Astronomy/MeadeGeneric
1
0
Fork 0
Code Pull Requests Wiki Activity
Files
feature/DisableIntroPromptByPass
MeadeGeneric/ASCOM.MeadeGeneric.Telescope.Validation.txt
T
ColinD 58ba1e6ee3 Merged in develop (pull request #6) 
Release 0.5.0.0

* Removed unwanted files

* Adding git ignore file

* Started working on getting the basic communications with the scope working.
    Working on routines to get and set the date and time in the handbox.

* Switched the serial port over to using the .net frameworks serial port.
    Extracted the serial port into it's own class and created a simpler command processing mechanism.

* Implemented AbortSlew and did some code tidy up.

* Forced all code to 64-bit only, will make this 32/64 bit before release.
    Fixed issue in the SerialProcessor when setting the time, makes sure that there's no chance of thread stealing when pulling out the junk messages
    Added ConformanceResult.txt to show the progress of the driver development

* Added code for the site latitude
    and started work on the longitude.

* Added unit tests for reading and writing the utcDate.
    Fixed a couple of defects in the code that was setting the utcDate.

* Corrected Longitude value range

* Added support for UTC offset.

* Pulse guiding support added

* Added SiteLatitude unit tests

* Added unit tests for SiteLongitude

* Added unit tests for the new Pulse guide implementation.

* Added support for AlignmentMode

* Added support for AtPark and Park

* Added support for parking the scope
    Added support for reading the scope Azimuth

* Added support for reading Declination

* Added 5 second timeout for the serial port.
    Fixed problem with the GW command not working on the Autostar 497.

* Fixed broken unit test

* Added support for altitude

* Tidying up resharper warinings

* Implemented RightAscension
    TargetRightAscension
    TargetDec
    SlewToCoord
    and SlewToCoordAsync

* Sorted out the target RA and Dec exceptions to be compliant with ascom.

* Implemented SlewToAltAz and SlewToAltAzAsync

* Implemented SyncToTarget functionality

* Implemented slew to target

* Added support for MoveAxis

* Added support for tracking rate

* Added IFocuserV3 to the driver and made sure that it's registered for ASCOM as a focuser as well.

* Fixed issue with Target RA and Dec loosing precision

* Telescope driver now passes the Ascom conformance.

* Upgraded driver version to 0.1

* Added explicit locks around all sequences of commands.

* Basic implementation of the IFocusserV3

* Focuser passes validation, this makes the code V0.2

* Added support for CommandBlind and CommandString
    Modified the tracking rates to be setable.  However, the get is now simulated.

* Merged in feature/LocalServer (pull request #5)

    Feature/LocalServer

    * Major refactor.  Switching over to a local server hub style driver allowing multiple programs to control the telescope at one time without the need for the POTH Hub

    * Unified the setup dialog

    * Implemented shared serial port, Both Telescope and Driver can connect at the same time.

    * Ported the focuser implementation from the non server based version.

    * Ported the telescope driver code.

    * Fixed problem with # not being stripped from the returned string ends. Fixed issue with RA being returned as degress rather than hours.

    * Telescope passes validation

    * Added a lock around the focuser move.

    * Reimplemented CommandBlind and CommandString

    * Corrected version information

    * Removed the Altitude support as there's a bug in the Autostar and Audiostar firmware

* Added comments for all meade commands.
    Fixed the Site Lat and Long setters

* Re instated the Altitude value and ran conformance for both the telescope and focuser.

* Redesigned the Altitude and Azimuth readings to use the Right Ascension and Declination co-ordinates and perform the transformation using the date and site details from the scope.   This will correct the problem of the Altitude reading from the handset being incorrect.

* Added code to make sure that the scope returns values in high precision mode.

* Fixed problem where SlewToAltAz didn't work correctly.  Now uses the RA/Dec slew for everything, and converts the values as needed.

* Upgraded the error handling to ensure that all serial commands are executed after checking that there is a connection open.

