCOM {
+            get {
+                object obj = ResourceManager.GetObject("ASCOM", resourceCulture);
+                return ((System.Drawing.Bitmap)(obj));
+            }
+        }
+    }
+}

Meade.net/Properties/Resources.resx

@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <assembly alias="System.Windows.Forms" name="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
+  <data name="ASCOM" type="System.Resources.ResXFileRef, System.Windows.Forms">
+    <value>..\ASCOM.png;System.Drawing.Bitmap, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</value>
+  </data>
+</root>

Meade.net/ReadMe.htm

@@ -0,0 +1,666 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
+<HTML>
+  <HEAD>
+    <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=windows-1252"/>
+    <TITLE>Untitled Document</TITLE>
+    <META NAME="GENERATOR" CONTENT="OpenOffice.org 3.2  (Win32)"/>
+    <META NAME="CREATED" CONTENT="0;0"/>
+    <META NAME="CHANGEDBY" CONTENT="Chris Rowland"/>
+    <META NAME="CHANGED" CONTENT="20110422;10442800"/>
+    <META NAME="CHANGEDBY" CONTENT="Chris Rowland"/>
+    <STYLE TYPE="text/css">
+      <!--
+		@page { margin: 2cm }
+		P { font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal }
+		TD P { font-family: "Verdana", "Arial", "Helvetica", sans-serif; font-weight: normal }
+		H3 { font-family: "Arial", "Helvetica", sans-serif }
+		H2 { font-family: "Arial", "Helvetica", sans-serif }
+		H4 { font-family: "Arial", "Helvetica", sans-serif }
+		PRE { margin-left: 0.18cm; margin-right: 0.18cm; margin-top: 0.18cm; margin-bottom: 0.18cm; background: #ccffff }
+		PRE.western { font-weight: normal }
+		PRE.cjk { font-family: "NSimSun", monospace; font-weight: normal }
+		PRE.ctl { font-weight: normal }
+		EM.underline { text-decoration: underline }
+	-->
+    </STYLE>
+  </HEAD>
+  <BODY LANG="en-GB" DIR="LTR">
+    <TABLE WIDTH="100%" BORDER="0" CELLPADDING="4" CELLSPACING="0" STYLE="page-break-before: always">
+      <TR>
+        <TD>
+          <H2>
+            ASCOM LocalServer (singleton) Host
+          </H2>
+        </TD>
+      </TR>
+    </TABLE>
+    <P>
+      <BR/>
+      <BR/>
+
+    </P>
+    <H4>
+      You have just created a local server (singleton) host for one or
+      more ASCOM driver classes.
+    </H4>
+    <HR/>
+    <P>
+      This project implements an ASCOM host server for one or more
+      driver classes in a single-instance executable. It can be used to
+      serve multiple instances of a single driver class (hub), provide
+      driver services for multiple devices (e.g., Telescope and Focuser) to
+      multiple applications and allow multiple devices of the same type to
+      be connected. In the latter scenario, the multiple driver classes
+      will often share one or more resources such as the serial connection
+      and a microcontroller in the combined device. From the client's
+      perspective, using the drivers served by the local server is exactly
+      the same as if the drivers are loaded into the client's process space
+      (in-proc servers).
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <STRONG>
+        <SPAN STYLE="background: #ffee88">NOTE:</SPAN>
+      </STRONG>
+      <SPAN STYLE="background: #ffee88">
+        Unless you are prepared to handle all of the timing issues that arise
+        when multiple clients are accessing the properties and methods of
+        your driver(s), stop now. Just because the local server serializes
+        the calls to your driver(s)' properties and methods does not mean
+        that there will be no timing or concurrency issues.<BR/>
+        &nbsp;<BR/>For
+        example, suppose the hub serves instances of a Telescope driver. One
+        client sets the TargetRightAscension property, then another sets
+        TargetRightAscension to a different value, then the first client sets
+        TargetDeclination, then the first client calls SlewToTarget()
+        followed by the second client calling SlewToTarget(). Besides the
+        first client's slew command sending the scope to the wrong (and
+        possibly dangerous) coordinates, there is the problem of the second
+        client trying to slew a slewing scope. Local server drivers are
+        tricky to get right. There is no such thing as &quot;ignorance is
+        bliss&quot; here.
+
+      </SPAN>
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <SPAN STYLE="background: #ffee88">
+        This implementation has changed
+        from what was defined for Platform 5.5 as follows:
+      </SPAN>
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <SPAN STYLE="background: #ffee88">
+        The drivers are now installed in
+        the same folder as the local server executable. This makes deployment
+        cleaner because the whole driver can exist in a single folder
+        independently of other drivers.
+      </SPAN>
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <SPAN STYLE="background: #ffee88">
+        The ProgId and friendly name as
+        displayed by the Chooser are defined using attributes. This allows
+        driver dlls to be identified clearly and so avoids confusion with
+        other dlls that may be required such as interop dlls.
+      </SPAN>
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <SPAN STYLE="background: #ffee88">
+        Some changes have been made that
+        will facilitate generating multiple drivers of the same type.
+      </SPAN>
+    </P>
+    <P STYLE="margin-left: 0.42cm; margin-right: 0.42cm; border: 1px solid #000000; padding: 0.21cm">
+      <SPAN STYLE="background: #ffee88">
+        I've put some additional advice and
+        comments in the notes below <I>in italics.</I>
+      </SPAN>
+    </P>
+    <P>
+      You're probably anxious to get going, but you really should read
+      through the <A HREF="#theory">Theory of Operation</A> and <A HREF="#details">
+        Detailed
+        Use and Deployment
+      </A> below.
+    </P>
+    <P>You must do the following in order to complete your local server:</P>
+    <OL>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          In the local server's project
+          properties, Application tab, change BOTH the AssemblyName and the
+          default assembly name to ASCOM.xxx (e.g., ASCOM.SuperScope). <I>
+            This
+            may be done by default now.
+          </I>
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Add one or more driver skeleton
+          projects using the in-proc templates. You may use either the C# or
+          VB templates. Project name is not important (not used in ProgID)
+          choose something like TelescopeDriver. You will be changing the
+          substituted project name in these projects below. If you ensure that
+          the LocalServer and all the driver projects have the same NameSpace
+          e.g. ASCOM.SuperScope the renaming in section 6a will not be
+          required.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Develop and debug these driver
+          projects as normal in-process assemblies. This will be much simpler
+          because the driver and test code can be debugged in the same
+          process.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Build the LocalServer.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Set a reference to the local
+          server <STRONG>project</STRONG> in each of the driver skeleton
+          projects.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">In each skeleton driver project:</P>
+        <OL TYPE="a">
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              Do a Find In Files for the
+              project name of the skeleton driver (e.g., TelescopeDriver) and
+              change it to match the project name of your local server (e.g.
+              SuperScope). You don't have to do this in the ReadMe.html file.
+              Everywhere else, however, is IMPORTANT. This sets the correct
+              namespace, progID, etc. If you're a bit more brave, you can use
+              Replace in Files. <I>
+                This may not be needed if the correct
+                namespace and naming conventions have been followed when the
+                drivers and local server were generated.
+              </I>
+            </P>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              In project properties,
+              Application tab, change the assembly name to
+              ASCOM.<EM CLASS="underline">localserverprojectname</EM>.<EM>drivertype</EM>,
+              (e.g., ASCOM.SuperScope.Telescope).
+            </P>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              In project properties,
+              Application tab, click Assembly Information...
+            </P>
+            <UL>
+              <LI>
+                <P STYLE="margin-bottom: 0cm">
+                  Assure that Make assembly COM
+                  visible is <STRONG>on</STRONG> (it should already be on).
+                </P>
+              </LI>
+              <LI>
+                <P STYLE="margin-bottom: 0cm">
+                  Edit the Product Name to be the
+                  &quot;friendly name&quot; of your driver as will be shown in the
+                  Chooser. <I>
+                    Not used now, use the ServedClassName attribute
+                    instead.
+                  </I>
+                </P>
+              </LI>
+            </UL>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              In project properties, Build tab,
+              turn <STRONG>off</STRONG> Register for COM Interop.
+            </P>
+          </LI>
+          <LI>
+            <P>
+              Modify the driver class declaration to inherit from
