 ColinD
|
cd776cbc98
|
Added code to override the bypassing of intro prompts
|
2023-10-12 17:30:00 +01:00 |
|
|
ColinD
|
4c7a40a8e4
|
Added extra values to GW translation.
Also added extra log message that includes the hour angle when calculating the destination side of pier.
|
2023-02-22 22:14:38 +00:00 |
|
|
ColinD
|
003dbe059a
|
. doing the trim of the trailing # after writing the log message.
. for LX800 scopes, trying to use a send string instead of send chars for GW command.
|
2023-02-18 22:50:57 +00:00 |
|
|
ColinD
|
c673e0c7d6
|
. doing the trim of the trailing # after writing the log message.
. for LX800 scopes, trying to use a send string instead of send chars for GW command.
|
2023-02-18 22:37:47 +00:00 |
|
|
ColinD
|
5678285e0e
|
Added unit test to make sure that the LX200GPS with german firmware works as expected.
|
2023-01-02 09:31:05 +00:00 |
|
|
ColinD
|
4b78d8fb4f
|
Added code to check for LX200GPS firmware version 4G0m which does not support the GW command.
|
2022-12-31 22:03:39 +00:00 |
|
|
ColinD
|
1ce2afe9ce
|
Trying the Ack command instead to see if this can workaround the CM bug.
|
2022-11-24 15:21:32 +00:00 |
|
|
ColinD
|
d5108cf4db
|
Adding a possible workaround to the Autostart not syncing problem
|
2022-11-23 16:06:38 +00:00 |
|
|
ColinD
|
888ab1aa46
|
Added LX800 series to scope as an autostar II based telescope.
|
2022-11-12 20:50:48 +00:00 |
|
|
ColinD
|
21d1d93235
|
Another attempt at the Dec value
|
2022-11-12 19:16:41 +00:00 |
|
|
ColinD
|
cd304f5955
|
Let's see what this does
|
2022-11-12 17:28:25 +00:00 |
|
|
ColinD
|
da1d1baa30
|
Another tweak for the low preceion code.
|
2022-11-12 16:54:12 +00:00 |
|
|
ColinD
|
a2b15f291d
|
Needed to change one more thing
|
2022-11-12 15:47:35 +00:00 |
|
|
ColinD
|
c380016b71
|
Changes the low precision target so that it's using seconds, instead of a fraction of a minute for the seconds portion of the coordinates.
|
2022-11-12 15:33:49 +00:00 |
|
|
ColinD
|
7afa7458c7
|
Added comments for unit testing
|
2022-11-10 18:05:39 +00:00 |
|
|
ColinD
|
6db59eaef1
|
Corrected Typo in name
|
2022-11-10 17:57:21 +00:00 |
|
|
ColinD
|
cfa7e1d1cf
|
Adding a catch so that when setting the precision, if one mode fails, try the other.
|
2022-11-10 16:53:27 +00:00 |
|
|
ColinD
|
129fc23d83
|
Added an attempt to use the short format to set the TargetRightAscension if the long format fails.
|
2022-11-10 15:30:16 +00:00 |
|
|
ColinD
|
e93da73431
|
Tried trimming a traingin : if it exists, that should not be part of the command sent to the scope.
|
2022-11-10 14:43:41 +00:00 |
|
|
ColinD
|
1e5bb04817
|
Added attempt to set the TargetRightAscension using the other format if one fails.
|
2022-11-10 14:34:10 +00:00 |
|
|
ColinD
|
e851fd0e01
|
Adding support for Audiostar to be returned as a Synonym of Autostar for GW detection.
|
2022-09-25 17:04:24 +01:00 |
|
|
ColinD
|
349397b70f
|
Fixed logging message
|
2022-07-25 21:57:52 +01:00 |
|
|
ColinD
|
7287990240
|
Added messages to include information about what is being sent via the serial port.
|
2022-07-25 16:07:55 +01:00 |
|
|
ColinD
|
6428e6d31b
|
Added the tracelogger to the calls that send the actual serial commands.
|
2022-07-25 15:53:29 +01:00 |
|
|
ColinD
|
faf2692fae
|
Added code to allow pulseguide commands to be sent to telescopes with StarPatch installed.
|
2022-07-19 18:30:26 +01:00 |
|
|
ColinD
|
5f3157a58d
|
Refactored code
Added support for setting the guide rate on the RCX400
|
2022-07-17 12:03:32 +01:00 |
|
|
ColinD
|
5f75916116
|
Added support for RCX400 using newer pulse guiding commands.
