ColinD
21d1d93235
Another attempt at the Dec value
2022-11-12 19:16:41 +00:00
ColinD
cd304f5955
Let's see what this does
2022-11-12 17:28:25 +00:00
ColinD
da1d1baa30
Another tweak for the low preceion code.
2022-11-12 16:54:12 +00:00
ColinD
a2b15f291d
Needed to change one more thing
2022-11-12 15:47:35 +00:00
ColinD
c380016b71
Changes the low precision target so that it's using seconds, instead of a fraction of a minute for the seconds portion of the coordinates.
2022-11-12 15:33:49 +00:00
ColinD
7afa7458c7
Added comments for unit testing
2022-11-10 18:05:39 +00:00
ColinD
3ffa9fbe8b
Nuget package updates
2022-11-10 17:57:45 +00:00
ColinD
6db59eaef1
Corrected Typo in name
2022-11-10 17:57:21 +00:00
ColinD
cfa7e1d1cf
Adding a catch so that when setting the precision, if one mode fails, try the other.
2022-11-10 16:53:27 +00:00
ColinD
129fc23d83
Added an attempt to use the short format to set the TargetRightAscension if the long format fails.
2022-11-10 15:30:16 +00:00
ColinD
e93da73431
Tried trimming a traingin : if it exists, that should not be part of the command sent to the scope.
2022-11-10 14:43:41 +00:00
ColinD
1e5bb04817
Added attempt to set the TargetRightAscension using the other format if one fails.
2022-11-10 14:34:10 +00:00
ColinD
e851fd0e01
Adding support for Audiostar to be returned as a Synonym of Autostar for GW detection.
2022-09-25 17:04:24 +01:00
ColinD
349397b70f
Fixed logging message
2022-07-25 21:57:52 +01:00
ColinD
7287990240
Added messages to include information about what is being sent via the serial port.
2022-07-25 16:07:55 +01:00
ColinD
6428e6d31b
Added the tracelogger to the calls that send the actual serial commands.
2022-07-25 15:53:29 +01:00
ColinD
faf2692fae
Added code to allow pulseguide commands to be sent to telescopes with StarPatch installed.
2022-07-19 18:30:26 +01:00
ColinD
5f3157a58d
Refactored code
...
Added support for setting the guide rate on the RCX400
2022-07-17 12:03:32 +01:00
ColinD
5f75916116
Added support for RCX400 using newer pulse guiding commands.
...
Refactored the connect set to be a little less cluttered.
2022-07-16 14:17:39 +01:00
ColinD
aff44494bc
Added long enter and goto commands.
2022-07-15 21:08:54 +01:00
ColinD
e0d51eae81
Removed redundant code.
2022-06-29 18:41:51 +01:00
ColinD
42f2f45866
Added test for StarParch firmware. PulseGuiding is always enabled.
2022-06-28 18:47:33 +01:00
ColinD
9b2818ddba
Added pseudocode for detecting StarPatch firmware
2022-06-27 21:55:09 +01:00
ColinD
0806696d30
Added support for allowing pulse guiding for AltAz telescope using older guiding method.
2022-06-27 21:25:58 +01:00
ColinD
650fc04bca
Changing how side of pier is calculated.
2022-05-16 18:59:55 +01:00
ColinD
f551081454
LX200 Park unit test added.
2022-05-14 12:57:00 +01:00
ColinD
5c362a5a9a
Changed how the part position is calculated.
2022-05-10 11:39:40 +01:00
ColinD
abb985559e
Upgraded error trapping for all the public methods in the driver.
2022-05-09 20:06:01 +01:00
ColinD
ddd6178416
Removed side of pier set that isn't needed.
2022-05-09 14:57:40 +01:00
ColinD
356377ce36
Removed the requirement for GW Support when trying to set the alignment mode.
2022-05-09 12:09:59 +01:00
ColinD
1b220334d6
Added a general try catch to the UnPark method.
2022-05-08 15:31:56 +01:00
ColinD
bb54356b58
Added more loggins to the unparking process
2022-05-08 15:22:04 +01:00
ColinD
ebca231d9a
Made sure that the alignment mode is preserved when parked, across sessions.
2022-05-08 15:15:30 +01:00
ColinD
2b5205d9c5
I think this will allow the LX200Classic to unpark
2022-05-08 14:46:53 +01:00
ColinD
81d2b98bfe
Added ability to unpark the LX200 Classic
2022-05-08 14:30:39 +01:00
ColinD
554b1af082
Maybe this is what's missing to get the telescope to park
2022-05-08 13:00:05 +01:00
ColinD
70f72e3df7
Upgraded the align mode command to have a retry and added support for land mode.
2022-05-08 13:00:05 +01:00
ColinD
3af02920c4
Added more logging to DoSlewAsync, Added a retry to the AltAz Slew.
2022-05-08 13:00:05 +01:00
ColinD
ede7c33302
Added Alt Az coordinates to the connected message.
2022-05-08 13:00:05 +01:00
ColinD
9866578cab
Added more error checks for connected, and found a couple of logic holds in the code that sets the IsConnected property.
2022-05-08 12:58:28 +01:00
ColinD
d9093635de
Added a log message for when connected check fails.
2022-05-08 12:58:27 +01:00
ColinD
885edba1c5
Removed the AL command as I think it's failing
2022-05-08 12:58:27 +01:00
ColinD
1949c50764
Modified the deubgging information.
2022-05-08 12:58:27 +01:00
ColinD
2b7d12fac9
Added some debugging messages
2022-05-08 12:58:26 +01:00
ColinD
f168acc90b
Added work around for LX200 classed to be able to turn tracking off when parking.
2022-05-08 12:58:26 +01:00
ColinD
8f6ea33139
Changes LX200 Park to use Alt 0 Az 0. i.e. Pointing level and North
2022-05-08 12:58:26 +01:00
ColinD
c271f0c4d3
New Park routine for the LX-200 Classic, uses the same technique as the 5.0.4 driver.
2022-05-08 12:58:25 +01:00
ColinD
35a76fe52c
Merged in feature/PortSpeed (pull request #40 )
...
Feature/PortSpeed
* Added support for changing the speed of the autostar
* Added support for changing the speed of the autostar
* Merge remote-tracking branch 'origin/feature/PortSpeed' into feature/PortSpeed
* Upgraded unit testing to make sure that speed changes are properly tested
2022-05-08 11:52:45 +00:00
ColinD
503eec38a3
Added check to ensure that telescope is in Polar Mode when attempting to PulseGuide. CanPulseGuide also fails when scope is in AltAz mode.
2022-05-05 20:40:51 +01:00
ColinD
f788320927
Refactor to use ProfileProperties instead of assigning individual variables.
...
Added support for ApertureArea and ApertureDiameter
2022-05-03 21:57:25 +01:00
ColinD