+              ReferenceCountedObjectBase. Examples:<BR/>C#:
+            </P>
+            <PRE CLASS="western">
+              public class Telescope :
+              ReferenceCountedObjectBase,
+              ITelescope
+            </PRE>
+            <P>
+              VB:
+            </P>
+            <PRE CLASS="western">
+              Public Class Telescope
+              '==================================
+              Inherits ReferenceCountedObjectBase
+              Implements ITelescope
+              '==================================
+            </PRE>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              In driver.cs/driver.vb, remove
+              the entire ASCOM Registration region
+            </P>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              In driver.cs/driver.vb, remove
+              the private strings for driver ID and driver description. <I>
+                They
+                may be needed internally, and if so should be set from the
+                associated attributes, ServedClassName for the description and
+                ProgId for the driver Id.
+              </I>
+            </P>
+          </LI>
+          <LI>
+            <P STYLE="margin-bottom: 0cm">
+              Modify the class attributes by
+              adding the ServedClassName and ProgID attributes. The
+              ServedClassName attribute must be the friendly name shown as the
+              device name in the Chooser and the ProgId the progid of the driver
+              e.g. ASCOM.SuperScope.Telescope. The class header should look like
+              this:
+            </P>
+            <P STYLE="margin-bottom: 0cm">C#:</P>
+            <PRE CLASS="western" STYLE="margin-right: 0.16cm">
+              <FONT FACE="Consolas" SIZE="2" STYLE="font-size: 9pt">
+                [<FONT COLOR="#2b91af">Guid</FONT><FONT COLOR="#000000">(</FONT><FONT COLOR="#a31515">&quot;0AE8B38D-10A1-4A8D-A5B7-1B050F74B48B&quot;</FONT><FONT COLOR="#000000">)]  // set by the template</FONT>
+                <FONT COLOR="#000000">[</FONT><FONT COLOR="#2b91af">ProgId</FONT><FONT COLOR="#000000">(</FONT><FONT COLOR="#a31515">&quot;ASCOM.SuperScope.Telescope&quot;</FONT><FONT COLOR="#000000">)]</FONT>
+                <FONT COLOR="#000000">[</FONT><FONT COLOR="#2b91af">ServedClassName</FONT><FONT COLOR="#000000"> (</FONT><FONT COLOR="#a31515">&quot;Super Scope Telescope&quot;</FONT><FONT COLOR="#000000">)]</FONT>
+                <FONT COLOR="#000000">[</FONT><FONT COLOR="#2b91af">ClassInterface</FONT><FONT COLOR="#000000">(</FONT><FONT COLOR="#2b91af">ClassInterfaceType</FONT><FONT COLOR="#000000">.None)]</FONT>
+                <FONT COLOR="#0000ff">public </FONT><FONT COLOR="#0000ff">class </FONT><FONT COLOR="#2b91af">Telescope </FONT><FONT COLOR="#000000">: </FONT><FONT COLOR="#2b91af">ReferenceCountedObjectBase</FONT><FONT COLOR="#000000"> , </FONT><FONT COLOR="#2b91af">ITelescope</FONT>
+              </FONT>
+            </PRE>
+          </LI>
+        </OL>
+      </LI>
+    </OL>
+    <P STYLE="margin-bottom: 0cm">
+      <BR/>
+    </P>
+    <OL>
+      <OL TYPE="a">
+        <P>VB:</P>
+        <PRE CLASS="western">
+          <FONT FACE="Consolas" SIZE="2" STYLE="font-size: 9pt">
+            &lt;Guid(&ldquo;<FONT COLOR="#a31515">0AE8B38D-10A1-4A8D-A5B7-1B050F74B48B</FONT>&rdquo;)&gt;
+            &lt;ProgId(&ldquo;ASCOM.SuperScope.Telescope&rdquo;)&gt;
+            &lt;ServedClassName(&ldquo;Super Scope Telescope&rdquo;)&gt;
+            Public Class Telescope
+            '==================================
+            Inherits ReferenceCountedObjectBase
+            Implements ITelescope
+            '==================================
+          </FONT>
+        </PRE>
+      </OL>
+    </OL>
+    <P STYLE="margin-left: 2.5cm">
+      Add the following line to the driver
+      constructor, this sets the driver ID using the ProgId Attribute:
+    </P>
+    <OL>
+      <OL TYPE="a">
+        <P>C#</P>
+        <PRE CLASS="western">
+          <FONT FACE="Consolas" SIZE="2" STYLE="font-size: 9pt">
+            s_csDriverID = <FONT COLOR="#2b91af">Marshal</FONT><FONT COLOR="#000000">.GenerateProgIdForType(</FONT><FONT COLOR="#0000ff">this</FONT><FONT COLOR="#000000">.GetType());</FONT>
+          </FONT>
+        </PRE>
+        <P>VB:</P>
+        <PRE CLASS="western">
+          <FONT FACE="Consolas" SIZE="2" STYLE="font-size: 9pt">
+            s_csDriverID = <FONT COLOR="#2b91af">Marshal</FONT><FONT COLOR="#000000">.GenerateProgIdForType(</FONT><FONT COLOR="#0000ff">Me</FONT><FONT COLOR="#000000">.GetType())</FONT>
+          </FONT>
+        </PRE>
+      </OL>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Unless you're writing a
+          single-driver hub, you will have two or more driver types (e.g.
+          Telescope and Focuser) and thus two or more driver assembly projects
+          added. Presumably, these drivers need to share some resources (e.g.
+          a single COM port via Helper.Serial). <U>
+            Put shared resources into
+            the SharedResources class provided
+          </U>. There are some examples that
+          should give a clue, modify and delete these as required.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          A shared serial port is already
+          provided (see SharedResources.cs) as <FONT FACE="Lucida Console, Courier New, Courier, monospace">SharedResources.SharedSerial</FONT>
+          and it is an ASCOM Helper Serial object. You may wish to define
+          additional shared resources in static member variables with public
+          static accessor properties as is already done for SharedSerial.
+          Unfortunately, if you are a Visual Basic programmer, you will have
+          to make these additions in C#.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          If you are writing a hub and don't
+          need the serial port, in SharedResources.cs you can remove the
+          public static SharedSerial property, the m_SharedSerial member in
+          the private data region, and the line in main that initializes it.
+          If you don't need any other shared resources for your hub, then you
+          can remove the SharedResources.cs file completely.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          If you modified the LocalServer,
+          build it again now. This will refresh the stuff that's visible to
+          the drivers.
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          Build the driver skeletons to
+          verify that you got all of the namespace and other variable changes.
+        </P>
+      </LI>
+      <LI>
+        <P>
+          The local server dynamically loads the driver assemblies from
+          the same folder as the local server executable. <BR/>
+          <BR/>During
+          development, you'll need to add a post-build task to each of your
+          driver assembly projects which puts a copy of the driver assembly
+          into the local server executable folder. Here is an example:
+        </P>
+        <PRE CLASS="western">    copy &quot;$(TargetPath)&quot; &quot;$(SolutionDir)\SuperScope\$(OutDir)\$(TargetFileName)&quot;</PRE>
+        <P STYLE="margin-bottom: 0cm">
+          This assumes that the server project is called &ldquo;SuperScope&rdquo;,
+          and handles using the debug or release build.<BR/>
+          Note the quotes for
+          possible path elements with spaces in them. <I>
+            An alternative is to
+            set the build path to the required destination instead of the
+            default path.
+          </I>
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          <I>
+            Make sure the drivers are
+            registered through the local server by running it with the /register
+            parameter, see below for details.
+          </I>
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          <SPAN STYLE="background: #ffff00">IMPORTANT:</SPAN>
+          With a local server based driver (or hub) it is possible for
+          multiple clients to control the device(s). It is up to you to
+          safeguard against abuse. <I>
+            The sort of thing that's needed is to
+            have a counter of the number of connections to a device, the
+            connection is only fully broken when the number of connections is
+            zero. You may also need code to prevent several drivers from talking
+            to the hardware at the same time, the lock pattern is useful for
+            that.
+          </I>
+        </P>
+      </LI>
+      <LI>
+        <P>
+          You may want to add controls and/or status information to the
+          main form frmMain of the local server. Please resist the temptation
+          to turn the local server's main form into a graphical device control
+          panel. Instead, make a separate application that uses the served
+          driver(s). <U>A driver is not a program!</U>
+        </P>
+      </LI>
+    </OL>
+    <H3>Notes</H3>
+    <UL>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          The local server handles all of
+          the registration and unregistration for each of its served driver
+          classes, including the ASCOM Chooser info and the DCOM/AppID info
+          needed for activation from TheSky. By running the server from a
+          command line and giving /register or /unregister as the command line
+          option, it will register or unregister all served classes
+          (respectively). <SPAN STYLE="background: #ffff00">
+            Never use REGASM
+            on the local server executable!
+          </SPAN> <I>
