ColinD
7a0ee85af6
Merged in develop (pull request #51 )
...
Develop
* Added an extra test to Slewing so that if connected will check with the mount to see if it's actually slewing, which is should have been doing
* Added extra check to ensure that slewing is return true whilst executing one of the ascom slew commands.
* Tweaked the GetSlewing command hopefully this makes the logic function correctly.
Also upgraded the logging to expose whether it's an internal call or not.
* Another slight tweak to the GetSlewing internal call code.
* Fixed problem where the telescope area was in mm when it should be mm squared. And the driver was incorrect by a factor of 1000.
* Adding more information to the tracelog for get slewing
* Tweaked the code so that the _forceInternal variable doesn't care about if the scope is connected or not.
* Modified the code again, so that the _forceSlewingCount is done last, so that it's at up to date as possible.
2025-01-01 12:10:00 +00:00
ColinD
5b050c45c6
Removing the attmpt to get the LX200 to park
2024-11-12 18:29:41 +00:00
ColinD
bb9fca7e9a
Changing the park Alt for the LX200 to 0.
2024-11-12 16:24:00 +00:00
ColinD
a0878ce153
Finish LX200ClassicParkingPosition
2024-11-06 16:52:24 +00:00
ColinD
80899b8056
Fixed problem where the tracking rate was using the local culture to convert a string to a double.
2024-11-06 16:48:46 +00:00
ColinD
4c7a40a8e4
Added extra values to GW translation.
...
Also added extra log message that includes the hour angle when calculating the destination side of pier.
2023-02-22 22:14:38 +00:00
ColinD
003dbe059a
. doing the trim of the trailing # after writing the log message.
...
. for LX800 scopes, trying to use a send string instead of send chars for GW command.
2023-02-18 22:50:57 +00:00
ColinD
c673e0c7d6
. doing the trim of the trailing # after writing the log message.
...
. for LX800 scopes, trying to use a send string instead of send chars for GW command.
2023-02-18 22:37:47 +00:00
ColinD
5678285e0e
Added unit test to make sure that the LX200GPS with german firmware works as expected.
2023-01-02 09:31:05 +00:00
ColinD
4b78d8fb4f
Added code to check for LX200GPS firmware version 4G0m which does not support the GW command.
2022-12-31 22:03:39 +00:00
ColinD
1ce2afe9ce
Trying the Ack command instead to see if this can workaround the CM bug.
2022-11-24 15:21:32 +00:00
ColinD
d5108cf4db
Adding a possible workaround to the Autostart not syncing problem
2022-11-23 16:06:38 +00:00
ColinD
888ab1aa46
Added LX800 series to scope as an autostar II based telescope.
2022-11-12 20:50:48 +00:00
ColinD
21d1d93235
Another attempt at the Dec value
2022-11-12 19:16:41 +00:00
ColinD
cd304f5955
Let's see what this does
2022-11-12 17:28:25 +00:00
ColinD
da1d1baa30
Another tweak for the low preceion code.
2022-11-12 16:54:12 +00:00
ColinD
a2b15f291d
Needed to change one more thing
2022-11-12 15:47:35 +00:00
ColinD
c380016b71
Changes the low precision target so that it's using seconds, instead of a fraction of a minute for the seconds portion of the coordinates.
2022-11-12 15:33:49 +00:00
ColinD
7afa7458c7
Added comments for unit testing
2022-11-10 18:05:39 +00:00
ColinD
6db59eaef1
Corrected Typo in name
2022-11-10 17:57:21 +00:00
ColinD
cfa7e1d1cf
Adding a catch so that when setting the precision, if one mode fails, try the other.
2022-11-10 16:53:27 +00:00
ColinD
129fc23d83
Added an attempt to use the short format to set the TargetRightAscension if the long format fails.
2022-11-10 15:30:16 +00:00
ColinD
e93da73431
Tried trimming a traingin : if it exists, that should not be part of the command sent to the scope.
2022-11-10 14:43:41 +00:00
ColinD
1e5bb04817
Added attempt to set the TargetRightAscension using the other format if one fails.
2022-11-10 14:34:10 +00:00
ColinD
e851fd0e01
Adding support for Audiostar to be returned as a Synonym of Autostar for GW detection.
2022-09-25 17:04:24 +01:00
ColinD
349397b70f
Fixed logging message
2022-07-25 21:57:52 +01:00
ColinD
7287990240
Added messages to include information about what is being sent via the serial port.
2022-07-25 16:07:55 +01:00
ColinD
6428e6d31b
Added the tracelogger to the calls that send the actual serial commands.
2022-07-25 15:53:29 +01:00
ColinD
faf2692fae
Added code to allow pulseguide commands to be sent to telescopes with StarPatch installed.
2022-07-19 18:30:26 +01:00
ColinD
5f3157a58d
Refactored code
...
Added support for setting the guide rate on the RCX400
2022-07-17 12:03:32 +01:00
ColinD
5f75916116
Added support for RCX400 using newer pulse guiding commands.
...
Refactored the connect set to be a little less cluttered.
2022-07-16 14:17:39 +01:00
ColinD
aff44494bc
Added long enter and goto commands.
2022-07-15 21:08:54 +01:00
ColinD
e0d51eae81
Removed redundant code.
2022-06-29 18:41:51 +01:00
ColinD
42f2f45866
Added test for StarParch firmware. PulseGuiding is always enabled.
2022-06-28 18:47:33 +01:00
ColinD
9b2818ddba
Added pseudocode for detecting StarPatch firmware
2022-06-27 21:55:09 +01:00
ColinD
0806696d30
Added support for allowing pulse guiding for AltAz telescope using older guiding method.
2022-06-27 21:25:58 +01:00
ColinD
650fc04bca
Changing how side of pier is calculated.
2022-05-16 18:59:55 +01:00
ColinD
f551081454
LX200 Park unit test added.
2022-05-14 12:57:00 +01:00
ColinD
5c362a5a9a
Changed how the part position is calculated.
2022-05-10 11:39:40 +01:00
ColinD
abb985559e
Upgraded error trapping for all the public methods in the driver.
2022-05-09 20:06:01 +01:00
ColinD
ddd6178416
Removed side of pier set that isn't needed.
2022-05-09 14:57:40 +01:00
ColinD
356377ce36
Removed the requirement for GW Support when trying to set the alignment mode.
2022-05-09 12:09:59 +01:00
ColinD
1b220334d6
Added a general try catch to the UnPark method.
2022-05-08 15:31:56 +01:00
ColinD
bb54356b58
Added more loggins to the unparking process
2022-05-08 15:22:04 +01:00
ColinD
ebca231d9a
Made sure that the alignment mode is preserved when parked, across sessions.
2022-05-08 15:15:30 +01:00
ColinD
2b5205d9c5
I think this will allow the LX200Classic to unpark
2022-05-08 14:46:53 +01:00
ColinD
81d2b98bfe
Added ability to unpark the LX200 Classic
2022-05-08 14:30:39 +01:00
ColinD
554b1af082
Maybe this is what's missing to get the telescope to park
2022-05-08 13:00:05 +01:00
ColinD
70f72e3df7
Upgraded the align mode command to have a retry and added support for land mode.
2022-05-08 13:00:05 +01:00
ColinD
3af02920c4
Added more logging to DoSlewAsync, Added a retry to the AltAz Slew.
2022-05-08 13:00:05 +01:00
ColinD