* Added some code to the focuser connect to make it consistent with the telescope connect in that it will now test that the connection is to an Autostar.

    Upgraded the move code to make it less unreliable.

* Added localisation support

* First draft of the installer

* Sorted out the registry settings needed to get the driver working properly on install.

* Modified the solution to be able to create as 32-bit install that works on 64bit windows 10.

* Added a call to activate when the setup dialog is shown.
2019-06-04 19:06:57 +00:00

270 lines
25 KiB
Plaintext
Raw Permalink Blame History

Conform Report Hash (V1): EE943505837FAD1E4F4998D567C304701AB845611D748A5A9517BF10842F951F5DD946834D8E59B5E7B84C7C067D24F52AC1C4F7E4A879A7CDAF4AB7BFEF8BB4
ConformanceCheck ASCOM Device Conformance Checker Version 6.4.63.0, Build time: 18/12/2018 08:58:32
ConformanceCheck Running on: ASCOM Platform 6.4 SP1 6.4.1.2695
ConformanceCheck Driver ProgID: ASCOM.MeadeGeneric.Telescope
Error handling
Error number for "Not Implemented" is: 80040400
Error number for "Invalid Value 1" is: 80040401
Error number for "Invalid Value 2" is: 80040405
Error number for "Value Not Set 1" is: 80040402
Error number for "Value Not Set 2" is: 80040403
Error messages will not be interpreted to infer state.
19:18:57.428 Driver Access Checks OK
19:18:58.079 AccessChecks OK Successfully created driver using late binding
19:18:58.893 AccessChecks OK Successfully connected using late binding
19:18:58.898 AccessChecks INFO The driver is a .NET object
19:18:58.903 AccessChecks INFO The AssemblyQualifiedName is: ASCOM.Meade.net.Telescope, ASCOM.Meade.net.Telescope, Version=0.4.0.0, Cultu
19:18:58.907 AccessChecks INFO The driver implements interface: ASCOM.DeviceInterface.ITelescopeV3
19:18:59.617 AccessChecks INFO Device does not expose interface ITelescopeV2
19:19:00.617 AccessChecks INFO Device exposes interface ITelescopeV3
19:19:01.929 AccessChecks OK Successfully created driver using driver access toolkit
19:19:02.635 AccessChecks OK Successfully connected using driver access toolkit
Conform is using ASCOM.DriverAccess.Telescope to get a Telescope object
19:19:03.962 ConformanceCheck OK Driver instance created successfully
19:19:04.542 ConformanceCheck OK Connected OK
Common Driver Methods
19:19:04.582 InterfaceVersion OK 3
19:19:04.611 Connected OK True
19:19:04.640 Description OK Meade Generic
19:19:04.668 DriverInfo OK Information about the driver itself. Version: 0.4
19:19:04.696 DriverVersion OK 0.4
19:19:04.724 Name OK Meade Generic
19:19:04.753 CommandString INFO Conform cannot test the CommandString method
19:19:04.758 CommandBlind INFO Conform cannot test the CommandBlind method
19:19:04.765 CommandBool INFO Conform cannot test the CommandBool method
19:19:04.771 Action INFO Conform cannot test the Action method
19:19:04.778 SupportedActions OK Driver returned an empty action list
Can Properties
19:19:04.843 CanFindHome OK False
19:19:04.850 CanPark OK True
19:19:04.858 CanPulseGuide OK True
19:19:04.866 CanSetDeclinationRate OK False
19:19:04.874 CanSetGuideRates OK False
19:19:04.881 CanSetPark OK False
19:19:04.889 CanSetPierSide OK False
19:19:04.923 CanSetRightAscensionRate OK False
19:19:04.932 CanSetTracking OK True
19:19:04.939 CanSlew OK True
19:19:04.947 CanSlewltAz OK True
19:19:04.954 CanSlewAltAzAsync OK True
19:19:04.962 CanSlewAsync OK True
19:19:04.971 CanSync OK True