+            This can be done in the
+            Visual Studio IDE by setting the server project to run as startup
+            and setting the command line argument to /register in Debug &ndash;
+            Start Options.
+          </I>
+        </P>
+      </LI>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          When you make the installer for
+          your local server based driver/hub, do not let it register the
+          executable for COM. Instead, have it activate the installed local
+          server with the /register option.
+        </P>
+      </LI>
+      <LI>
+        <P>
+          The ASCOM registration uses the ServedClassName attribute as
+          the friendly name that will show in the chooser and the ProgId
+          attribute as the driver Id.
+        </P>
+      </LI>
+      <LI>
+        <P>
+          The best deployment way is to install all the files in a
+          folder that's a sub folder of the main driver, so the SuperScope
+          driver files will be in the folder ...\ASCOM\Telescope\SuperScope.
+          This can be done in the Inno script by changing the DefaultDirName
+          like this:<BR/>
+            DefaultDirName=&quot;{cf}\ASCOM\Telescope\SuperScope&quot;<BR/>then
+	the files can all be installed with DestDir: {app}; 
+        </P>
+      </LI>
+    </UL>
+    <H3>
+      <A NAME="theory"></A>Theory of Operation
+    </H3>
+    <P>
+      The local server is an executable which can provide multiple
+      instances of multiple drivers to multiple clients. This capability is
+      needed for two applications:
+    </P>
+    <UL>
+      <LI>
+        <P STYLE="margin-bottom: 0cm">
+          A hub, which allows multiple
+          clients to share a single device
+        </P>
+      </LI>
+      <LI>
+        <P>
+          A device which provides multiple services, such as a
+          telescope which has a focuser built-in where both the telescope and
+          focuser are controlled by the same serial connection and different
+          client programs need to control to the focuser and telescope.
+        </P>
+      </LI>
+    </UL>
+    <P>
+      By simply dropping suitably developed driver assemblies into the
+      same folder as the local server executable, the local server will
+      find them and register them for COM and ASCOM and serve any number of
+      instances of the drivers' interfaces to any number of client
+      programs. It does this by locating and loading the driver assemblies,
+      analysing them to detect their classes and interfaces, and
+      implementing a class factory that can create instances of them for
+      clients.
+    </P>
+    <P>
+      A driver is an assembly which contains a class that <EM>implements</EM>
+      one of the ASCOM standard driver interfaces and <EM>inherits</EM> the
+      ReferenceCountedObjectBase class of the local server. Apart from
+      that, driver assemblies are identical to those that are used
+      in-process (DLL-type). The instructions above detail the steps needed
+      to convert an in-process driver into one that can be served by the
+      local server.
+    </P>
+    <P>
+      The name of the local server is important, so we provide it as a
+      <EM>template</EM> from which you can create a local server for your
+      produce. To make this clear, let's assume that your company AlphaTech
+      produces a telescope system which contains a microcontroller that is
+      able to control not only the telescope mount, but also a focuser and
+      a camera rotator. The mount, focuser, and rotator are all controlled
+      via commands sent through a common serial line connecting the
+      computer to the microcontroller, so you need a local server. In
+      ASCOM, then, you probably want your system to appear as
+      AlphaTech.Telescope, AlphaTech.Focuser, and AlphaTech.Rotator. Then
+      you would name the local server AlphaTech. Be sure to give this due
+      consideration before creating the template, the project name is the
+      name of your local server. <I>
+        Is this still correct? I get the
+        impression that ASCOM.AlphaTech.Server would be OK.
+      </I>
+    </P>
+    <P>
+      The fact that driver classes inherit from the local server's
+      ReferenceCountedObjectBase class allows the local server to maintain
+      a reference count on the driver class. If a client creates an
+      instance of a served driver, the local server automatically starts up
+      and provides an instance of the class to the client. Once started the
+      local server can provide additional instances of any of its served
+      driver classes. If the reference count of all served classes drops to
+      zero as a result of clients releasing their instances, the local
+      server will automatically exit.
+    </P>
+    <P>
+      Registration services provided include not only the basic COM
+      class registration, but also DCOM/AppID info needed to use the served
+      classes from outbound connections from Software Bisque's TheSky. It
+      also registers the served classes for the ASCOM Chooser. The
+      &quot;friendly&quot; name of each served driver that appears in the
+      chooser comes from the driver's ServedClassName attribute. This also
+      used to identify a driver so that non driver dlls, such as Interop
+      dlls can be ignored. The COM ProgID for each served driver is
+      specified in the ProgId attribute - ASCOM.<EM>localservername</EM>.<EM>drivertype</EM>,
+      for example, ASCOM.AlphaTech.Telescope, where AlphaTech is the local
+      server name and Telescope is the type of the driver. Unregistering
+      removes all of this information from the system. Specifying the
+      ProgId as an attribute allows multiple driver assemblies to be
+      generated using the same source and namespace. This is used to
+      provide multiple instances of the same driver, each with a different
+      ProgId and so able to be registered separately.
+    </P>
+    <P>
+      Driver DLLs are identified for registering/unregistering because
+      they contain a type with the ServedClassName attribute. Only these
+      will be registered for Com and ASCOM.  This has changed; in Platform
+      5 there was no attribute and the local server attempted to register
+      all dlls. The new behaviour allows support dlls such as interop dlls
+      to be included without them being registered incorrectly.  There was
+      also an interim version where the ServedClassName attribute was on
+      the assembly, not the class.  <I>
+        All these previous versions, and the
+        new drivers will operate together with Platform 6, the changes are
+        local to the individual drivers.
+      </I>
+    </P>
+    <H3>
+      <A NAME="details"></A>Detailed Use and Deployment
+    </H3>
+    <P>
+      Once you have built your local server and the served driver class
+      assemblies, here's how to use it. To register the served classes,
+      activate the local server from a shell command line with the option
+      /register (or /regserver, for VB6 compatibility):
+    </P>
+    <PRE CLASS="western">
+      C:\xxx&gt; <EM>localserver</EM>.exe /register
+    </PRE>
+    <P>
+      To unregister the local server and its drivers, activate the local
+      server from a shell command line with the option /unregister (or
+      /unregserver for VB6 compatibility):
+    </P>
+    <PRE CLASS="western">
+      C:\xxx&gt; <EM>localserver</EM>.exe /unregister
+    </PRE>
+    <P>
+      When the operating system starts the local server in response to a
+      client creating one of it's served driver classes, the command option
+      /embedding is included. The local server's code detects this and sets
+      a variable that you can use.
+    </P>
+    <P STYLE="margin-bottom: 0cm">
+      When deploying a hub or set of drivers
+      with the local server, you'll have to arrange for the local server
+      and the driver assemblies to be placed together in a folder in the
+      ASCOM driver folder. Any support files, such as Interop DLLs can be
+      put in the same fiolder. That's all you need to do, the local server
+      will find them in the same folder as it is located in.
+    </P>
+    <DIV ALIGN="RIGHT">
+      <TABLE WIDTH="100"% BORDER="0" CELLPADDING="4" CELLSPACING="0">
+        <TR>
+          <TD>
+            <TABLE WIDTH="100"% BORDER="0" CELLPADDING="4" CELLSPACING="0">
+              <TR>
+                <TD>
+                  <H3>ASCOM Initiative</H3>
+                </TD>
+                <TD>
+                  <IMG SRC="ASCOM.png" NAME="graphics1" ALIGN="RIGHT" WIDTH="48" HEIGHT="56" BORDER="0"/>
+                </TD>
+              </TR>
+            </TABLE>
+            <P>
+              <BR/>
+              <BR/>
+
+            </P>
+          </TD>
+        </TR>
+        <TR>
+          <TD>
+            <P>
+              The ASCOM Initiative consists of a group of astronomy software
+              developers and instrument vendors whose goals are to promote the
+              driver/client model and scripting automation.
+            </P>
+            <P>
+              See the <A HREF="http://ascom-standards.org/" TARGET="browser">
+                ASCOM
+                web site
+              </A> for more information. Please participate in the
+              <A HREF="http://tech.groups.yahoo.com/group/ASCOM-Talk" TARGET="browser">
+                ASCOM-Talk
+                Yahoo Group
+              </A>.
+            </P>
+          </TD>
+        </TR>
+      </TABLE>
+    </DIV>
+    <P>
+      <BR/>
+      <BR/>
+
+    </P>
+    <P>
+      <BR/>
+      <BR/>
+
+    </P>
+  </BODY>
+</HTML>

