ColinD
0afb80bd70
Fixed problem where the telescope area was in mm when it should be mm squared. And the driver was incorrect by a factor of 1000.
2024-12-01 22:42:19 +00:00
ColinD
3ffa9fbe8b
Nuget package updates
2022-11-10 17:57:45 +00:00
ColinD
f788320927
Refactor to use ProfileProperties instead of assigning individual variables.
...
Added support for ApertureArea and ApertureDiameter
2022-05-03 21:57:25 +01:00
ColinD
dc68bb0b4c
Added Focal Length property to telescope setup screen
2022-04-28 23:55:35 +01:00
ColinD
fdd008fcfb
Adding support for sending co-ordinates when scope is parked.
2021-04-24 19:16:36 +01:00
ColinD
eaeae4d66b
Combined the skip prompts and set date time code, to just one check box.
2021-04-24 13:16:08 +01:00
ColinD
e4af93dd07
Added ability to skip the prompts initial connect, and added ability to send the date and time on initial connect
2021-04-21 20:17:00 +01:00
ColinD
d0f12a604a
Made the new serial options dropdownLists to help avoid ID10T errors.
2021-04-09 21:35:19 +01:00
ColinD
bf6203d901
Added support for setting all serial properties.
2021-04-09 19:57:43 +01:00
ColinD
51bf99cb8c
Started adding full serial port settings, so that people can do crazy things at their own risk.
2021-04-09 12:54:25 +01:00
ColinD
db06002ebf
Added support for SlewSettleTime
2021-02-26 00:11:44 +00:00
ColinD
f140e8aee1
Added support for saving the site elevation into the driver profile
2021-01-31 15:52:16 +00:00
ColinD
a59ecaf21d
Added support for being able to enable the Rts/Dtr signals which is needed to Meade LS series scopes
2020-10-13 10:30:43 +01:00
ColinD
4266139429
Removed all # symbols from before the commands, as they're not really needed.
2020-09-03 18:35:40 +01:00
ColinD
8d097fefe1
Added reverse direction feature
2020-06-04 23:31:41 +01:00
ColinD
946fb4b141
Implementation of backlash compensation feature
2020-06-02 23:52:25 +01:00
ColinD
6130cb6d64
Added new feature to allow the guiding style to be forced, Auto = driver decides. Pulse guiding will use the newer pulse guiding technique, Guide rate slew, will use the older technique.
2020-02-27 22:57:19 +00:00
ColinD
0e0ea2d2b0
Code inspections
2019-09-29 19:51:19 +01:00
ColinD
efa78ec8a0
Attempt to make sure that the setup dialog comes up on top of windows.
2019-08-23 18:05:10 +01:00
ColinD
68928a2289
Added a config setting to be able to choose whether the telescope uses high or low precision. Set to Unchanged for the telescope settings to not be altered.
2019-08-18 21:30:22 +01:00
ColinD
027cb24d3f
Added validation to the setup dialog.
2019-07-23 23:42:14 +01:00
ColinD
37437b7c7c
Readded support for guide rate get and set. This will use a default value of 0.67 sidereal rate. But can be overridden by a user.
2019-07-22 15:06:03 +01:00
ColinD
5501e97b7e
Added a call to activate when the setup dialog is shown.
2019-06-04 19:52:44 +01:00
ColinD
d328c3ae4d
Added localisation support
2019-05-20 21:11:16 +01:00
ColinD
79a77d4e1d
Merged in feature/LocalServer (pull request #5 )
...
Feature/LocalServer
* Major refactor. Switching over to a local server hub style driver allowing multiple programs to control the telescope at one time without the need for the POTH Hub
* Unified the setup dialog
* Implemented shared serial port, Both Telescope and Driver can connect at the same time.
* Ported the focuser implementation from the non server based version.
* Ported the telescope driver code.
* Fixed problem with # not being stripped from the returned string ends. Fixed issue with RA being returned as degress rather than hours.
* Telescope passes validation
* Added a lock around the focuser move.
* Reimplemented CommandBlind and CommandString
* Corrected version information
* Removed the Altitude support as there's a bug in the Autostar and Audiostar firmware
2019-05-17 14:21:26 +00:00
ColinD