19:19:04.979 CanSyncAltAz OK False
19:19:04.990 CanUnPark OK False
Pre-run Checks
19:19:05.040 Mount Safety INFO Scope is not parked, continuing testing
19:19:05.070 Mount Safety INFO Scope tracking has been enabled
19:19:05.100 TimeCheck INFO PC Time Zone: GMT Summer Time, offset -1 hours.
19:19:05.108 TimeCheck INFO PC UTCDate: 19-May-2019 18:19:05.108
19:19:05.604 TimeCheck INFO Mount UTCDate: 19-May-2019 18:18:16.000
Properties
19:19:05.689 AlignmentMode OK algPolar
19:19:06.820 Altitude OK 50.09
19:19:06.854 ApertureArea OK Optional member threw a PropertyNotImplementedException exception.
19:19:06.886 ApertureDiameter OK Optional member threw a PropertyNotImplementedException exception.
19:19:06.920 AtHome OK False
19:19:06.952 AtPark OK False
19:19:07.636 Azimuth OK 150.49
19:19:07.938 Declination OK 16:49:00.00
19:19:07.971 DeclinationRate Read OK 0.00
19:19:08.003 DeclinationRate Write OK CanSetDeclinationRate is False and a PropertyNotImplementedException exception was generated as expected
19:19:08.037 DoesRefraction Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.071 DoesRefraction Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.104 EquatorialSystem OK equLocalTopocentric
19:19:08.136 FocalLength OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.169 GuideRateDeclination Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.179 GuideRateDeclination Write OK CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
19:19:08.212 GuideRateRightAscension Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.223 GuideRateRightAscension Write OK CanSetGuideRates is False and a PropertyNotImplementedException exception was generated as expected
19:19:08.257 IsPulseGuiding OK False
19:19:08.539 RightAscension OK 11:16:48.00
19:19:08.572 RightAscensionRate Read OK 0.00
19:19:08.605 RightAscensionRate Write OK CanSetRightAscensionRate is False and a PropertyNotImplementedException exception was generated as expected
19:19:08.639 SiteElevation Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.675 SiteElevation Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.687 SiteElevation Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.698 SiteElevation Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:08.758 SiteLatitude Read OK 53:48:00.00
19:19:08.793 SiteLatitude Write OK Invalid Value exception generated as expected on set site latitude < -90 degrees
19:19:08.808 SiteLatitude Write OK Invalid Value exception generated as expected on set site latitude > 90 degrees
19:19:08.973 SiteLatitude Write OK Legal value 53:48:00.00 degrees written successfully
19:19:09.052 SiteLongitude Read OK -01:47:00.00
19:19:09.088 SiteLongitude Write OK Invalid Value exception generated as expected on set site longitude < -180 degrees
19:19:09.100 SiteLongitude Write OK Invalid Value exception generated as expected on set site longitude > 180 degrees
19:19:09.267 SiteLongitude Write OK Legal value -01:47:00.00 degrees written successfully
19:19:09.326 Slewing OK False
19:19:09.361 SlewSettleTime Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:09.400 SlewSettleTime Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:09.413 SlewSettleTime Write OK Optional member threw a PropertyNotImplementedException exception.
19:19:09.447 SideOfPier Read OK Optional member threw a PropertyNotImplementedException exception.
19:19:09.493 SiderealTime OK 10:00:32.13