Meade.net/ReferenceCountedObject.cs

@@ -0,0 +1,23 @@
+using System.Runtime.InteropServices;
+
+namespace ASCOM.Meade.net
+{
+    [ComVisible(false)]
+    public class ReferenceCountedObjectBase
+    {
+        public ReferenceCountedObjectBase()
+        {
+            // We increment the global count of objects.
+            Server.CountObject();
+        }
+
+        ~ReferenceCountedObjectBase()
+        {
+            // We decrement the global count of objects.
+            Server.UncountObject();
+            // We then immediately test to see if we the conditions
+            // are right to attempt to terminate this server application.
+            Server.ExitIf();
+        }
+    }
+}

Meade.net/SetupDialogForm.cs

@@ -0,0 +1,114 @@
+using System;
+using System.ComponentModel;
+using System.Runtime.InteropServices;
+using System.Windows.Forms;
+
+namespace ASCOM.Meade.net
+{
+    [ComVisible(false)] // Form not registered for COM!
+    public partial class SetupDialogForm : Form
+    {
+        public SetupDialogForm()
+        {
+            InitializeComponent();
+        }
+
+        private void cmdCancel_Click(object sender, EventArgs e) // Cancel button event handler
+        {
+            Close();
+        }
+
+        private void BrowseToAscom(object sender, EventArgs e) // Click on ASCOM logo event handler
+        {
+            try
+            {
+                System.Diagnostics.Process.Start("http://ascom-standards.org/");
+            }
+            catch (Win32Exception noBrowser)
+            {
+                if (noBrowser.ErrorCode == -2147467259)
+                    MessageBox.Show(noBrowser.Message);
+            }
+            catch (Exception other)
+            {
+                MessageBox.Show(other.Message);
+            }
+        }
+
+        public void SetProfile(ProfileProperties profileProperties)
+        {
+            chkTrace.Checked = profileProperties.TraceLogger;
+            // set the list of com ports to those that are currently available
+            comboBoxComPort.Items.Clear();
+            comboBoxComPort.Items.AddRange(System.IO.Ports.SerialPort
+                .GetPortNames()); // use System.IO because it's static
+            // select the current port if possible
+            if (comboBoxComPort.Items.Contains(profileProperties.ComPort))
+            {
+                comboBoxComPort.SelectedItem = profileProperties.ComPort;
+            }
+
+            txtGuideRate.Text = profileProperties.GuideRateArcSecondsPerSecond.ToString();
+            try
+            {
+                cboPrecision.SelectedItem = profileProperties.Precision;
+            }
+            catch (Exception e)
+            {
+                cboPrecision.SelectedItem = "Unchanged";
+            }
+        }
+
+    public ProfileProperties GetProfile()
+        {
+            var profileProperties = new ProfileProperties
+            {
+                TraceLogger = chkTrace.Checked,
+                ComPort = comboBoxComPort.SelectedItem.ToString(),
+                GuideRateArcSecondsPerSecond = double.Parse(txtGuideRate.Text.Trim()),
+                Precision = cboPrecision.SelectedItem.ToString()
+            };
+
+            return profileProperties;
+        }
+
+        private void SetupDialogForm_Shown(object sender, EventArgs e)
+        {
+            Activate();
+        }
+
+        private bool _guideRateValid = true;
+
+        private void TextBox1_TextChanged(object sender, EventArgs e)
+        {
+            //const double SIDRATE = 0.9972695677; //synodic/solar seconds per sidereal second
+            try
+            {
+                double newGuideRate = double.Parse(txtGuideRate.Text.Trim());
+
+                const double siderealArcSecondsPerSecond = 15.041;
+                var percentOfSideReal = (newGuideRate / siderealArcSecondsPerSecond * 100);
+
+                lblPercentOfSiderealRate.Text = $"({percentOfSideReal:00.0}% of sidereal rate)";
+                _guideRateValid = true;
+            }
+            catch (Exception exception)
+            {
+                //Surpressing this exception as if the value is not valid then it's not useful.
+                _guideRateValid = false;
+            }
+
+            UpdateOKButton();
+        }
+
+        private void UpdateOKButton()
+        {
+            cmdOK.Enabled = _guideRateValid && (comboBoxComPort.SelectedItem != null);
+        }
+
+        private void ComboBoxComPort_SelectedValueChanged(object sender, EventArgs e)
+        {
+            UpdateOKButton();
+        }
+    }
+}

Meade.net/SetupDialogForm.designer.cs

@@ -1,4 +1,4 @@
-namespace ASCOM.MeadeAutostar497
+namespace ASCOM.Meade.net
 {
     partial class SetupDialogForm
     {
@@ -28,6 +28,7 @@ namespace ASCOM.MeadeAutostar497
         /// </summary>
         private void InitializeComponent()
         {
+            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(SetupDialogForm));
             this.cmdOK = new System.Windows.Forms.Button();
             this.cmdCancel = new System.Windows.Forms.Button();
             this.label1 = new System.Windows.Forms.Label();
@@ -35,87 +36,110 @@ namespace ASCOM.MeadeAutostar497
             this.label2 = new System.Windows.Forms.Label();
             this.chkTrace = new System.Windows.Forms.CheckBox();
             this.comboBoxComPort = new System.Windows.Forms.ComboBox();
+            this.label3 = new System.Windows.Forms.Label();
+            this.txtGuideRate = new System.Windows.Forms.TextBox();
+            this.label4 = new System.Windows.Forms.Label();
+            this.lblPercentOfSiderealRate = new System.Windows.Forms.Label();
+            this.label5 = new System.Windows.Forms.Label();
+            this.cboPrecision = new System.Windows.Forms.ComboBox();
             ((System.ComponentModel.ISupportInitialize)(this.picASCOM)).BeginInit();
             this.SuspendLayout();
             // 
             // cmdOK
             // 
-            this.cmdOK.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+            resources.ApplyResources(this.cmdOK, "cmdOK");
             this.cmdOK.DialogResult = System.Windows.Forms.DialogResult.OK;
-            this.cmdOK.Location = new System.Drawing.Point(281, 112);
             this.cmdOK.Name = "cmdOK";
-            this.cmdOK.Size = new System.Drawing.Size(59, 24);
-            this.cmdOK.TabIndex = 0;
-            this.cmdOK.Text = "OK";
             this.cmdOK.UseVisualStyleBackColor = true;
-            this.cmdOK.Click += new System.EventHandler(this.cmdOK_Click);
             // 
             // cmdCancel
             // 
-            this.cmdCancel.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+            resources.ApplyResources(this.cmdCancel, "cmdCancel");