Refactored the connect set to be a little less cluttered.
|
2022-07-16 14:17:39 +01:00 |
|
|
ColinD
|
aff44494bc
|
Added long enter and goto commands.
|
2022-07-15 21:08:54 +01:00 |
|
|
ColinD
|
e0d51eae81
|
Removed redundant code.
|
2022-06-29 18:41:51 +01:00 |
|
|
ColinD
|
42f2f45866
|
Added test for StarParch firmware. PulseGuiding is always enabled.
|
2022-06-28 18:47:33 +01:00 |
|
|
ColinD
|
9b2818ddba
|
Added pseudocode for detecting StarPatch firmware
|
2022-06-27 21:55:09 +01:00 |
|
|
ColinD
|
0806696d30
|
Added support for allowing pulse guiding for AltAz telescope using older guiding method.
|
2022-06-27 21:25:58 +01:00 |
|
|
ColinD
|
650fc04bca
|
Changing how side of pier is calculated.
|
2022-05-16 18:59:55 +01:00 |
|
|
ColinD
|
f551081454
|
LX200 Park unit test added.
|
2022-05-14 12:57:00 +01:00 |
|
|
ColinD
|
5c362a5a9a
|
Changed how the part position is calculated.
|
2022-05-10 11:39:40 +01:00 |
|
|
ColinD
|
abb985559e
|
Upgraded error trapping for all the public methods in the driver.
|
2022-05-09 20:06:01 +01:00 |
|
|
ColinD
|
ddd6178416
|
Removed side of pier set that isn't needed.
|
2022-05-09 14:57:40 +01:00 |
|
|
ColinD
|
356377ce36
|
Removed the requirement for GW Support when trying to set the alignment mode.
|
2022-05-09 12:09:59 +01:00 |
|
|
ColinD
|
1b220334d6
|
Added a general try catch to the UnPark method.
|
2022-05-08 15:31:56 +01:00 |
|
|
ColinD
|
bb54356b58
|
Added more loggins to the unparking process
|
2022-05-08 15:22:04 +01:00 |
|
|
ColinD
|
ebca231d9a
|
Made sure that the alignment mode is preserved when parked, across sessions.
|
2022-05-08 15:15:30 +01:00 |
|
|
ColinD
|
2b5205d9c5
|
I think this will allow the LX200Classic to unpark
|
2022-05-08 14:46:53 +01:00 |
|
|
ColinD
|
81d2b98bfe
|
Added ability to unpark the LX200 Classic
|
2022-05-08 14:30:39 +01:00 |
|
|
ColinD
|
554b1af082
|
Maybe this is what's missing to get the telescope to park
|
2022-05-08 13:00:05 +01:00 |
|
|
ColinD
|
70f72e3df7
|
Upgraded the align mode command to have a retry and added support for land mode.
|
2022-05-08 13:00:05 +01:00 |
|
|
ColinD
|
3af02920c4
|
Added more logging to DoSlewAsync, Added a retry to the AltAz Slew.
|
2022-05-08 13:00:05 +01:00 |
|
|
ColinD
|
ede7c33302
|
Added Alt Az coordinates to the connected message.
|
2022-05-08 13:00:05 +01:00 |
|
|
ColinD
|
9866578cab
|
Added more error checks for connected, and found a couple of logic holds in the code that sets the IsConnected property.
|
2022-05-08 12:58:28 +01:00 |
|
|
ColinD
|
d9093635de
|
Added a log message for when connected check fails.
|
2022-05-08 12:58:27 +01:00 |
|
|
ColinD
|
885edba1c5
|
Removed the AL command as I think it's failing
|
2022-05-08 12:58:27 +01:00 |
|