19:19:09.505 SiderealTime OK Scope and ASCOM sidereal times agree to better than 2 seconds, Scope: 10:00:32.13, ASCOM: 10:00:33.22
19:19:09.540 TargetDeclination Read OK .NET Not InvalidOperationException generated on read before write
19:19:09.575 TargetDeclination Write INFO Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
19:19:09.588 TargetRightAscension Read OK .NET Not InvalidOperationException generated on read before write
19:19:09.623 TargetRightAscension Write INFO Tests moved after the SlewToCoordinates tests so that Conform can check they properly set target coordinates.
19:19:09.635 Tracking Read OK True
19:19:10.697 Tracking Write OK False
19:19:11.759 TrackingRates Found drive rate: driveSidereal
19:19:11.772 TrackingRates Found drive rate: driveLunar
19:19:11.784 TrackingRates OK Drive rates read OK
19:19:11.797 TrackingRates OK Disposed tracking rates OK
19:19:11.832 TrackingRates OK Successfully obtained a TrackingRates object after the previous TrackingRates object was disposed
19:19:11.858 TrackingRate Read OK driveSidereal
19:19:11.893 TrackingRate Write OK Successfully set drive rate: driveSidereal
19:19:11.928 TrackingRate Write OK Successfully set drive rate: driveLunar
19:19:12.073 UTCDate Read OK 19-May-2019 18:18:23.000
19:19:13.628 UTCDate Write OK New UTCDate written successfully: 19/05/2019 19:18:23
Methods
19:19:15.180 CanMoveAxis:Primary OK CanMoveAxis:Primary True
19:19:15.218 CanMoveAxis:Secondary OK CanMoveAxis:Secondary True
19:19:15.255 CanMoveAxis:Tertiary OK CanMoveAxis:Tertiary False
19:19:15.292 Park/Unpark INFO Tests skipped
19:19:15.311 AbortSlew OK AbortSlew OK when not slewing
19:19:15.376 AxisRate:Primary OK Axis rate minimum: 1 Axis rate maximum: 1
19:19:15.390 AxisRate:Primary OK Axis rate minimum: 2 Axis rate maximum: 2
19:19:15.404 AxisRate:Primary OK Axis rate minimum: 3 Axis rate maximum: 3
19:19:15.417 AxisRate:Primary OK Axis rate minimum: 4 Axis rate maximum: 4
19:19:15.430 AxisRate:Primary OK No overlapping axis rates found
19:19:15.442 AxisRate:Primary OK No duplicate axis rates found
19:19:15.454 AxisRate:Primary OK Successfully disposed of rate 1 - 1
19:19:15.468 AxisRate:Primary OK Successfully disposed of rate 2 - 2
19:19:15.480 AxisRate:Primary OK Successfully disposed of rate 3 - 3
19:19:15.492 AxisRate:Primary OK Successfully disposed of rate 4 - 4
19:19:15.505 AxisRate:Primary OK Disposed axis rates OK
19:19:15.518 AxisRate:Secondary OK Axis rate minimum: 1 Axis rate maximum: 1
19:19:15.533 AxisRate:Secondary OK Axis rate minimum: 2 Axis rate maximum: 2
19:19:15.546 AxisRate:Secondary OK Axis rate minimum: 3 Axis rate maximum: 3
19:19:15.559 AxisRate:Secondary OK Axis rate minimum: 4 Axis rate maximum: 4
19:19:15.571 AxisRate:Secondary OK No overlapping axis rates found
19:19:15.585 AxisRate:Secondary OK No duplicate axis rates found
19:19:15.599 AxisRate:Secondary OK Successfully disposed of rate 1 - 1
19:19:15.612 AxisRate:Secondary OK Successfully disposed of rate 2 - 2
19:19:15.625 AxisRate:Secondary OK Successfully disposed of rate 3 - 3
19:19:15.638 AxisRate:Secondary OK Successfully disposed of rate 4 - 4
19:19:15.652 AxisRate:Secondary OK Disposed axis rates OK
19:19:15.667 AxisRate:Tertiary OK Empty axis rate returned
19:19:15.680 AxisRate:Tertiary OK Disposed axis rates OK
19:19:15.697 FindHome OK CanFindHome is False and a MethodNotImplementedException exception was generated as expected