             this.cmdCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
-            this.cmdCancel.Location = new System.Drawing.Point(281, 142);
             this.cmdCancel.Name = "cmdCancel";
-            this.cmdCancel.Size = new System.Drawing.Size(59, 25);
-            this.cmdCancel.TabIndex = 1;
-            this.cmdCancel.Text = "Cancel";
             this.cmdCancel.UseVisualStyleBackColor = true;
             this.cmdCancel.Click += new System.EventHandler(this.cmdCancel_Click);
             // 
             // label1
             // 
-            this.label1.Location = new System.Drawing.Point(12, 9);
+            resources.ApplyResources(this.label1, "label1");
             this.label1.Name = "label1";
-            this.label1.Size = new System.Drawing.Size(123, 31);
-            this.label1.TabIndex = 2;
-            this.label1.Text = "Construct your driver\'s setup dialog here.";
             // 
             // picASCOM
             // 
-            this.picASCOM.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
+            resources.ApplyResources(this.picASCOM, "picASCOM");
             this.picASCOM.Cursor = System.Windows.Forms.Cursors.Hand;
-            this.picASCOM.Image = global::ASCOM.MeadeAutostar497.Properties.Resources.ASCOM;
-            this.picASCOM.Location = new System.Drawing.Point(292, 9);
+            this.picASCOM.Image = global::ASCOM.Meade.net.Properties.Resources.ASCOM;
             this.picASCOM.Name = "picASCOM";
-            this.picASCOM.Size = new System.Drawing.Size(48, 56);
-            this.picASCOM.SizeMode = System.Windows.Forms.PictureBoxSizeMode.AutoSize;
-            this.picASCOM.TabIndex = 3;
             this.picASCOM.TabStop = false;
             this.picASCOM.Click += new System.EventHandler(this.BrowseToAscom);
             this.picASCOM.DoubleClick += new System.EventHandler(this.BrowseToAscom);
             // 
             // label2
             // 
-            this.label2.AutoSize = true;
-            this.label2.Location = new System.Drawing.Point(13, 90);
+            resources.ApplyResources(this.label2, "label2");
             this.label2.Name = "label2";
-            this.label2.Size = new System.Drawing.Size(58, 13);
-            this.label2.TabIndex = 5;
-            this.label2.Text = "Comm Port";
             // 
             // chkTrace
             // 
-            this.chkTrace.AutoSize = true;
-            this.chkTrace.Location = new System.Drawing.Point(77, 118);
+            resources.ApplyResources(this.chkTrace, "chkTrace");
             this.chkTrace.Name = "chkTrace";
-            this.chkTrace.Size = new System.Drawing.Size(69, 17);
-            this.chkTrace.TabIndex = 6;
-            this.chkTrace.Text = "Trace on";
             this.chkTrace.UseVisualStyleBackColor = true;
             // 
             // comboBoxComPort
             // 
             this.comboBoxComPort.FormattingEnabled = true;
-            this.comboBoxComPort.Location = new System.Drawing.Point(77, 87);
+            resources.ApplyResources(this.comboBoxComPort, "comboBoxComPort");
             this.comboBoxComPort.Name = "comboBoxComPort";
-            this.comboBoxComPort.Size = new System.Drawing.Size(90, 21);
-            this.comboBoxComPort.TabIndex = 7;
+            this.comboBoxComPort.SelectedValueChanged += new System.EventHandler(this.ComboBoxComPort_SelectedValueChanged);
+            // 
+            // label3
+            // 
+            resources.ApplyResources(this.label3, "label3");
+            this.label3.Name = "label3";
+            // 
+            // txtGuideRate
+            // 
+            resources.ApplyResources(this.txtGuideRate, "txtGuideRate");
+            this.txtGuideRate.Name = "txtGuideRate";
+            this.txtGuideRate.TextChanged += new System.EventHandler(this.TextBox1_TextChanged);
+            // 
+            // label4
+            // 
+            resources.ApplyResources(this.label4, "label4");
+            this.label4.Name = "label4";
+            // 
+            // lblPercentOfSiderealRate
+            // 
+            resources.ApplyResources(this.lblPercentOfSiderealRate, "lblPercentOfSiderealRate");
+            this.lblPercentOfSiderealRate.Name = "lblPercentOfSiderealRate";
+            // 
+            // label5
+            // 
+            resources.ApplyResources(this.label5, "label5");
+            this.label5.Name = "label5";
+            // 
+            // cboPrecision
+            // 
+            this.cboPrecision.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList;
+            this.cboPrecision.FormattingEnabled = true;
+            this.cboPrecision.Items.AddRange(new object[] {
+            resources.GetString("cboPrecision.Items"),
+            resources.GetString("cboPrecision.Items1"),
+            resources.GetString("cboPrecision.Items2")});
+            resources.ApplyResources(this.cboPrecision, "cboPrecision");
+            this.cboPrecision.Name = "cboPrecision";
             // 
             // SetupDialogForm
             // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
+            resources.ApplyResources(this, "$this");
             this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(350, 175);
+            this.Controls.Add(this.cboPrecision);
+            this.Controls.Add(this.label5);
+            this.Controls.Add(this.lblPercentOfSiderealRate);
+            this.Controls.Add(this.label4);
+            this.Controls.Add(this.txtGuideRate);
+            this.Controls.Add(this.label3);
             this.Controls.Add(this.comboBoxComPort);
             this.Controls.Add(this.chkTrace);
             this.Controls.Add(this.label2);
@@ -128,8 +152,7 @@ namespace ASCOM.MeadeAutostar497
             this.MinimizeBox = false;
             this.Name = "SetupDialogForm";
             this.SizeGripStyle = System.Windows.Forms.SizeGripStyle.Hide;
-            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
-            this.Text = "MeadeAutostar497 Setup";
+            this.Shown += new System.EventHandler(this.SetupDialogForm_Shown);
             ((System.ComponentModel.ISupportInitialize)(this.picASCOM)).EndInit();
             this.ResumeLayout(false);
             this.PerformLayout();
@@ -145,5 +168,11 @@ namespace ASCOM.MeadeAutostar497
         private System.Windows.Forms.Label label2;
         private System.Windows.Forms.CheckBox chkTrace;
         private System.Windows.Forms.ComboBox comboBoxComPort;
+        private System.Windows.Forms.Label label3;
+        private System.Windows.Forms.TextBox txtGuideRate;
+        private System.Windows.Forms.Label label4;
+        private System.Windows.Forms.Label lblPercentOfSiderealRate;
+        private System.Windows.Forms.Label label5;
+        private System.Windows.Forms.ComboBox cboPrecision;
     }
 }

