c24b4c1161
Initial support of LXD600 mount: no StarPatch, no long format, no park support for this mount.
2025-09-27 11:46:00 +02:00
ColinD
d1ed5558b2
Changes the code a little more
2025-02-18 14:45:12 +00:00
ColinD
56642267b0
Altered the profile read exception handling a little.
2025-02-17 15:37:40 +00:00
ColinD
8521b3e2d2
Added ability to override the 5 second serial timeout with your own value.
2025-01-08 16:13:46 +00:00
ColinD
e7e216597a
Changing the recieve timeout to 30 seconds, as a test
2025-01-01 17:19:34 +00:00
ColinD
0afb80bd70
Fixed problem where the telescope area was in mm when it should be mm squared. And the driver was incorrect by a factor of 1000.
2024-12-01 22:42:19 +00:00
ColinD
c673e0c7d6
. doing the trim of the trailing # after writing the log message.
...
. for LX800 scopes, trying to use a send string instead of send chars for GW command.
2023-02-18 22:37:47 +00:00
ColinD
4b78d8fb4f
Added code to check for LX200GPS firmware version 4G0m which does not support the GW command.
2022-12-31 22:03:39 +00:00
ColinD
888ab1aa46
Added LX800 series to scope as an autostar II based telescope.
2022-11-12 20:50:48 +00:00
ColinD
febf52738e
Set the path to open the logs folder properly
2022-11-10 20:31:30 +00:00
ColinD
3ffa9fbe8b
Nuget package updates
2022-11-10 17:57:45 +00:00
ColinD
e851fd0e01
Adding support for Audiostar to be returned as a Synonym of Autostar for GW detection.
2022-09-25 17:04:24 +01:00
ColinD
349397b70f
Fixed logging message
2022-07-25 21:57:52 +01:00
ColinD
9666811eff
Added messages to include information about what is being sent via the serial port.
2022-07-25 16:08:50 +01:00
ColinD
7287990240
Added messages to include information about what is being sent via the serial port.
2022-07-25 16:07:55 +01:00
ColinD
6428e6d31b
Added the tracelogger to the calls that send the actual serial commands.
2022-07-25 15:53:29 +01:00
ColinD
0fbb2331cf
Added unit tests to show that StarPatch firmware can attempt pulse guide
2022-07-19 18:42:34 +01:00
ColinD
5f75916116
Added support for RCX400 using newer pulse guiding commands.
...
Refactored the connect set to be a little less cluttered.
2022-07-16 14:17:39 +01:00
ColinD
650fc04bca
Changing how side of pier is calculated.
2022-05-16 18:59:55 +01:00
ColinD
ebca231d9a
Made sure that the alignment mode is preserved when parked, across sessions.
2022-05-08 15:15:30 +01:00
ColinD
2b5205d9c5
I think this will allow the LX200Classic to unpark
2022-05-08 14:46:53 +01:00
ColinD
ede7c33302
Added Alt Az coordinates to the connected message.
2022-05-08 13:00:05 +01:00
ColinD
35a76fe52c
Merged in feature/PortSpeed (pull request #40 )
...
Feature/PortSpeed
* Added support for changing the speed of the autostar
* Added support for changing the speed of the autostar
* Merge remote-tracking branch 'origin/feature/PortSpeed' into feature/PortSpeed
* Upgraded unit testing to make sure that speed changes are properly tested
2022-05-08 11:52:45 +00:00
ColinD
f788320927
Refactor to use ProfileProperties instead of assigning individual variables.
...
Added support for ApertureArea and ApertureDiameter
2022-05-03 21:57:25 +01:00
ColinD
dc68bb0b4c
Added Focal Length property to telescope setup screen
2022-04-28 23:55:35 +01:00
ColinD
df7dfb7c04
Modified the implementation of side of pier support detection. Hopefully will now,
...
Added extra checking to ensure that a slew cannot be started whilst a slew is in progress.