19:19:15.745 MoveAxis Primary OK Can successfully set a movement rate of zero
19:19:15.761 MoveAxis Primary OK Exception correctly generated when move axis is set below lowest rate (0.5)
19:19:15.800 MoveAxis Primary OK Exception correctly generated when move axis is set above highest rate (5)
19:19:19.972 MoveAxis Primary OK Successfully moved axis at minimum rate: 1
19:19:24.750 MoveAxis Primary OK Successfully moved axis at maximum rate: 4
19:19:28.925 MoveAxis Primary OK Tracking state correctly retained for both tracking states
19:19:28.941 MoveAxis Primary OK AxisRates object successfully disposed
19:19:29.002 MoveAxis Secondary OK Can successfully set a movement rate of zero
19:19:29.018 MoveAxis Secondary OK Exception correctly generated when move axis is set below lowest rate (0.5)
19:19:29.055 MoveAxis Secondary OK Exception correctly generated when move axis is set above highest rate (5)
19:19:33.266 MoveAxis Secondary OK Successfully moved axis at minimum rate: 1
19:19:38.191 MoveAxis Secondary OK Successfully moved axis at maximum rate: 4
19:19:42.366 MoveAxis Secondary OK Tracking state correctly retained for both tracking states
19:19:42.384 MoveAxis Secondary OK AxisRates object successfully disposed
19:19:42.447 MoveAxis Tertiary OK CanMoveAxis Tertiary is False and a MethodNotImplementedException exception was generated as expected
19:19:44.487 PulseGuide OK Synchronous pulse guide found OK
19:20:06.507 SlewToCoordinates INFO Slewed within 175.3 arc seconds of expected RA: 09:01:07.31, actual RA: 09:01:19.00
19:20:06.522 SlewToCoordinates INFO Slewed within 82.0 arc seconds of expected DEC: 01:00:00.00, actual DEC: 01:01:22.00
19:20:06.537 SlewToCoordinates OK The TargetRightAscension property 09:01:07.31 matches the expected RA OK.
19:20:06.550 SlewToCoordinates OK The TargetDeclination property 01:00:00.00 matches the expected Declination OK.
19:20:06.591 SlewToCoordinates (Bad L) OK Correctly rejected bad RA coordinate: -01:00:00.00
19:20:06.856 SlewToCoordinates (Bad L) OK Correctly rejected bad Dec coordinate: -100:00:00.00
19:20:06.920 SlewToCoordinates (Bad H) OK Correctly rejected bad RA coordinate: 25:00:00.00
19:20:07.224 SlewToCoordinates (Bad H) OK Correctly rejected bad Dec coordinate: 100:00:00.00
19:20:25.860 SlewToCoordinatesAsync INFO Slewed within 178.3 arc seconds of expected RA: 08:01:30.11, actual RA: 08:01:42.00
19:20:25.876 SlewToCoordinatesAsync INFO Slewed within 64.0 arc seconds of expected DEC: 02:00:00.00, actual DEC: 01:58:56.00
19:20:25.890 SlewToCoordinatesAsync OK The TargetRightAscension property 08:01:30.11 matches the expected RA OK.
19:20:25.904 SlewToCoordinatesAsync OK The TargetDeclination property 02:00:00.00 matches the expected Declination OK.
19:20:25.945 SlewToCoordinatesAsync (Bad L) OK Correctly rejected bad RA coordinate: -01:00:00.00
19:20:26.201 SlewToCoordinatesAsync (Bad L) OK Correctly rejected bad Dec coordinate: -100:00:00.00
19:20:26.263 SlewToCoordinatesAsync (Bad H) OK Correctly rejected bad RA coordinate: 25:00:00.00
19:20:26.567 SlewToCoordinatesAsync (Bad H) OK Correctly rejected bad Dec coordinate: 100:00:00.00
19:20:47.987 SyncToCoordinates INFO Slewed to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
19:20:48.003 SyncToCoordinates OK Slewed to start position OK. DEC: 26:54:00.00
19:20:49.265 SyncToCoordinates INFO Synced to sync position within 25.3 arc seconds of expected RA: 06:57:49.69, actual RA: 06:57:48.00