Meade.net/SetupDialogForm.resx

@@ -0,0 +1,486 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <assembly alias="System.Windows.Forms" name="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
+  <data name="cmdOK.Anchor" type="System.Windows.Forms.AnchorStyles, System.Windows.Forms">
+    <value>Bottom, Right</value>
+  </data>
+  <assembly alias="System.Drawing" name="System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
+  <data name="cmdOK.Location" type="System.Drawing.Point, System.Drawing">
+    <value>281, 225</value>
+  </data>
+  <data name="cmdOK.Size" type="System.Drawing.Size, System.Drawing">
+    <value>59, 24</value>
+  </data>
+  <assembly alias="mscorlib" name="mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
+  <data name="cmdOK.TabIndex" type="System.Int32, mscorlib">
+    <value>0</value>
+  </data>
+  <data name="cmdOK.Text" xml:space="preserve">
+    <value>OK</value>
+  </data>
+  <data name="&gt;&gt;cmdOK.Name" xml:space="preserve">
+    <value>cmdOK</value>
+  </data>
+  <data name="&gt;&gt;cmdOK.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Button, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;cmdOK.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;cmdOK.ZOrder" xml:space="preserve">
+    <value>12</value>
+  </data>
+  <data name="cmdCancel.Anchor" type="System.Windows.Forms.AnchorStyles, System.Windows.Forms">
+    <value>Bottom, Right</value>
+  </data>
+  <data name="cmdCancel.Location" type="System.Drawing.Point, System.Drawing">
+    <value>281, 255</value>
+  </data>
+  <data name="cmdCancel.Size" type="System.Drawing.Size, System.Drawing">
+    <value>59, 25</value>
+  </data>
+  <data name="cmdCancel.TabIndex" type="System.Int32, mscorlib">
+    <value>1</value>
+  </data>
+  <data name="cmdCancel.Text" xml:space="preserve">
+    <value>Cancel</value>
+  </data>
+  <data name="&gt;&gt;cmdCancel.Name" xml:space="preserve">
+    <value>cmdCancel</value>
+  </data>
+  <data name="&gt;&gt;cmdCancel.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Button, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;cmdCancel.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;cmdCancel.ZOrder" xml:space="preserve">
+    <value>11</value>
+  </data>
+  <data name="label1.Location" type="System.Drawing.Point, System.Drawing">
+    <value>12, 9</value>
+  </data>
+  <data name="label1.Size" type="System.Drawing.Size, System.Drawing">
+    <value>123, 31</value>
+  </data>
+  <data name="label1.TabIndex" type="System.Int32, mscorlib">
+    <value>2</value>
+  </data>
+  <data name="label1.Text" xml:space="preserve">
+    <value>Meade AutoStar and AudioStar generic driver</value>
+  </data>
+  <data name="&gt;&gt;label1.Name" xml:space="preserve">
+    <value>label1</value>
+  </data>
+  <data name="&gt;&gt;label1.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;label1.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;label1.ZOrder" xml:space="preserve">
+    <value>10</value>
+  </data>
+  <data name="picASCOM.Anchor" type="System.Windows.Forms.AnchorStyles, System.Windows.Forms">
+    <value>Top, Right</value>
+  </data>
+  <data name="picASCOM.Location" type="System.Drawing.Point, System.Drawing">
+    <value>292, 9</value>
+  </data>
+  <data name="picASCOM.Size" type="System.Drawing.Size, System.Drawing">
+    <value>48, 56</value>
+  </data>
+  <data name="picASCOM.SizeMode" type="System.Windows.Forms.PictureBoxSizeMode, System.Windows.Forms">
+    <value>AutoSize</value>
+  </data>
+  <data name="picASCOM.TabIndex" type="System.Int32, mscorlib">
+    <value>3</value>
+  </data>
+  <data name="&gt;&gt;picASCOM.Name" xml:space="preserve">
+    <value>picASCOM</value>
+  </data>
+  <data name="&gt;&gt;picASCOM.Type" xml:space="preserve">
+    <value>System.Windows.Forms.PictureBox, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;picASCOM.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;picASCOM.ZOrder" xml:space="preserve">
+    <value>9</value>
+  </data>
+  <data name="label2.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="label2.Location" type="System.Drawing.Point, System.Drawing">
+    <value>13, 90</value>
+  </data>
+  <data name="label2.Size" type="System.Drawing.Size, System.Drawing">
+    <value>58, 13</value>
+  </data>
+  <data name="label2.TabIndex" type="System.Int32, mscorlib">
+    <value>5</value>
+  </data>
+  <data name="label2.Text" xml:space="preserve">
+    <value>Comm Port</value>
+  </data>
+  <data name="&gt;&gt;label2.Name" xml:space="preserve">
+    <value>label2</value>
+  </data>
+  <data name="&gt;&gt;label2.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;label2.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;label2.ZOrder" xml:space="preserve">
+    <value>8</value>
+  </data>
+  <data name="chkTrace.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="chkTrace.Location" type="System.Drawing.Point, System.Drawing">
+    <value>77, 136</value>
+  </data>
+  <data name="chkTrace.Size" type="System.Drawing.Size, System.Drawing">
+    <value>69, 17</value>
+  </data>
+  <data name="chkTrace.TabIndex" type="System.Int32, mscorlib">
+    <value>6</value>
+  </data>
+  <data name="chkTrace.Text" xml:space="preserve">
+    <value>Trace on</value>
+  </data>
+  <data name="&gt;&gt;chkTrace.Name" xml:space="preserve">
+    <value>chkTrace</value>
+  </data>
+  <data name="&gt;&gt;chkTrace.Type" xml:space="preserve">
+    <value>System.Windows.Forms.CheckBox, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;chkTrace.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;chkTrace.ZOrder" xml:space="preserve">
+    <value>7</value>
+  </data>
+  <data name="comboBoxComPort.Location" type="System.Drawing.Point, System.Drawing">
+    <value>77, 87</value>
+  </data>
+  <data name="comboBoxComPort.Size" type="System.Drawing.Size, System.Drawing">
+    <value>90, 21</value>
+  </data>
+  <data name="comboBoxComPort.TabIndex" type="System.Int32, mscorlib">
+    <value>7</value>
+  </data>
+  <data name="&gt;&gt;comboBoxComPort.Name" xml:space="preserve">
+    <value>comboBoxComPort</value>
+  </data>
+  <data name="&gt;&gt;comboBoxComPort.Type" xml:space="preserve">
+    <value>System.Windows.Forms.ComboBox, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;comboBoxComPort.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;comboBoxComPort.ZOrder" xml:space="preserve">
+    <value>6</value>
+  </data>
+  <data name="label3.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="label3.Location" type="System.Drawing.Point, System.Drawing">
+    <value>10, 162</value>
+  </data>
+  <data name="label3.Size" type="System.Drawing.Size, System.Drawing">
+    <value>61, 13</value>
+  </data>
+  <data name="label3.TabIndex" type="System.Int32, mscorlib">
+    <value>8</value>
+  </data>
+  <data name="label3.Text" xml:space="preserve">
+    <value>Guide Rate</value>
+  </data>
+  <data name="&gt;&gt;label3.Name" xml:space="preserve">
+    <value>label3</value>
+  </data>
+  <data name="&gt;&gt;label3.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;label3.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;label3.ZOrder" xml:space="preserve">
+    <value>5</value>
+  </data>
+  <data name="txtGuideRate.Location" type="System.Drawing.Point, System.Drawing">
+    <value>77, 159</value>
+  </data>
+  <data name="txtGuideRate.Size" type="System.Drawing.Size, System.Drawing">
+    <value>46, 20</value>
+  </data>
+  <data name="txtGuideRate.TabIndex" type="System.Int32, mscorlib">
+    <value>9</value>
+  </data>
+  <data name="txtGuideRate.Text" xml:space="preserve">
+    <value>10.0</value>
+  </data>
+  <data name="&gt;&gt;txtGuideRate.Name" xml:space="preserve">
+    <value>txtGuideRate</value>
+  </data>
+  <data name="&gt;&gt;txtGuideRate.Type" xml:space="preserve">
+    <value>System.Windows.Forms.TextBox, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;txtGuideRate.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;txtGuideRate.ZOrder" xml:space="preserve">
+    <value>4</value>
+  </data>
+  <data name="label4.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="label4.Location" type="System.Drawing.Point, System.Drawing">
+    <value>129, 162</value>
+  </data>
+  <data name="label4.Size" type="System.Drawing.Size, System.Drawing">
+    <value>122, 13</value>
+  </data>
+  <data name="label4.TabIndex" type="System.Int32, mscorlib">
+    <value>10</value>
+  </data>
+  <data name="label4.Text" xml:space="preserve">
+    <value>Arc seconds per second</value>
+  </data>
+  <data name="&gt;&gt;label4.Name" xml:space="preserve">
+    <value>label4</value>
+  </data>
+  <data name="&gt;&gt;label4.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;label4.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;label4.ZOrder" xml:space="preserve">
+    <value>3</value>
+  </data>
+  <data name="lblPercentOfSiderealRate.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="lblPercentOfSiderealRate.Location" type="System.Drawing.Point, System.Drawing">
+    <value>129, 175</value>
+  </data>
+  <data name="lblPercentOfSiderealRate.Size" type="System.Drawing.Size, System.Drawing">
+    <value>105, 13</value>
+  </data>
+  <data name="lblPercentOfSiderealRate.TabIndex" type="System.Int32, mscorlib">
+    <value>11</value>
+  </data>
+  <data name="lblPercentOfSiderealRate.Text" xml:space="preserve">
+    <value>(67% of sidereal rate)</value>
+  </data>
+  <data name="&gt;&gt;lblPercentOfSiderealRate.Name" xml:space="preserve">
+    <value>lblPercentOfSiderealRate</value>
+  </data>
+  <data name="&gt;&gt;lblPercentOfSiderealRate.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;lblPercentOfSiderealRate.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;lblPercentOfSiderealRate.ZOrder" xml:space="preserve">
+    <value>2</value>
+  </data>
+  <data name="label5.AutoSize" type="System.Boolean, mscorlib">
+    <value>True</value>
+  </data>
+  <data name="label5.Location" type="System.Drawing.Point, System.Drawing">
+    <value>13, 194</value>
+  </data>
+  <data name="label5.Size" type="System.Drawing.Size, System.Drawing">
+    <value>50, 13</value>
+  </data>
+  <data name="label5.TabIndex" type="System.Int32, mscorlib">
+    <value>12</value>
+  </data>
+  <data name="label5.Text" xml:space="preserve">
+    <value>Precision</value>
+  </data>
+  <data name="&gt;&gt;label5.Name" xml:space="preserve">
+    <value>label5</value>
+  </data>
+  <data name="&gt;&gt;label5.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Label, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;label5.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;label5.ZOrder" xml:space="preserve">
+    <value>1</value>
+  </data>
+  <data name="cboPrecision.Items" xml:space="preserve">
+    <value>Unchanged</value>
+  </data>
+  <data name="cboPrecision.Items1" xml:space="preserve">
+    <value>Low</value>
+  </data>
+  <data name="cboPrecision.Items2" xml:space="preserve">
+    <value>High</value>
+  </data>
+  <data name="cboPrecision.Location" type="System.Drawing.Point, System.Drawing">
+    <value>77, 191</value>
+  </data>
+  <data name="cboPrecision.Size" type="System.Drawing.Size, System.Drawing">
+    <value>90, 21</value>
+  </data>
+  <data name="cboPrecision.TabIndex" type="System.Int32, mscorlib">
+    <value>13</value>
+  </data>
+  <data name="&gt;&gt;cboPrecision.Name" xml:space="preserve">
+    <value>cboPrecision</value>
+  </data>
+  <data name="&gt;&gt;cboPrecision.Type" xml:space="preserve">
+    <value>System.Windows.Forms.ComboBox, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+  <data name="&gt;&gt;cboPrecision.Parent" xml:space="preserve">
+    <value>$this</value>
+  </data>
+  <data name="&gt;&gt;cboPrecision.ZOrder" xml:space="preserve">
+    <value>0</value>
+  </data>
+  <metadata name="$this.Localizable" type="System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>True</value>
+  </metadata>
+  <data name="$this.AutoScaleDimensions" type="System.Drawing.SizeF, System.Drawing">
+    <value>6, 13</value>
+  </data>
+  <data name="$this.ClientSize" type="System.Drawing.Size, System.Drawing">
+    <value>350, 288</value>
+  </data>
+  <data name="$this.StartPosition" type="System.Windows.Forms.FormStartPosition, System.Windows.Forms">
+    <value>CenterScreen</value>
+  </data>
+  <data name="$this.Text" xml:space="preserve">
+    <value>Meade.net Setup</value>
+  </data>
+  <data name="&gt;&gt;$this.Name" xml:space="preserve">
+    <value>SetupDialogForm</value>
+  </data>
+  <data name="&gt;&gt;$this.Type" xml:space="preserve">
+    <value>System.Windows.Forms.Form, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </data>
+</root>