2021-12-11 19:10:18 +00:00
ColinD
f4c26d777b
Added more logging around the tracking rates.
...
Corrected the Command logged messages to use the correct info.
Added a try catch to the setup dialog to see if an error occurs to give a better message.
2021-08-03 21:55:06 +01:00
77c87a51fa
Moved IsGuiding to SharedResourcesWrapper
2021-06-28 13:03:07 +10:00
631aa91d94
Moved IsTargetCoordinateInitRequired to SharedResourcesWrapper
2021-06-28 12:53:05 +10:00
90713de34b
Moved parked SiteLat/Long to ParkedPosition data
2021-06-28 12:45:26 +10:00
a3408a86c3
Update unit tests to support GW command
...
SideOfPier also supports German EQ
2021-06-27 19:16:39 +10:00
6c27499769
Create generic ThreadSafeValue
2021-06-23 16:21:08 +10:00
6fc476b031
Make further properties multi-client and thread-safe
...
Move MovingPrimary, MovingSecondary, EarliestNonSlewingTime to
SharedResources, make all new properties thread-safe (atomic)
operations.
2021-06-22 17:21:21 +10:00
6c769f3649
Add SlewSettleTime and IsLongFormat to SharedResources interface
...
Also ensure that digit precision is set during initialisation
2021-06-12 20:09:51 +10:00
1684bd60bd
Move SideOfPier, TargetRA/DEC properties to SharedResourcesWrapper
...
This change allows several instances of the driver to be in sync
w.r.t. TargetRightAscension, TargetDeclination and SideOfPier
2021-06-12 15:47:34 +10:00
ColinD
486a9205ee
Fixed the defect when one instance of the driver gets parked, the info is shared to the other instances.
2021-04-27 22:08:25 +01:00
ColinD
70e615bb4e
Made sure that CommandString, CommandBool and CommandBlind work as expected, complete with Raw and non raw support. (Implementation is the same as one of the LX200 drivers.)
2021-04-26 20:51:41 +01:00
ColinD
e32c2aa50a
Sorted out some code inspection issues
2021-04-25 20:16:07 +01:00
ColinD
c6b54e273d
Added unit testing for bypass feature, and setting the date on first connection
2021-04-25 18:27:44 +01:00
ColinD
7eec6c0008
Fixed some issued with the telescope parking and unparking. Now reports reported correctly for the LX200GPS, and Autostars
2021-04-24 22:29:11 +01:00
ColinD
18ea52c972
Impemented the code changes to return co-ordinated when the telescope is parked.
...
Also added loads of checks for if the telescope is parked.
2021-04-24 20:52:21 +01:00
ColinD
fdd008fcfb
Adding support for sending co-ordinates when scope is parked.
2021-04-24 19:16:36 +01:00
ColinD
eaeae4d66b
Combined the skip prompts and set date time code, to just one check box.
2021-04-24 13:16:08 +01:00
ColinD
aca01de4ee
Added a # prefix before the commands.
2021-04-23 19:45:10 +01:00
ColinD
e4af93dd07
Added ability to skip the prompts initial connect, and added ability to send the date and time on initial connect
2021-04-21 20:17:00 +01:00
ColinD
d0f12a604a
Made the new serial options dropdownLists to help avoid ID10T errors.
2021-04-09 21:35:19 +01:00
ColinD
178ef8b11d
Fixed the dataBits profile name, and upgraded the sharedresources unit tests for the new comport settings.
2021-04-09 20:43:12 +01:00
ColinD
bf6203d901
Added support for setting all serial properties.
2021-04-09 19:57:43 +01:00
ColinD
51bf99cb8c
Started adding full serial port settings, so that people can do crazy things at their own risk.
2021-04-09 12:54:25 +01:00
ColinD
9dde0d9e81
Another code inspection.
2021-03-02 13:49:02 +00:00
Olivier Balitch
ColinD