19:20:49.282 SyncToCoordinates OK Synced to sync position OK. DEC: 25:54:00.00
19:20:49.301 SyncToCoordinates OK The TargetRightAscension property 06:57:49.69 matches the expected RA OK.
19:20:49.316 SyncToCoordinates OK The TargetDeclination property 25:54:00.00 matches the expected Declination OK.
19:21:05.202 SyncToCoordinates INFO Slewed back to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
19:21:05.217 SyncToCoordinates OK Slewed back to start position OK. DEC: 26:54:00.00
19:21:06.337 SyncToCoordinates INFO Synced to reversed sync position within 40.3 arc seconds of expected RA: 07:05:49.69, actual RA: 07:05:47.00
19:21:06.353 SyncToCoordinates OK Synced to reversed sync position OK. DEC: 27:54:00.00
19:21:22.444 SyncToCoordinates INFO Slewed back to start position within 25.3 arc seconds of expected RA: 07:01:49.69, actual RA: 07:01:48.00
19:21:22.459 SyncToCoordinates OK Slewed back to start position OK. DEC: 26:54:00.00
19:21:22.502 SyncToCoordinates (Bad L) OK Correctly rejected bad RA coordinate: -01:00:00.00
19:21:22.620 SyncToCoordinates (Bad L) OK Correctly rejected bad Dec coordinate: -100:00:00.00
19:21:22.682 SyncToCoordinates (Bad H) OK Correctly rejected bad RA coordinate: 25:00:00.00
19:21:23.379 SyncToCoordinates (Bad H) OK Correctly rejected bad Dec coordinate: 100:00:00.00
19:21:23.439 TargetRightAscension Write OK Invalid Value exception generated as expected on set TargetRightAscension < 0 hours
19:21:23.454 TargetRightAscension Write OK Invalid Value exception generated as expected on set TargetRightAscension > 24 hours
19:21:23.670 TargetRightAscension Write OK Legal value 06:02:46.50 HH:MM:SS written successfully
19:21:23.709 TargetDeclination Write OK Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
19:21:23.724 TargetDeclination Write OK Invalid Value exception generated as expected on set TargetDeclination < -90 degrees
19:21:23.918 TargetDeclination Write OK Legal value 01:00:00.00 DD:MM:SS written successfully
19:21:44.377 SlewToTarget INFO Slewed within 44.9 arc seconds of expected RA: 07:02:46.99, actual RA: 07:02:44.00
19:21:44.392 SlewToTarget OK Slewed OK. DEC: 03:00:00.00
19:21:44.421 SlewToTarget OK The TargetRightAscension property 07:02:46.99 matches the expected RA OK.
19:21:44.435 SlewToTarget OK The TargetDeclination property 03:00:00.00 matches the expected Declination OK.
19:21:44.476 SlewToTarget (Bad L) OK Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
19:21:44.565 SlewToTarget (Bad L) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
19:21:44.627 SlewToTarget (Bad H) OK Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
19:21:44.713 SlewToTarget (Bad H) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
19:22:05.987 SlewToTargetAsync INFO Slewed within 58.0 arc seconds of expected RA: 06:03:07.87, actual RA: 06:03:04.00
19:22:06.002 SlewToTargetAsync OK Slewed OK. DEC: 04:00:00.00
19:22:06.016 SlewToTargetAsync OK The TargetRightAscension property 06:03:07.87 matches the expected RA OK.
19:22:06.030 SlewToTargetAsync OK The TargetDeclination property 04:00:00.00 matches the expected Declination OK.
19:22:06.071 SlewToTargetAsync (Bad L) OK Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
19:22:06.134 SlewToTargetAsync (Bad L) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
19:22:06.200 SlewToTargetAsync (Bad H) OK Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