Meade.net/SharedResources.cs

@@ -0,0 +1,389 @@
+//
+// ================
+// Shared Resources
+// ================
+//
+// This class is a container for all shared resources that may be needed
+// by the drivers served by the Local Server. 
+//
+// NOTES:
+//
+//	* ALL DECLARATIONS MUST BE STATIC HERE!! INSTANCES OF THIS CLASS MUST NEVER BE CREATED!
+//
+// Written by:	Bob Denny	29-May-2007
+// Modified by Chris Rowland and Peter Simpson to hamdle multiple hardware devices March 2011
+//
+using System;
+using System.Collections.Generic;
+using ASCOM.Utilities;
+
+namespace ASCOM.Meade.net
+{
+    /// <summary>
+    /// The resources shared by all drivers and devices, in this example it's a serial port with a shared SendMessage method
+    /// an idea for locking the message and handling connecting is given.
+    /// In reality extensive changes will probably be needed.
+    /// Multiple drivers means that several applications connect to the same hardware device, aka a hub.
+    /// Multiple devices means that there are more than one instance of the hardware, such as two focusers.
+    /// In this case there needs to be multiple instances of the hardware connector, each with it's own connection count.
+    /// </summary>
+    public static class SharedResources
+    {
+        // object used for locking to prevent multiple drivers accessing common code at the same time
+        private static readonly object LockObject = new object();
+
+        // Shared serial port. This will allow multiple drivers to use one single serial port.
+        private static Serial _sSharedSerial; // Shared serial port
+
+        //
+        // Public access to shared resources
+        //
+
+        #region single serial port connector
+
+        //
+        // this region shows a way that a single serial port could be connected to by multiple 
+        // drivers.
+        //
+        // Connected is used to handle the connections to the port.
+        //
+        // SendMessage is a way that messages could be sent to the hardware without
+        // conflicts between different drivers.
+        //
+        // All this is for a single connection, multiple connections would need multiple ports
+        // and a way to handle connecting and disconnection from them - see the
+        // multi driver handling section for ideas.
+        //
+
+        /// <summary>
+        /// Shared serial port
+        /// </summary>
+        public static Serial SharedSerial => _sSharedSerial ?? (_sSharedSerial = new Serial());
+
+        /// <summary>
+        /// number of connections to the shared serial port
+        /// </summary>
+        public static int Connections { get; set; } = 0;
+
+        public static void SendBlind(string message)
+        {
+            lock (LockObject)
+            {
+                SharedSerial.ClearBuffers();
+                SharedSerial.Transmit(message);
+            }
+        }
+
+        public static bool SendBool(string message)
+        {
+            SharedSerial.ClearBuffers();
+            return SendChar(message) == "1";
+        }
+
+        /// <summary>
+        /// Example of a shared SendMessage method, the lock
+        /// prevents different drivers tripping over one another.
+        /// It needs error handling and assumes that the message will be sent unchanged
+        /// and that the reply will always be terminated by a "#" character.
+        /// </summary>
+        /// <param name="message"></param>
+        /// <returns></returns>
+        public static string SendString(string message)
+        {
+            lock (LockObject)
+            {
+                SharedSerial.ClearBuffers();
+                SharedSerial.Transmit(message);
+                return SharedSerial.ReceiveTerminated("#").TrimEnd('#');
+            }
+        }
+
+        public static string SendChar(string message)
+        {
+            lock (LockObject)
+            {
+                SharedSerial.ClearBuffers();
+                SharedSerial.Transmit(message);
+                return SharedSerial.ReceiveCounted(1);
+            }
+        }
+
+        public static string ReadTerminated()
+        {
+            lock (LockObject)
+            {
+                return SharedSerial.ReceiveTerminated("#");
+            }
+        }
+
+        public static string ReadCharacters(int throwAwayCharacters)
+        {
+            lock (LockObject)
+            {
+                return SharedSerial.ReceiveCounted(throwAwayCharacters);
+            }
+        }
+
+        /// <summary>
+        /// Example of handling connecting to and disconnection from the
+        /// shared serial port.
+        /// Needs error handling
+        /// the port name etc. needs to be set up first, this could be done by the driver
+        /// checking Connected and if it's false setting up the port before setting connected to true.
+        /// It could also be put here.
+        /// </summary>
+        public static bool Connected
+        {
+            set
+            {
+                lock (LockObject)
+                {
+                    if (value)
+                    {
+                        if (Connections == 0)
+                            SharedSerial.Connected = true;
+                        Connections++;
+                    }
+                    else
+                    {
+                        Connections--;
+                        if (Connections <= 0)
+                        {
+                            SharedSerial.Connected = false;
+                        }
+                    }
+                }
+            }
+            get => SharedSerial.Connected;
+        }
+
+        #endregion
+
+        #region Profile
+
+        private const string DriverId = "ASCOM.MeadeGeneric.Telescope";
+
+        // Constants used for Profile persistence
+        private const string ComPortProfileName = "COM Port";
+        private const string TraceStateProfileName = "Trace Level";
+        private const string GuideRateProfileName = "Guide Rate Arc Seconds Per Second";
+        private const string PrecisionProfileName = "Precision";
+
+        public static void WriteProfile(ProfileProperties profileProperties)
+        {
+            lock (LockObject)
+            {
+                using (Profile driverProfile = new Profile())
+                {
+                    driverProfile.DeviceType = "Telescope";
+                    driverProfile.WriteValue(DriverId, TraceStateProfileName, profileProperties.TraceLogger.ToString());
+                    driverProfile.WriteValue(DriverId, ComPortProfileName, profileProperties.ComPort);
+                    driverProfile.WriteValue(DriverId, GuideRateProfileName, profileProperties.GuideRateArcSecondsPerSecond.ToString());
+                    driverProfile.WriteValue(DriverId, PrecisionProfileName, profileProperties.Precision);
+                }
+            }
+        }
+
+        private const string ComPortDefault = "COM1";
+        private const string TraceStateDefault = "false";
+        private const string GuideRateProfileNameDefault = "10.077939"; //67% of sidereal rate
+        private const string PrecisionDefault = "Unchanged";
+
+        public static ProfileProperties ReadProfile()
+        {
+            lock (LockObject)
+            {
+                ProfileProperties profileProperties = new ProfileProperties();
+                using (Profile driverProfile = new Profile())
+                {
+                    driverProfile.DeviceType = "Telescope";
+                    profileProperties.ComPort = driverProfile.GetValue(DriverId, ComPortProfileName, string.Empty, ComPortDefault);
+                    profileProperties.TraceLogger = Convert.ToBoolean(driverProfile.GetValue(DriverId, TraceStateProfileName, string.Empty, TraceStateDefault));
+                    profileProperties.GuideRateArcSecondsPerSecond = double.Parse(driverProfile.GetValue(DriverId, GuideRateProfileName, string.Empty, GuideRateProfileNameDefault));
+                    profileProperties.Precision = driverProfile.GetValue(DriverId, PrecisionProfileName, string.Empty, PrecisionDefault);
+                }
+
+                return profileProperties;
+            }
+        }
+
+        #endregion
+
+        #region SetupDialog
+
+        public static void SetupDialog()
+        {
+            // consider only showing the setup dialog if not connected
+            // or call a different dialog if connected
+            if (Connections > 0)
+            {
+                System.Windows.Forms.MessageBox.Show("Already connected, please disconnect before altering settings");
+                return;
+            }
+
+            var profileProperties = ReadProfile();
+
+            using (SetupDialogForm f = new SetupDialogForm())
+            {
+                f.SetProfile(profileProperties);
+                
+                var result = f.ShowDialog();
+                if (result == System.Windows.Forms.DialogResult.OK)
+                {
+                    profileProperties = f.GetProfile();
+
+                    WriteProfile(profileProperties); // Persist device configuration values to the ASCOM Profile store
+                }
+            }
+        }
+
+        #endregion
+        
+        #region Multi Driver handling
+
+        public static string ProductName { get; private set; } = string.Empty;
+        public static string FirmwareVersion { get; private set; } = string.Empty;
+
+        // this section illustrates how multiple drivers could be handled,
+        // it's for drivers where multiple connections to the hardware can be made and ensures that the
+        // hardware is only disconnected from when all the connected devices have disconnected.
+
+        // It is NOT a complete solution!  This is to give ideas of what can - or should be done.
+        //
+        // An alternative would be to move the hardware control here, handle connecting and disconnecting,
+        // and provide the device with a suitable connection to the hardware.
+        //
+        /// <summary>
+        /// dictionary carrying device connections.
+        /// The Key is the connection number that identifies the device, it could be the COM port name,
+        /// USB ID or IP Address, the Value is the DeviceHardware class
+        /// </summary>
+        private static readonly Dictionary<string, DeviceHardware> _connectedDevices = new Dictionary<string, DeviceHardware>();
+
+        /// <summary>
+        /// This is called in the driver Connect(true) property,
+        /// it add the device id to the list of devices if it's not there and increments the device count.
+        /// </summary>
+        /// <param name="deviceId"></param>
+        public static void Connect(string deviceId)
+        {
+            lock (LockObject)
+            {
+                if (!_connectedDevices.ContainsKey(deviceId))
+                    _connectedDevices.Add(deviceId, new DeviceHardware());
+                _connectedDevices[deviceId].Count++; // increment the value
+
+                if (deviceId == "Serial")
+                {
+                    if (_connectedDevices[deviceId].Count == 1)
+                    {
+                        var profileProperties = ReadProfile();
+                        SharedSerial.PortName = profileProperties.ComPort;
+                        SharedSerial.DTREnable = false;
+                        SharedSerial.RTSEnable = false;
+                        SharedSerial.DataBits = 8;
+                        SharedSerial.StopBits = SerialStopBits.One;
+                        SharedSerial.Parity = SerialParity.None;
+                        SharedSerial.Speed = SerialSpeed.ps9600;
+                        SharedSerial.Handshake = SerialHandshake.None;
+                        SharedSerial.Connected = true;
+
+                        ProductName = SendString(":GVP#");
+                        FirmwareVersion = SendString(":GVN#");
+                    }
+                }
+            }
+        }
+
+        public static void Disconnect(string deviceId)
+        {
+            lock (LockObject)
+            {
+                if (_connectedDevices.ContainsKey(deviceId))
+                {
+                    _connectedDevices[deviceId].Count--;
+                    if (_connectedDevices[deviceId].Count <= 0)
+                    {
+                        _connectedDevices.Remove(deviceId);
+                        if (deviceId == "Serial")
+                        {
+                            SharedSerial.Connected = false;
+                        }
+                    }
+                }
+            }
+        }
+
+        public static bool IsConnected(string deviceId)
+        {
+            if (_connectedDevices.ContainsKey(deviceId))
+                return (_connectedDevices[deviceId].Count > 0);
+            else
+                return false;
+        }
+
+        #endregion
+
+        public static void Lock(Action action)
+        {
+            lock (LockObject)
+            {
+                action();
+            }
+        }
+
+        public static T Lock<T>(Func<T> func)
+        {
+            lock (LockObject)
+            {
+                return func();
+            }
+        }
+
+        /// <summary>
+        /// Skeleton of a hardware class, all this does is hold a count of the connections,
+        /// in reality extra code will be needed to handle the hardware in some way
+        /// </summary>
+        public class DeviceHardware
+        {
+            private int _count;
+
+            internal int Count
+            {
+                set => _count = value;
+                get => _count;
+            }
+
+            internal DeviceHardware()
+            {
+                Count = 0;
+            }
+        }
+
+        //#region ServedClassName attribute
+        ///// <summary>
+        ///// This is only needed if the driver is targeted at  platform 5.5, it is included with Platform 6
+        ///// </summary>
+        //[global::System.AttributeUsage(AttributeTargets.Class, Inherited = false, AllowMultiple = false)]
+        //public sealed class ServedClassNameAttribute : Attribute
+        //{
+        //    // See the attribute guidelines at 
+        //    //  http://go.microsoft.com/fwlink/?LinkId=85236
+
+        //    /// <summary>
+        //    /// Gets or sets the 'friendly name' of the served class, as registered with the ASCOM Chooser.
+        //    /// </summary>
+        //    /// <value>The 'friendly name' of the served class.</value>
+        //    public string DisplayName { get; private set; }
+        //    /// <summary>
+        //    /// Initializes a new instance of the <see cref="ServedClassNameAttribute"/> class.
+        //    /// </summary>
+        //    /// <param name="servedClassName">The 'friendly name' of the served class.</param>
+        //    public ServedClassNameAttribute(string servedClassName)
+        //    {
+        //        DisplayName = servedClassName;
+        //    }
+        //}
+        //#endregion
+    }
+}

Meade.net/TelescopeList.cs

@@ -0,0 +1,30 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Net.NetworkInformation;
+using System.Text;
+
+namespace ASCOM.Meade.net
+{
+    public static class TelescopeList
+    {
+        #region Autostar 497/Audiostar
+
+        public readonly static string Autostar497 = "Autostar";
+
+        //Autostar/Audiostar firmware revisions
+        public readonly static string Autostar497_30Ee = "30Ee";
+        public readonly static string Autostar497_31Ee = "31Ee";
+        public readonly static string Autostar497_43Eg = "43Eg";
+
+        #endregion
+
+        #region LX200GPS
+
+        public readonly static string LX200GPS = "LX2001";
+
+        public readonly static string LX200GPS_42G = "4.2G";
+
+        #endregion
+    }
+}

Meade.net/Wrapper/SharedResourcesWrapper.cs

@@ -0,0 +1,96 @@
+using System;
+
+namespace ASCOM.Meade.net.Wrapper
+{
+    public interface ISharedResourcesWrapper
+    {
+        void Connect(string deviceId);
+        void Disconnect(string deviceId);
+
+        string ProductName { get; }
+
+        string FirmwareVersion { get; }
+
+        void Lock(Action action);
+        T Lock<T>(Func<T> func);
+
+        string SendString(string message);
+        void SendBlind(string message);
+        string SendChar(string message);
+
+        string ReadTerminated();
+
+        ProfileProperties ReadProfile();
+
+        void SetupDialog();
+        void WriteProfile(ProfileProperties profileProperties);
+        string ReadCharacters(int throwAwayCharacters);
+    }
+
+    public class SharedResourcesWrapper : ISharedResourcesWrapper
+    {
+        public void Connect(string deviceId)
+        {
+            SharedResources.Connect( deviceId);
+        }
+
+        public void Disconnect(string deviceId)
+        {
+            SharedResources.Disconnect(deviceId);
+        }
+
+        public string ProductName => SharedResources.ProductName;
+
+        public string FirmwareVersion => SharedResources.FirmwareVersion;
+
+        public void Lock(Action action)
+        {
+            SharedResources.Lock(action);
+        }
+
+        public T Lock<T>(Func<T> func)
+        {
+            return SharedResources.Lock(func);
+        }
+
+        public string SendString(string message)
+        {
+            return SharedResources.SendString(message);
+        }
+
+        public void SendBlind(string message)
+        {
+            SharedResources.SendBlind(message);
+        }
+
+        public string SendChar(string message)
+        {
+            return SharedResources.SendChar(message);
+        }
+
+        public string ReadTerminated()
+        {
+            return SharedResources.ReadTerminated();
+        }
+
+        public string ReadCharacters(int throwAwayCharacters)
+        {
+            return SharedResources.ReadCharacters(throwAwayCharacters);
+        }
+
+        public ProfileProperties ReadProfile()
+        {
+            return SharedResources.ReadProfile();
+        }
+
+        public void SetupDialog()
+        {
+            SharedResources.SetupDialog();
+        }
+
+        public void WriteProfile(ProfileProperties profileProperties)
+        {
+            SharedResources.WriteProfile(profileProperties);
+        }
+    }
+}

Meade.net/app.config

@@ -0,0 +1,3 @@
+<?xml version="1.0"?>
+<configuration>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup></configuration>

Meade.net/frmMain.Designer.cs

@@ -0,0 +1,63 @@
+using System;
+
+namespace ASCOM.Meade.net
+{
+    partial class FrmMain
+    {
+        /// <summary>
+        /// Required designer variable.
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// Clean up any resources being used.
+        /// </summary>
+        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows Form Designer generated code
+
+        /// <summary>
+        /// Required method for Designer support - do not modify
+        /// the contents of this method with the code editor.
+        /// </summary>
+        private void InitializeComponent()
+        {
+            this.label1 = new System.Windows.Forms.Label();
+            this.SuspendLayout();
+            // 
+            // label1
+            // 
+            this.label1.Location = new System.Drawing.Point(12, 10);
+            this.label1.Name = "label1";
+            this.label1.Size = new System.Drawing.Size(199, 33);
+            this.label1.TabIndex = 0;
+            this.label1.Text = "This is an ASCOM driver, not a program for you to use.";
+            // 
+            // frmMain
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+            this.ClientSize = new System.Drawing.Size(233, 52);
+            this.Controls.Add(this.label1);
+            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedToolWindow;
+            this.Name = "FrmMain";
+            this.Text = "Meade.net Driver Server";
+            this.ResumeLayout(false);
+
+        }
+
+        #endregion
+
+        private System.Windows.Forms.Label label1;
+
+    }
+}
+

Meade.net/frmMain.cs

@@ -0,0 +1,15 @@
+using System.Windows.Forms;
+
+namespace ASCOM.Meade.net
+{
+    public partial class FrmMain : Form
+    {
+        delegate void SetTextCallback(string text);
+
+        public FrmMain()
+        {
+            InitializeComponent();
+        }
+
+    }
+}

Meade.net/frmMain.resx

@@ -112,9 +112,9 @@
     <value>2.0</value>
   </resheader>
   <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
   </resheader>
   <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
   </resheader>
 </root>

Meade.net/packages.config

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="ASCOM.Platform" version="6.4.2" targetFramework="net40" />
+</packages>