19:22:06.281 SlewToTargetAsync (Bad H) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
19:22:06.341 DestinationSideOfPier Test skipped as AligmentMode is not German Polar
19:22:36.522 SlewToAltAz INFO Slewed to within 00:11:23.03 DD:MM:SS of expected Azimuth: 150:00:00.00
19:22:36.539 SlewToAltAz INFO Slewed to within 00:02:05.06 DD:MM:SS of expected Altitude: 50:00:00.00
19:22:36.581 SlewToAltAz (Bad L) OK Correctly rejected bad Altitude coordinate: -100:00:00.00
19:22:36.599 SlewToAltAz (Bad L) OK Correctly rejected bad Azimuth coordinate: -10:00:00.00
19:22:36.662 SlewToAltAz (Bad H) OK Correctly rejected bad Altitude coordinate: 100:00:00.00
19:22:36.681 SlewToAltAz (Bad H) OK Correctly rejected bad Azimuth coordinate: 370:00:00.00
19:22:57.713 SlewToAltAzAsync INFO Slewed to within 00:09:16.99 DD:MM:SS of expected Azimuth: 155:00:00.00
19:22:57.728 SlewToAltAzAsync INFO Slewed to within 00:00:28.11 DD:MM:SS of expected Altitude: 55:00:00.00
19:22:57.770 SlewToAltAzAsync (Bad L) OK Correctly rejected bad Altitude coordinate: -100:00:00.00
19:22:57.789 SlewToAltAzAsync (Bad L) OK Correctly rejected bad Azimuth coordinate: -10:00:00.00
19:22:57.851 SlewToAltAzAsync (Bad H) OK Correctly rejected bad Altitude coordinate: 100:00:00.00
19:22:57.870 SlewToAltAzAsync (Bad H) OK Correctly rejected bad Azimuth coordinate: 370:00:00.00
19:23:22.572 SyncToTarget OK Slewed to start position OK. RA: 07:04:21.38
19:23:22.588 SyncToTarget OK Slewed to start position OK. DEC: 26:54:00.00
19:23:24.332 SyncToTarget INFO Synced to sync position within 20.7 arc seconds of expected RA: 07:00:21.38, actual RA: 07:00:20.00
19:23:24.347 SyncToTarget OK Synced to sync position OK. DEC: 25:54:00.00
19:23:42.234 SyncToTarget INFO Slewed back to start position within 20.7 arc seconds of expected RA: 07:04:21.38, actual RA: 07:04:20.00
19:23:42.250 SyncToTarget OK Slewed back to start position OK. DEC: 26:54:00.00
19:23:43.530 SyncToTarget INFO Synced to reversed sync position within 35.7 arc seconds of expected RA: 07:08:21.38, actual RA: 07:08:19.00
19:23:43.546 SyncToTarget OK Synced to reversed sync position OK. DEC: 27:54:00.00
19:23:59.445 SyncToTarget INFO Slewed back to start position within 20.7 arc seconds of expected RA: 07:04:21.38, actual RA: 07:04:20.00
19:23:59.460 SyncToTarget OK Slewed back to start position OK. DEC: 26:54:00.00
19:23:59.500 SyncToTarget (Bad L) OK Telescope.TargetRA correctly rejected bad RA coordinate: -01:00:00.00
19:23:59.656 SyncToTarget (Bad L) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: -100:00:00.00
19:23:59.716 SyncToTarget (Bad H) OK Telescope.TargetRA correctly rejected bad RA coordinate: 25:00:00.00
19:23:59.997 SyncToTarget (Bad H) OK Telescope.TargetDeclination correctly rejected bad Dec coordinate: 100:00:00.00
19:24:02.242 SyncToAltAz OK CanSyncAltAz is False and a MethodNotImplementedException exception was generated as expected
SideOfPier Model Tests
19:24:02.320 SideOfPier Model Tests INFO Tests skipped because this driver does Not support SideOfPier Read
Post-run Checks
19:24:02.417 Mount Safety OK Tracking stopped to protect your mount.
Conformance test complete
No errors, warnings or issues found: your driver passes ASCOM validation!!
Driver Hash Value: D41F95CA4DB76F4C2F9742455087821EB82915774F9D97EDF4DAB66B4D74932295DC665B8B90C3FC94AB1B5FA5BAC8009D715FF21C0620CB5F40D8DACFAE67D6
View Git Blame Copy Permalink